Buildresult: powerpc-next/ppc64_book3e_allmodconfig/powerpc-gcc8 built on Dec 21 2018, 23:50

kisskb

Revisions | Branches | Compilers | Configs | Build Results | Build Failures |

Status:	Failed
Date/Time:	Dec 21 2018, 23:50
Duration:	0:13:11.423263
Builder:	ka1
Revision:	vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver (`7f92891778dff62303c070ac81de7b7d80de331a)`
Target:	powerpc-next/ppc64_book3e_allmodconfig/powerpc-gcc8
Branch:	powerpc-next
Compiler:	powerpc-gcc8 (powerpc64-linux-gcc (GCC) 8.1.0 / GNU ld (GNU Binutils) 2.30)
Config:	ppc64_book3e_allmodconfig (download)
Log:	Download original Possible errors arch/powerpc/boot/dts/bluestone.dtb: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" arch/powerpc/boot/dts/mgcoge.dtb: Warning (spi_bus_reg): /soc@f0000000/cpm@119c0/spi@11aa0/ds3106@1: SPI bus unit address format error, expected "0" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dtb: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dtb: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" arch/powerpc/boot/dts/xpedite5200_xmon.dtb: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" arch/powerpc/boot/dts/xpedite5200.dtb: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_bridge): I2C bus unit address format error, expected "34" phy-fsl-usb.c:(.text.fsl_otg_ioctl+0xb4): undefined reference to `.otg_statemachine' phy-fsl-usb.c:(.text.fsl_otg_start_srp+0x4c): undefined reference to `.otg_statemachine' phy-fsl-usb.c:(.text.fsl_otg_set_host+0xd0): undefined reference to `.otg_statemachine' phy-fsl-usb.c:(.text.fsl_otg_start_hnp+0x68): undefined reference to `.otg_statemachine' phy-fsl-usb.c:(.text.show_fsl_usb2_otg_state+0x154): undefined reference to `.usb_otg_state_string' (.text.a_wait_enum+0x4c): undefined reference to `.otg_statemachine' phy-fsl-usb.c:(.text.fsl_otg_set_peripheral+0x84): undefined reference to `.usb_gadget_vbus_disconnect' phy-fsl-usb.c:(.text.fsl_otg_set_peripheral+0x9c): undefined reference to `.otg_statemachine' make[1]: * [Makefile:1036: vmlinux] Error 1 make: * [Makefile:152: sub-make] Error 2 Possible warnings (154) scripts/unifdef.c:453:28: warning: 'strncpy' output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation] arch/powerpc/boot/dts/icon.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/icon.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/icon.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2mnt.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2mnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2mnt.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2mnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/bluestone.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/bluestone.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/bluestone.dtb: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" arch/powerpc/boot/dts/makalu.dtb: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/makalu.dtb: Warning (pci_bridge): /plb/pciex@c0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/makalu.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1025rdb_32b.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1025rdb_32b.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/mpc8555cds.dtb: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/mgcoge.dtb: Warning (spi_bus_reg): /soc@f0000000/cpm@119c0/spi@11aa0/ds3106@1: SPI bus unit address format error, expected "0" arch/powerpc/boot/dts/motionpro.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/motionpro.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1020rdb_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1020rdb-pd.dtb: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dtb: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" arch/powerpc/boot/dts/uc101.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/uc101.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/akebono.dtb: Warning (pci_bridge): /plb/pciex@10100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_bridge): /plb/pciex@20100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_bridge): /plb/pciex@18100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_bridge): /plb/pciex@28100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dtb: Warning (interrupts_property): /pcie@ffe08000: Missing #interrupt-cells in interrupt-parent arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/o2d.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2d.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2d.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/a3m071.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/a3m071.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc310.dtb: Warning (interrupts_property): /pcie@fef08000: Missing #interrupt-cells in interrupt-parent arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/cm5200.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/cm5200.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/haleakala.dtb: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/haleakala.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2i.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2i.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2i.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2i.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/currituck.dtb: Warning (pci_bridge): /plb/pciex@10100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dtb: Warning (pci_bridge): /plb/pciex@30100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dtb: Warning (pci_bridge): /plb/pciex@38100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/katmai.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dtb: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/xpedite5200_xmon.dtb: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" arch/powerpc/boot/dts/fsl/p1020rdb.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/canyonlands.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/canyonlands.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/canyonlands.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc832x_rdb.dtb: Warning (interrupts_property): /qe@e0100000/mdio@3120/ethernet-phy@0:#interrupt-cells: size is (4), expected multiple of 8 arch/powerpc/boot/dts/mpc832x_rdb.dtb: Warning (interrupts_property): /qe@e0100000/mdio@3120/ethernet-phy@4:#interrupt-cells: size is (4), expected multiple of 8 arch/powerpc/boot/dts/stxssa8555.dtb: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/fsl/p1025rdb_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1025rdb_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/mpc8610_hpcd.dtb: Warning (pci_device_bus_num): /pcie@e000a000/pcie@0:bus-range: PCI bus number 0 out of range, expected (1 - 1) arch/powerpc/boot/dts/glacier.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/glacier.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/glacier.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o3dnt.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o3dnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o3dnt.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o3dnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/o2dnt2.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2dnt2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2dnt2.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2dnt2.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/redwood.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dtb: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/kilauea.dtb: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/kilauea.dtb: Warning (pci_bridge): /plb/pciex@c0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/kilauea.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2d300.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d300.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2d300.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2d300.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/xpedite5200.dtb: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_bridge): I2C bus unit address format error, expected "34" arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/virtex440-ml510.dtb: Warning (pci_bridge): /plb@0/plbv46-pci@85e00000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/virtex440-ml510.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property arch/powerpc/boot/dts/fsl/mpc8541cds.dtb: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dtb: Warning (interrupts_property): /pcie@fffe08000: Missing #interrupt-cells in interrupt-parent arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe250000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe250000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe260000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe260000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe270000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe270000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' include/linux/string.h:253:9: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-overflow=] include/linux/string.h:253:9: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-overflow=] drivers/net/ethernet/aurora/nb8800.h:92: warning: "TCR_DIE" redefined drivers/scsi/esas2r/esas2r_ioctl.c:1910:19: warning: 'dma_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] /opt/cross/kisskb/korg/gcc-8.1.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash'. Full Log # git rev-parse -q --verify 7f92891778dff62303c070ac81de7b7d80de331a^{commit} 7f92891778dff62303c070ac81de7b7d80de331a already have revision, skipping fetch # git checkout -q -f -B kisskb 7f92891778dff62303c070ac81de7b7d80de331a # git clean -qxdf # < git log -1 # commit 7f92891778dff62303c070ac81de7b7d80de331a # Author: Alexey Kardashevskiy <aik@ozlabs.ru> # Date: Thu Dec 20 12:10:36 2018 +1100 # # vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver # # POWER9 Witherspoon machines come with 4 or 6 V100 GPUs which are not # pluggable PCIe devices but still have PCIe links which are used # for config space and MMIO. In addition to that the GPUs have 6 NVLinks # which are connected to other GPUs and the POWER9 CPU. POWER9 chips # have a special unit on a die called an NPU which is an NVLink2 host bus # adapter with p2p connections to 2 to 3 GPUs, 3 or 2 NVLinks to each. # These systems also support ATS (address translation services) which is # a part of the NVLink2 protocol. Such GPUs also share on-board RAM # (16GB or 32GB) to the system via the same NVLink2 so a CPU has # cache-coherent access to a GPU RAM. # # This exports GPU RAM to the userspace as a new VFIO device region. This # preregisters the new memory as device memory as it might be used for DMA. # This inserts pfns from the fault handler as the GPU memory is not onlined # until the vendor driver is loaded and trained the NVLinks so doing this # earlier causes low level errors which we fence in the firmware so # it does not hurt the host system but still better be avoided; for the same # reason this does not map GPU RAM into the host kernel (usual thing for # emulated access otherwise). # # This exports an ATSD (Address Translation Shootdown) register of NPU which # allows TLB invalidations inside GPU for an operating system. The register # conveniently occupies a single 64k page. It is also presented to # the userspace as a new VFIO device region. One NPU has 8 ATSD registers, # each of them can be used for TLB invalidation in a GPU linked to this NPU. # This allocates one ATSD register per an NVLink bridge allowing passing # up to 6 registers. Due to the host firmware bug (just recently fixed), # only 1 ATSD register per NPU was actually advertised to the host system # so this passes that alone register via the first NVLink bridge device in # the group which is still enough as QEMU collects them all back and # presents to the guest via vPHB to mimic the emulated NPU PHB on the host. # # In order to provide the userspace with the information about GPU-to-NVLink # connections, this exports an additional capability called "tgt" # (which is an abbreviated host system bus address). The "tgt" property # tells the GPU its own system address and allows the guest driver to # conglomerate the routing information so each GPU knows how to get directly # to the other GPUs. # # For ATS to work, the nest MMU (an NVIDIA block in a P9 CPU) needs to # know LPID (a logical partition ID or a KVM guest hardware ID in other # words) and PID (a memory context ID of a userspace process, not to be # confused with a linux pid). This assigns a GPU to LPID in the NPU and # this is why this adds a listener for KVM on an IOMMU group. A PID comes # via NVLink from a GPU and NPU uses a PID wildcard to pass it through. # # This requires coherent memory and ATSD to be available on the host as # the GPU vendor only supports configurations with both features enabled # and other configurations are known not to work. Because of this and # because of the ways the features are advertised to the host system # (which is a device tree with very platform specific properties), # this requires enabled POWERNV platform. # # The V100 GPUs do not advertise any of these capabilities via the config # space and there are more than just one device ID so this relies on # the platform to tell whether these GPUs have special abilities such as # NVLinks. # # Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> # Acked-by: Alex Williamson <alex.williamson@redhat.com> # Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> # < /opt/cross/kisskb/korg/gcc-8.1.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc --version # < /opt/cross/kisskb/korg/gcc-8.1.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld --version # < git log --format=%s --max-count=1 7f92891778dff62303c070ac81de7b7d80de331a # < make -s -j 48 ARCH=powerpc O=/kisskb/build/powerpc-next_ppc64_book3e_allmodconfig_powerpc-gcc8 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-8.1.0-nolibc/powerpc64-linux/bin/powerpc64-linux- ppc64_book3e_allmodconfig # make -s -j 48 ARCH=powerpc O=/kisskb/build/powerpc-next_ppc64_book3e_allmodconfig_powerpc-gcc8 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-8.1.0-nolibc/powerpc64-linux/bin/powerpc64-linux- /kisskb/src/scripts/unifdef.c: In function 'Mpass': /kisskb/src/scripts/unifdef.c:453:28: warning: 'strncpy' output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation] static void Mpass (void) { strncpy(keyword, "if ", 4); Pelif(); } ^~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/powerpc/boot/dts/icon.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/icon.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/icon.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2mnt.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2mnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2mnt.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2mnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/bluestone.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/bluestone.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/bluestone.dtb: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" arch/powerpc/boot/dts/makalu.dtb: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/makalu.dtb: Warning (pci_bridge): /plb/pciex@c0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/makalu.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1025rdb_32b.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1025rdb_32b.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/mpc8555cds.dtb: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/mgcoge.dtb: Warning (spi_bus_reg): /soc@f0000000/cpm@119c0/spi@11aa0/ds3106@1: SPI bus unit address format error, expected "0" arch/powerpc/boot/dts/motionpro.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/motionpro.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1020rdb_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1020rdb-pd.dtb: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dtb: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" arch/powerpc/boot/dts/uc101.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/uc101.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/akebono.dtb: Warning (pci_bridge): /plb/pciex@10100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_bridge): /plb/pciex@20100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_bridge): /plb/pciex@18100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_bridge): /plb/pciex@28100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dtb: Warning (interrupts_property): /pcie@ffe08000: Missing #interrupt-cells in interrupt-parent arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/o2d.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2d.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2d.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/a3m071.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/a3m071.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc310.dtb: Warning (interrupts_property): /pcie@fef08000: Missing #interrupt-cells in interrupt-parent arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/cm5200.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/cm5200.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/haleakala.dtb: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/haleakala.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2i.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2i.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2i.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2i.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/currituck.dtb: Warning (pci_bridge): /plb/pciex@10100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dtb: Warning (pci_bridge): /plb/pciex@30100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dtb: Warning (pci_bridge): /plb/pciex@38100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/katmai.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dtb: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/xpedite5200_xmon.dtb: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" arch/powerpc/boot/dts/fsl/p1020rdb.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/canyonlands.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/canyonlands.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/canyonlands.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc832x_rdb.dtb: Warning (interrupts_property): /qe@e0100000/mdio@3120/ethernet-phy@0:#interrupt-cells: size is (4), expected multiple of 8 arch/powerpc/boot/dts/mpc832x_rdb.dtb: Warning (interrupts_property): /qe@e0100000/mdio@3120/ethernet-phy@4:#interrupt-cells: size is (4), expected multiple of 8 arch/powerpc/boot/dts/stxssa8555.dtb: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/fsl/p1025rdb_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1025rdb_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/mpc8610_hpcd.dtb: Warning (pci_device_bus_num): /pcie@e000a000/pcie@0:bus-range: PCI bus number 0 out of range, expected (1 - 1) arch/powerpc/boot/dts/glacier.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/glacier.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/glacier.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o3dnt.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o3dnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o3dnt.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o3dnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/o2dnt2.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2dnt2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2dnt2.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2dnt2.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/redwood.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dtb: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/kilauea.dtb: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/kilauea.dtb: Warning (pci_bridge): /plb/pciex@c0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/kilauea.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2d300.dtb: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d300.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/o2d300.dtb: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2d300.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dtb: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/xpedite5200.dtb: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_bridge): I2C bus unit address format error, expected "34" /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/virtex440-ml510.dtb: Warning (pci_bridge): /plb@0/plbv46-pci@85e00000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/virtex440-ml510.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property arch/powerpc/boot/dts/fsl/mpc8541cds.dtb: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dtb: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dtb: Warning (interrupts_property): /pcie@fffe08000: Missing #interrupt-cells in interrupt-parent arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe250000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe250000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe260000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe260000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe270000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_bridge): /pcie@ffe270000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcent2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' In file included from /kisskb/src/arch/powerpc/include/asm/paca.h:19, from /kisskb/src/arch/powerpc/include/asm/current.h:16, from /kisskb/src/include/linux/sched.h:12, from /kisskb/src/kernel/debug/kdb/kdb_support.c:15: In function 'strncpy', inlined from 'kallsyms_symbol_next' at /kisskb/src/kernel/debug/kdb/kdb_support.c:239:4: /kisskb/src/include/linux/string.h:253:9: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-overflow=] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /kisskb/src/kernel/debug/kdb/kdb_support.c: In function 'kallsyms_symbol_next': /kisskb/src/include/linux/string.h:274:10: note: length computed here return __builtin_strlen(p); ^~~~~~~~~~~~~~~~~~~ In file included from /kisskb/src/arch/powerpc/include/asm/paca.h:19, from /kisskb/src/arch/powerpc/include/asm/hw_irq.h:64, from /kisskb/src/arch/powerpc/include/asm/irqflags.h:12, from /kisskb/src/include/linux/irqflags.h:16, from /kisskb/src/include/linux/spinlock.h:54, from /kisskb/src/include/linux/seqlock.h:36, from /kisskb/src/include/linux/time.h:6, from /kisskb/src/include/linux/stat.h:19, from /kisskb/src/include/linux/module.h:10, from /kisskb/src/lib/test_hexdump.c:8: In function 'strncpy', inlined from 'test_hexdump_prepare_test.isra.0' at /kisskb/src/lib/test_hexdump.c:102:3: /kisskb/src/include/linux/string.h:253:9: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-overflow=] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /kisskb/src/lib/test_hexdump.c: In function 'test_hexdump_prepare_test.isra.0': /kisskb/src/include/linux/string.h:274:10: note: length computed here return __builtin_strlen(p); ^~~~~~~~~~~~~~~~~~~ In file included from /kisskb/src/drivers/net/ethernet/aurora/nb8800.c:40: /kisskb/src/drivers/net/ethernet/aurora/nb8800.h:92: warning: "TCR_DIE" redefined #define TCR_DIE BIT(7) In file included from /kisskb/src/arch/powerpc/include/asm/reg.h:21, from /kisskb/src/arch/powerpc/include/asm/processor.h:13, from /kisskb/src/arch/powerpc/include/asm/thread_info.h:28, from /kisskb/src/include/linux/thread_info.h:38, from /kisskb/src/include/asm-generic/preempt.h:5, from ./arch/powerpc/include/generated/asm/preempt.h:1, from /kisskb/src/include/linux/preempt.h:81, from /kisskb/src/include/linux/spinlock.h:51, from /kisskb/src/include/linux/seqlock.h:36, from /kisskb/src/include/linux/time.h:6, from /kisskb/src/include/linux/stat.h:19, from /kisskb/src/include/linux/module.h:10, from /kisskb/src/drivers/net/ethernet/aurora/nb8800.c:23: /kisskb/src/arch/powerpc/include/asm/reg_booke.h:554: note: this is the location of the previous definition #define TCR_DIE TCR_PIE /* DEC Interrupt Enable / /kisskb/src/drivers/scsi/esas2r/esas2r_ioctl.c: In function 'esas2r_write_vda': /kisskb/src/drivers/scsi/esas2r/esas2r_ioctl.c:1910:19: warning: 'dma_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] a->ppvda_buffer = dma_addr; ~~~~~~~~~~~~~~~~^~~~~~~~~~ ./usr/include/linux/v4l2-controls.h:1105: found __[us]{8,16,32,64} type without #include <linux/types.h> /opt/cross/kisskb/korg/gcc-8.1.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash'. drivers/usb/phy/phy-fsl-usb.o: In function `.fsl_otg_ioctl': phy-fsl-usb.c:(.text.fsl_otg_ioctl+0xb4): undefined reference to `.otg_statemachine' drivers/usb/phy/phy-fsl-usb.o: In function `.fsl_otg_start_srp': phy-fsl-usb.c:(.text.fsl_otg_start_srp+0x4c): undefined reference to `.otg_statemachine' drivers/usb/phy/phy-fsl-usb.o: In function `.fsl_otg_set_host': phy-fsl-usb.c:(.text.fsl_otg_set_host+0xd0): undefined reference to `.otg_statemachine' drivers/usb/phy/phy-fsl-usb.o: In function `.fsl_otg_start_hnp': phy-fsl-usb.c:(.text.fsl_otg_start_hnp+0x68): undefined reference to `.otg_statemachine' drivers/usb/phy/phy-fsl-usb.o: In function `.show_fsl_usb2_otg_state': phy-fsl-usb.c:(.text.show_fsl_usb2_otg_state+0x154): undefined reference to `.usb_otg_state_string' drivers/usb/phy/phy-fsl-usb.o: In function `.a_wait_enum': (.text.a_wait_enum+0x4c): undefined reference to `.otg_statemachine' drivers/usb/phy/phy-fsl-usb.o: In function `.fsl_otg_set_peripheral': phy-fsl-usb.c:(.text.fsl_otg_set_peripheral+0x84): undefined reference to `.usb_gadget_vbus_disconnect' phy-fsl-usb.c:(.text.fsl_otg_set_peripheral+0x9c): undefined reference to `.otg_statemachine' make[1]: [/kisskb/src/Makefile:1036: vmlinux] Error 1 make: * [Makefile:152: sub-make] Error 2 Command 'make -s -j 48 ARCH=powerpc O=/kisskb/build/powerpc-next_ppc64_book3e_allmodconfig_powerpc-gcc8 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-8.1.0-nolibc/powerpc64-linux/bin/powerpc64-linux- ' returned non-zero exit status 2 # rm -rf /kisskb/build/powerpc-next_ppc64_book3e_allmodconfig_powerpc-gcc8 # Build took: 0:13:11.423263

© Michael Ellerman 2006-2018.