# git rev-parse -q --verify f2ce1065e767fc7da106a5f5381d1e8f842dc6f4^{commit} f2ce1065e767fc7da106a5f5381d1e8f842dc6f4 already have revision, skipping fetch # git checkout -q -f -B kisskb f2ce1065e767fc7da106a5f5381d1e8f842dc6f4 # git clean -qxdf # < git log -1 # commit f2ce1065e767fc7da106a5f5381d1e8f842dc6f4 # Merge: 9ff01193a20d 8ebebcba559a # Author: Linus Torvalds # Date: Mon Nov 19 09:24:04 2018 -0800 # # Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net # # Pull networking fixes from David Miller: # # 1) Fix some potentially uninitialized variables and use-after-free in # kvaser_usb can drier, from Jimmy Assarsson. # # 2) Fix leaks in qed driver, from Denis Bolotin. # # 3) Socket leak in l2tp, from Xin Long. # # 4) RSS context allocation fix in bnxt_en from Michael Chan. # # 5) Fix cxgb4 build errors, from Ganesh Goudar. # # 6) Route leaks in ipv6 when removing exceptions, from Xin Long. # # 7) Memory leak in IDR allocation handling of act_pedit, from Davide # Caratti. # # 8) Use-after-free of bridge vlan stats, from Nikolay Aleksandrov. # # 9) When MTU is locked, do not force DF bit on ipv4 tunnels. From # Sabrina Dubroca. # # 10) When NAPI cached skb is reused, we must set it to the proper initial # state which includes skb->pkt_type. From Eric Dumazet. # # 11) Lockdep and non-linear SKB handling fix in tipc from Jon Maloy. # # 12) Set RX queue properly in various tuntap receive paths, from Matthew # Cover. # # * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) # tuntap: fix multiqueue rx # ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRF # tipc: don't assume linear buffer when reading ancillary data # tipc: fix lockdep warning when reinitilaizing sockets # net-gro: reset skb->pkt_type in napi_reuse_skb() # tc-testing: tdc.py: Guard against lack of returncode in executed command # tc-testing: tdc.py: ignore errors when decoding stdout/stderr # ip_tunnel: don't force DF when MTU is locked # MAINTAINERS: Add entry for CAKE qdisc # net: bridge: fix vlan stats use-after-free on destruction # socket: do a generic_file_splice_read when proto_ops has no splice_read # net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs # Revert "net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs" # net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs # net/sched: act_pedit: fix memory leak when IDR allocation fails # net: lantiq: Fix returned value in case of error in 'xrx200_probe()' # ipv6: fix a dst leak when removing its exception # net: mvneta: Don't advertise 2.5G modes # drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typo # net/mlx4: Fix UBSAN warning of signed integer overflow # ... # < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc --version # < git log --format=%s --max-count=1 f2ce1065e767fc7da106a5f5381d1e8f842dc6f4 # < make -s -j 48 ARCH=powerpc O=/kisskb/build/linus-rand_powerpc-randconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- randconfig KCONFIG_SEED=0xD960EB2A # Added to kconfig CONFIG_STANDALONE=y # Added to kconfig CONFIG_BUILD_DOCSRC=n # Added to kconfig CONFIG_MODULE_SIG=n # Added to kconfig CONFIG_CPU_BIG_ENDIAN=y # Added to kconfig CONFIG_PPC64=y # Added to kconfig CONFIG_PPC_DISABLE_WERROR=y # Added to kconfig CONFIG_SECTION_MISMATCH_WARN_ONLY=y # Added to kconfig CONFIG_PREVENT_FIRMWARE_BUILD=y # Added to kconfig CONFIG_CC_STACKPROTECTOR_STRONG=n # Added to kconfig CONFIG_GCC_PLUGINS=n # Added to kconfig CONFIG_LD_HEAD_STUB_CATCH=y # Added to kconfig # yes \n | make -s -j 48 ARCH=powerpc O=/kisskb/build/linus-rand_powerpc-randconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- oldconfig yes: standard output: Broken pipe # make -s -j 48 ARCH=powerpc O=/kisskb/build/linus-rand_powerpc-randconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- /kisskb/src/scripts/unifdef.c: In function 'Mpass': /kisskb/src/scripts/unifdef.c:453:28: warning: 'strncpy' output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation] static void Mpass (void) { strncpy(keyword, "if ", 4); Pelif(); } ^~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/powerpc/boot/dts/icon.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/icon.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/icon.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mpc8555cds.dtb: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/makalu.dtb: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/makalu.dtb: Warning (pci_bridge): /plb/pciex@c0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/makalu.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/bluestone.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/bluestone.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/bluestone.dtb: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" arch/powerpc/boot/dts/o2mnt.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2mnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2mnt.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2mnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/fsl/p1025rdb_32b.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1025rdb_32b.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mgcoge.dtb: Warning (spi_bus_reg): /soc@f0000000/cpm@119c0/spi@11aa0/ds3106@1: SPI bus unit address format error, expected "0" arch/powerpc/boot/dts/motionpro.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/motionpro.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1020rdb_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pd.dtb: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dtb: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/akebono.dtb: Warning (pci_bridge): /plb/pciex@10100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_bridge): /plb/pciex@20100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_bridge): /plb/pciex@18100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_bridge): /plb/pciex@28100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc310.dtb: Warning (interrupts_property): /pcie@fef08000: Missing #interrupt-cells in interrupt-parent arch/powerpc/boot/dts/uc101.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/uc101.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dtb: Warning (interrupts_property): /pcie@ffe08000: Missing #interrupt-cells in interrupt-parent arch/powerpc/boot/dts/a3m071.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/a3m071.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1020rdb.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/o2d.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2d.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2d.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/cm5200.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/cm5200.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/haleakala.dtb: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/haleakala.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1025rdb_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1025rdb_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/katmai.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dtb: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2i.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2i.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2i.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2i.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/currituck.dtb: Warning (pci_bridge): /plb/pciex@10100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dtb: Warning (pci_bridge): /plb/pciex@30100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dtb: Warning (pci_bridge): /plb/pciex@38100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/xpedite5200_xmon.dtb: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc832x_rdb.dtb: Warning (interrupts_property): /qe@e0100000/mdio@3120/ethernet-phy@0:#interrupt-cells: size is (4), expected multiple of 8 arch/powerpc/boot/dts/mpc832x_rdb.dtb: Warning (interrupts_property): /qe@e0100000/mdio@3120/ethernet-phy@4:#interrupt-cells: size is (4), expected multiple of 8 arch/powerpc/boot/dts/mpc8610_hpcd.dtb: Warning (pci_device_bus_num): /pcie@e000a000/pcie@0:bus-range: PCI bus number 0 out of range, expected (1 - 1) arch/powerpc/boot/dts/canyonlands.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/canyonlands.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/canyonlands.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/stxssa8555.dtb: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/glacier.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/glacier.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/glacier.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2dnt2.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2dnt2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2dnt2.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2dnt2.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/o3dnt.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o3dnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o3dnt.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o3dnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property arch/powerpc/boot/dts/fsl/mpc8541cds.dtb: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/redwood.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dtb: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/kilauea.dtb: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/kilauea.dtb: Warning (pci_bridge): /plb/pciex@c0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/kilauea.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dtb: Warning (interrupts_property): /pcie@fffe08000: Missing #interrupt-cells in interrupt-parent arch/powerpc/boot/dts/o2d300.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d300.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2d300.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2d300.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/xpedite5200.dtb: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" arch/powerpc/boot/dts/virtex440-ml510.dtb: Warning (pci_bridge): /plb@0/plbv46-pci@85e00000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/virtex440-ml510.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe250000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe250000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe260000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe260000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe270000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe270000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/kernel/eeh.c:1752:12: warning: 'proc_eeh_show' defined but not used [-Wunused-function] static int proc_eeh_show(struct seq_file *m, void *v) ^ /kisskb/src/fs/jffs2/xattr.c: In function 'jffs2_build_xattr_subsystem': /kisskb/src/fs/jffs2/xattr.c:887:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] } ^ /kisskb/src/drivers/i2c/busses/i2c-nvidia-gpu.c:344:12: warning: 'gpu_i2c_resume' defined but not used [-Wunused-function] static int gpu_i2c_resume(struct device *dev) ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/soc15.c: In function 'soc15_set_ip_blocks': /kisskb/src/drivers/gpu/drm/amd/amdgpu/soc15.c:542:3: warning: #warning "Enable CONFIG_DRM_AMD_DC for display support on SOC15." [-Wcpp] # warning "Enable CONFIG_DRM_AMD_DC for display support on SOC15." ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/soc15.c:563:3: warning: #warning "Enable CONFIG_DRM_AMD_DC for display support on SOC15." [-Wcpp] # warning "Enable CONFIG_DRM_AMD_DC for display support on SOC15." ^ /kisskb/src/drivers/usb/misc/usbtest.c: In function 'test_queue': /kisskb/src/drivers/usb/misc/usbtest.c:2128:1: warning: the frame size of 1232 bytes is larger than 1024 bytes [-Wframe-larger-than=] } ^ Completed OK # rm -rf /kisskb/build/linus-rand_powerpc-randconfig_powerpc-gcc5 # Build took: 0:04:22.000790