Buildresult: gustavoars/ppc64_book3e_allmodconfig/powerpc-gcc9 built on Feb 25 2020, 02:41

kisskb

Revisions | Branches | Compilers | Configs | Build Results | Build Failures |

Status:	OK
Date/Time:	Feb 25 2020, 02:41
Duration:	0:21:30.251123
Builder:	blade46
Revision:	firmware: dmi-sysfs: Replace zero-length array with flexible-array member (`b86f936658ba1882f799d3b4328cd7e1c5839e43)`
Target:	gustavoars/ppc64_book3e_allmodconfig/powerpc-gcc9
Branch:	gustavoars
Compiler:	powerpc-gcc9 (powerpc64-linux-gcc (GCC) 9.2.0 / GNU ld (GNU Binutils) 2.32)
Config:	ppc64_book3e_allmodconfig (download)
Log:	Download original Possible warnings (156) warning: The last gc run reported the following. Please correct the root cause warning: There are too many unreachable loose objects; run 'git prune' to remove them. arch/powerpc/boot/dts/virtex440-ml510.dts:335.37-439.6: Warning (pci_bridge): /plb@0/plbv46-pci@85e00000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/virtex440-ml510.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/icon.dts:318.26-357.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/icon.dts:359.26-398.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/icon.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/makalu.dts:271.25-310.5: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/makalu.dts:312.25-351.5: Warning (pci_bridge): /plb/pciex@c0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/makalu.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:52.9-67.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property arch/powerpc/boot/dts/fsl/mpc8541cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/motionpro.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/mgcoge.dts:230.14-234.7: Warning (spi_bus_reg): /soc@f0000000/cpm@119c0/spi@11aa0/ds3106@1: SPI bus unit address format error, expected "0" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/uc101.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/akebono.dts:251.28-289.5: Warning (pci_bridge): /plb/pciex@10100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dts:291.28-329.5: Warning (pci_bridge): /plb/pciex@20100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dts:331.28-369.5: Warning (pci_bridge): /plb/pciex@18100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dts:371.28-409.5: Warning (pci_bridge): /plb/pciex@28100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/a3m071.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mpc8555cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2d.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/cm5200.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/haleakala.dts:240.25-279.5: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/haleakala.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/bluestone.dts:328.26-368.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/bluestone.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" arch/powerpc/boot/dts/katmai.dts:322.26-361.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dts:363.26-402.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dts:404.26-443.5: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2i.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2i.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/currituck.dts:125.28-161.5: Warning (pci_bridge): /plb/pciex@10100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dts:163.28-198.5: Warning (pci_bridge): /plb/pciex@30100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dts:200.28-235.5: Warning (pci_bridge): /plb/pciex@38100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/xpedite5200_xmon.dts:139.11-142.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc8610_hpcd.dts:420.3-21: Warning (pci_device_bus_num): /pcie@e000a000/pcie@0:bus-range: PCI bus number 0 out of range, expected (1 - 1) arch/powerpc/boot/dts/canyonlands.dts:464.26-504.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/canyonlands.dts:506.26-546.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/canyonlands.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2mnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2mnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/glacier.dts:492.26-532.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/glacier.dts:534.26-574.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/glacier.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/stxssa8555.dts:329.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2dnt2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o3dnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2dnt2.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o3dnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/redwood.dts:238.26-277.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dts:279.26-318.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dts:320.26-359.5: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/kilauea.dts:325.25-364.5: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/kilauea.dts:366.25-405.5: Warning (pci_bridge): /plb/pciex@c0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/kilauea.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d300.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2d300.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/xpedite5200.dts:135.11-138.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of 'const char[1]' [-Warray-bounds] arch/powerpc/include/asm/epapr_hcalls.h:299:20: warning: array subscript 2 is outside array bounds of 'const char[1]' [-Warray-bounds] arch/powerpc/include/asm/epapr_hcalls.h:300:20: warning: array subscript 3 is outside array bounds of 'const char[1]' [-Warray-bounds] arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of 'const char[1]' [-Warray-bounds] arch/powerpc/include/asm/epapr_hcalls.h:299:20: warning: array subscript 2 is outside array bounds of 'const char[1]' [-Warray-bounds] arch/powerpc/include/asm/epapr_hcalls.h:300:20: warning: array subscript 3 is outside array bounds of 'const char[1]' [-Warray-bounds] drivers/usb/host/fhci-hcd.c:398:8: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/aurora/nb8800.h:92: warning: "TCR_DIE" redefined drivers/usb/gadget/udc/fsl_qe_udc.c:836:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/usb/gadget/udc/fsl_qe_udc.c:837:28: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/usb/gadget/udc/fsl_qe_udc.c:964:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/usb/gadget/udc/fsl_qe_udc.c:965:28: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/usb/gadget/udc/fsl_qe_udc.c:1490:12: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/usb/gadget/udc/fsl_qe_udc.c:1491:27: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/usb/gadget/udc/fsl_qe_udc.c:542:37: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/usb/gadget/udc/fsl_qe_udc.c:563:8: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/usb/gadget/udc/fsl_qe_udc.c:566:8: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/usb/gadget/udc/fsl_qe_udc.c:580:8: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/usb/gadget/udc/fsl_qe_udc.c:596:5: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/usb/gadget/udc/fsl_qe_udc.c:1840:14: warning: 'udc' may be used uninitialized in this function [-Wmaybe-uninitialized] /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash' /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash' /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash' WARNING: 140 bad relocations WARNING: You need at least binutils >= 2.19 to build a CONFIG_RELOCATABLE kernel Full Log # git rev-parse -q --verify b86f936658ba1882f799d3b4328cd7e1c5839e43^{commit} # git fetch -q -n -f https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git for-next/kspp warning: The last gc run reported the following. Please correct the root cause and remove .git/gc.log. Automatic cleanup will not be performed until the file is removed. warning: There are too many unreachable loose objects; run 'git prune' to remove them. # git rev-parse -q --verify b86f936658ba1882f799d3b4328cd7e1c5839e43^{commit} b86f936658ba1882f799d3b4328cd7e1c5839e43 # git checkout -q -f -B kisskb b86f936658ba1882f799d3b4328cd7e1c5839e43 # git clean -qxdf # < git log -1 # commit b86f936658ba1882f799d3b4328cd7e1c5839e43 # Author: Gustavo A. R. Silva <gustavo@embeddedor.com> # Date: Fri Feb 21 09:15:44 2020 -0600 # # firmware: dmi-sysfs: Replace zero-length array with flexible-array member # # The current codebase makes use of the zero-length array language # extension to the C90 standard, but the preferred mechanism to declare # variable-length types such as these ones is a flexible array member[1][2], # introduced in C99: # # struct foo { # int stuff; # struct boo array[]; # }; # # By making use of the mechanism above, we will get a compiler warning # in case the flexible array does not occur last in the structure, which # will help us prevent some kind of undefined behavior bugs from being # inadvertently introduced[3] to the codebase from now on. # # Also, notice that, dynamic memory allocations won't be affected by # this change: # # "Flexible array members have incomplete type, and so the sizeof operator # may not be applied. As a quirk of the original implementation of # zero-length arrays, sizeof evaluates to zero."[1] # # This issue was found with the help of Coccinelle. # # [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html # [2] https://github.com/KSPP/linux/issues/21 # [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") # # Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> # < /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc --version # < /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld --version # < git log --format=%s --max-count=1 b86f936658ba1882f799d3b4328cd7e1c5839e43 # < make -s -j 32 ARCH=powerpc O=/kisskb/build/gustavoars_ppc64_book3e_allmodconfig_powerpc-gcc9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux- ppc64_book3e_allmodconfig # < make -s -j 32 ARCH=powerpc O=/kisskb/build/gustavoars_ppc64_book3e_allmodconfig_powerpc-gcc9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux- help # make -s -j 32 ARCH=powerpc O=/kisskb/build/gustavoars_ppc64_book3e_allmodconfig_powerpc-gcc9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux- olddefconfig # make -s -j 32 ARCH=powerpc O=/kisskb/build/gustavoars_ppc64_book3e_allmodconfig_powerpc-gcc9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux- /kisskb/src/arch/powerpc/boot/dts/virtex440-ml510.dts:335.37-439.6: Warning (pci_bridge): /plb@0/plbv46-pci@85e00000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/virtex440-ml510.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/icon.dts:318.26-357.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/icon.dts:359.26-398.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/icon.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/makalu.dts:271.25-310.5: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/makalu.dts:312.25-351.5: Warning (pci_bridge): /plb/pciex@c0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/makalu.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:43.7-68.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:52.9-67.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8541cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/motionpro.dts:84.15-86.4 arch/powerpc/boot/dts/motionpro.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/mgcoge.dts:230.14-234.7: Warning (spi_bus_reg): /soc@f0000000/cpm@119c0/spi@11aa0/ds3106@1: SPI bus unit address format error, expected "0" /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/uc101.dts:100.15-102.4 arch/powerpc/boot/dts/uc101.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/akebono.dts:251.28-289.5: Warning (pci_bridge): /plb/pciex@10100000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/akebono.dts:291.28-329.5: Warning (pci_bridge): /plb/pciex@20100000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/akebono.dts:331.28-369.5: Warning (pci_bridge): /plb/pciex@18100000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/akebono.dts:371.28-409.5: Warning (pci_bridge): /plb/pciex@28100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/a3m071.dts:135.15-137.4 arch/powerpc/boot/dts/a3m071.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8555cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:305.19-326.5 /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:329.19-344.5 arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2d.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/cm5200.dts:70.15-72.4 arch/powerpc/boot/dts/cm5200.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/pdm360ng.dts:172.13-185.5 arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/haleakala.dts:240.25-279.5: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/haleakala.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/bluestone.dts:328.26-368.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/bluestone.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" /kisskb/src/arch/powerpc/boot/dts/katmai.dts:322.26-361.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/katmai.dts:363.26-402.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/katmai.dts:404.26-443.5: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:58.7-84.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:116.7-142.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2i.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2i.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/currituck.dts:125.28-161.5: Warning (pci_bridge): /plb/pciex@10100000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/currituck.dts:163.28-198.5: Warning (pci_bridge): /plb/pciex@30100000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/currituck.dts:200.28-235.5: Warning (pci_bridge): /plb/pciex@38100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:65.7-90.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/xpedite5200_xmon.dts:139.11-142.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:100.7-126.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:100.7-126.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc8610_hpcd.dts:420.3-21: Warning (pci_device_bus_num): /pcie@e000a000/pcie@0:bus-range: PCI bus number 0 out of range, expected (1 - 1) /kisskb/src/arch/powerpc/boot/dts/canyonlands.dts:464.26-504.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/canyonlands.dts:506.26-546.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/canyonlands.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2mnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2mnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/glacier.dts:492.26-532.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/glacier.dts:534.26-574.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/glacier.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:329.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2dnt2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o3dnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2dnt2.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o3dnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/redwood.dts:238.26-277.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/redwood.dts:279.26-318.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/redwood.dts:320.26-359.5: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/kilauea.dts:325.25-364.5: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/kilauea.dts:366.25-405.5: Warning (pci_bridge): /plb/pciex@c0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/kilauea.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d300.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2d300.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/xpedite5200.dts:135.11-138.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" In file included from /kisskb/src/include/linux/byteorder/big_endian.h:5, from /kisskb/src/arch/powerpc/include/uapi/asm/byteorder.h:14, from /kisskb/src/include/asm-generic/bitops/le.h:6, from /kisskb/src/arch/powerpc/include/asm/bitops.h:250, from /kisskb/src/include/linux/bitops.h:29, from /kisskb/src/include/linux/kernel.h:12, from /kisskb/src/include/asm-generic/bug.h:19, from /kisskb/src/arch/powerpc/include/asm/bug.h:109, from /kisskb/src/include/linux/bug.h:5, from /kisskb/src/include/linux/mmdebug.h:5, from /kisskb/src/include/linux/gfp.h:5, from /kisskb/src/include/linux/slab.h:15, from /kisskb/src/drivers/tty/ehv_bytechan.c:24: /kisskb/src/drivers/tty/ehv_bytechan.c: In function 'ehv_bc_udbg_putc': /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of 'const char[1]' [-Warray-bounds] 298 \| r6 = be32_to_cpu(p[1]); /kisskb/src/include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro '__be32_to_cpu' 40 \| #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) \| ^ /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro 'be32_to_cpu' 298 \| r6 = be32_to_cpu(p[1]); \| ^~~~~~~~~~~ /kisskb/src/drivers/tty/ehv_bytechan.c:166:13: note: while referencing 'data' 166 \| static void ehv_bc_udbg_putc(char c) \| ^~~~~~~~~~~~~~~~ In file included from /kisskb/src/include/linux/byteorder/big_endian.h:5, from /kisskb/src/arch/powerpc/include/uapi/asm/byteorder.h:14, from /kisskb/src/include/asm-generic/bitops/le.h:6, from /kisskb/src/arch/powerpc/include/asm/bitops.h:250, from /kisskb/src/include/linux/bitops.h:29, from /kisskb/src/include/linux/kernel.h:12, from /kisskb/src/include/asm-generic/bug.h:19, from /kisskb/src/arch/powerpc/include/asm/bug.h:109, from /kisskb/src/include/linux/bug.h:5, from /kisskb/src/include/linux/mmdebug.h:5, from /kisskb/src/include/linux/gfp.h:5, from /kisskb/src/include/linux/slab.h:15, from /kisskb/src/drivers/tty/ehv_bytechan.c:24: /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:299:20: warning: array subscript 2 is outside array bounds of 'const char[1]' [-Warray-bounds] 299 \| r7 = be32_to_cpu(p[2]); /kisskb/src/include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro '__be32_to_cpu' 40 \| #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) \| ^ /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:299:7: note: in expansion of macro 'be32_to_cpu' 299 \| r7 = be32_to_cpu(p[2]); \| ^~~~~~~~~~~ /kisskb/src/drivers/tty/ehv_bytechan.c:166:13: note: while referencing 'data' 166 \| static void ehv_bc_udbg_putc(char c) \| ^~~~~~~~~~~~~~~~ In file included from /kisskb/src/include/linux/byteorder/big_endian.h:5, from /kisskb/src/arch/powerpc/include/uapi/asm/byteorder.h:14, from /kisskb/src/include/asm-generic/bitops/le.h:6, from /kisskb/src/arch/powerpc/include/asm/bitops.h:250, from /kisskb/src/include/linux/bitops.h:29, from /kisskb/src/include/linux/kernel.h:12, from /kisskb/src/include/asm-generic/bug.h:19, from /kisskb/src/arch/powerpc/include/asm/bug.h:109, from /kisskb/src/include/linux/bug.h:5, from /kisskb/src/include/linux/mmdebug.h:5, from /kisskb/src/include/linux/gfp.h:5, from /kisskb/src/include/linux/slab.h:15, from /kisskb/src/drivers/tty/ehv_bytechan.c:24: /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:300:20: warning: array subscript 3 is outside array bounds of 'const char[1]' [-Warray-bounds] 300 \| r8 = be32_to_cpu(p[3]); /kisskb/src/include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro '__be32_to_cpu' 40 \| #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) \| ^ /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:300:7: note: in expansion of macro 'be32_to_cpu' 300 \| r8 = be32_to_cpu(p[3]); \| ^~~~~~~~~~~ /kisskb/src/drivers/tty/ehv_bytechan.c:166:13: note: while referencing 'data' 166 \| static void ehv_bc_udbg_putc(char c) \| ^~~~~~~~~~~~~~~~ In file included from /kisskb/src/include/linux/byteorder/big_endian.h:5, from /kisskb/src/arch/powerpc/include/uapi/asm/byteorder.h:14, from /kisskb/src/include/asm-generic/bitops/le.h:6, from /kisskb/src/arch/powerpc/include/asm/bitops.h:250, from /kisskb/src/include/linux/bitops.h:29, from /kisskb/src/include/linux/kernel.h:12, from /kisskb/src/include/asm-generic/bug.h:19, from /kisskb/src/arch/powerpc/include/asm/bug.h:109, from /kisskb/src/include/linux/bug.h:5, from /kisskb/src/include/linux/mmdebug.h:5, from /kisskb/src/include/linux/gfp.h:5, from /kisskb/src/include/linux/slab.h:15, from /kisskb/src/drivers/tty/ehv_bytechan.c:24: /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of 'const char[1]' [-Warray-bounds] 298 \| r6 = be32_to_cpu(p[1]); /kisskb/src/include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro '__be32_to_cpu' 40 \| #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) \| ^ /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro 'be32_to_cpu' 298 \| r6 = be32_to_cpu(p[1]); \| ^~~~~~~~~~~ /kisskb/src/drivers/tty/ehv_bytechan.c:166:13: note: while referencing 'data' 166 \| static void ehv_bc_udbg_putc(char c) \| ^~~~~~~~~~~~~~~~ In file included from /kisskb/src/include/linux/byteorder/big_endian.h:5, from /kisskb/src/arch/powerpc/include/uapi/asm/byteorder.h:14, from /kisskb/src/include/asm-generic/bitops/le.h:6, from /kisskb/src/arch/powerpc/include/asm/bitops.h:250, from /kisskb/src/include/linux/bitops.h:29, from /kisskb/src/include/linux/kernel.h:12, from /kisskb/src/include/asm-generic/bug.h:19, from /kisskb/src/arch/powerpc/include/asm/bug.h:109, from /kisskb/src/include/linux/bug.h:5, from /kisskb/src/include/linux/mmdebug.h:5, from /kisskb/src/include/linux/gfp.h:5, from /kisskb/src/include/linux/slab.h:15, from /kisskb/src/drivers/tty/ehv_bytechan.c:24: /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:299:20: warning: array subscript 2 is outside array bounds of 'const char[1]' [-Warray-bounds] 299 \| r7 = be32_to_cpu(p[2]); /kisskb/src/include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro '__be32_to_cpu' 40 \| #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) \| ^ /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:299:7: note: in expansion of macro 'be32_to_cpu' 299 \| r7 = be32_to_cpu(p[2]); \| ^~~~~~~~~~~ /kisskb/src/drivers/tty/ehv_bytechan.c:166:13: note: while referencing 'data' 166 \| static void ehv_bc_udbg_putc(char c) \| ^~~~~~~~~~~~~~~~ In file included from /kisskb/src/include/linux/byteorder/big_endian.h:5, from /kisskb/src/arch/powerpc/include/uapi/asm/byteorder.h:14, from /kisskb/src/include/asm-generic/bitops/le.h:6, from /kisskb/src/arch/powerpc/include/asm/bitops.h:250, from /kisskb/src/include/linux/bitops.h:29, from /kisskb/src/include/linux/kernel.h:12, from /kisskb/src/include/asm-generic/bug.h:19, from /kisskb/src/arch/powerpc/include/asm/bug.h:109, from /kisskb/src/include/linux/bug.h:5, from /kisskb/src/include/linux/mmdebug.h:5, from /kisskb/src/include/linux/gfp.h:5, from /kisskb/src/include/linux/slab.h:15, from /kisskb/src/drivers/tty/ehv_bytechan.c:24: /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:300:20: warning: array subscript 3 is outside array bounds of 'const char[1]' [-Warray-bounds] 300 \| r8 = be32_to_cpu(p[3]); /kisskb/src/include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro '__be32_to_cpu' 40 \| #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) \| ^ /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:300:7: note: in expansion of macro 'be32_to_cpu' 300 \| r8 = be32_to_cpu(p[3]); \| ^~~~~~~~~~~ /kisskb/src/drivers/tty/ehv_bytechan.c:166:13: note: while referencing 'data' 166 \| static void ehv_bc_udbg_putc(char c) \| ^~~~~~~~~~~~~~~~ /kisskb/src/drivers/usb/host/fhci-hcd.c: In function 'fhci_urb_enqueue': /kisskb/src/drivers/usb/host/fhci-hcd.c:398:8: warning: this statement may fall through [-Wimplicit-fallthrough=] 398 \| size = 2; \| ~~~~~^~~ /kisskb/src/drivers/usb/host/fhci-hcd.c:399:2: note: here 399 \| case PIPE_BULK: \| ^~~~ In file included from /kisskb/src/drivers/net/ethernet/aurora/nb8800.c:30: /kisskb/src/drivers/net/ethernet/aurora/nb8800.h:92: warning: "TCR_DIE" redefined 92 \| #define TCR_DIE BIT(7) \| In file included from /kisskb/src/arch/powerpc/include/asm/reg.h:21, from /kisskb/src/arch/powerpc/include/asm/processor.h:9, from /kisskb/src/arch/powerpc/include/asm/thread_info.h:40, from /kisskb/src/include/linux/thread_info.h:38, from /kisskb/src/include/asm-generic/preempt.h:5, from ./arch/powerpc/include/generated/asm/preempt.h:1, from /kisskb/src/include/linux/preempt.h:78, from /kisskb/src/include/linux/spinlock.h:51, from /kisskb/src/include/linux/seqlock.h:36, from /kisskb/src/include/linux/time.h:6, from /kisskb/src/include/linux/stat.h:19, from /kisskb/src/include/linux/module.h:13, from /kisskb/src/drivers/net/ethernet/aurora/nb8800.c:13: /kisskb/src/arch/powerpc/include/asm/reg_booke.h:551: note: this is the location of the previous definition 551 \| #define TCR_DIE TCR_PIE /* DEC Interrupt Enable / \| /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c: In function 'qe_ep0_rx': /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:836:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 836 \| vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); \| ^ In file included from /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:41: /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:837:28: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 837 \| frame_set_data(pframe, (u8 )vaddr); \| ^ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.h:229:47: note: in definition of macro 'frame_set_data' 229 \| #define frame_set_data(frm, dat) (frm->data = dat) \| ^~~ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c: In function 'ep_rx_tasklet': /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:964:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 964 \| vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); \| ^ In file included from /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:41: /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:965:28: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 965 \| frame_set_data(pframe, (u8 )vaddr); \| ^ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.h:229:47: note: in definition of macro 'frame_set_data' 229 \| #define frame_set_data(frm, dat) (frm->data = dat) \| ^~~ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c: In function 'ep_req_rx': /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:1490:12: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1490 \| vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); \| ^ In file included from /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:41: /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:1491:27: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1491 \| frame_set_data(pframe, (u8 )vaddr); \| ^ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.h:229:47: note: in definition of macro 'frame_set_data' 229 \| #define frame_set_data(frm, dat) (frm->data = dat) \| ^~~ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c: In function 'qe_ep_init': /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:542:37: warning: this statement may fall through [-Wimplicit-fallthrough=] 542 \| if ((max == 128) \|\| (max == 256) \|\| (max == 512)) \| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:544:4: note: here 544 \| default: \| ^~~~~~~ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:563:8: warning: this statement may fall through [-Wimplicit-fallthrough=] 563 \| if (max <= 1024) \| ^ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:565:4: note: here 565 \| case USB_SPEED_FULL: \| ^~~~ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:566:8: warning: this statement may fall through [-Wimplicit-fallthrough=] 566 \| if (max <= 64) \| ^ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:568:4: note: here 568 \| default: \| ^~~~~~~ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:580:8: warning: this statement may fall through [-Wimplicit-fallthrough=] 580 \| if (max <= 1024) \| ^ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:582:4: note: here 582 \| case USB_SPEED_FULL: \| ^~~~ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:596:5: warning: this statement may fall through [-Wimplicit-fallthrough=] 596 \| switch (max) { \| ^~~~~~ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:608:4: note: here 608 \| case USB_SPEED_LOW: \| ^~~~ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c: In function 'qe_ep_set_halt': /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:1840:14: warning: 'udc' may be used uninitialized in this function [-Wmaybe-uninitialized] 1840 \| dev_vdbg(udc->dev, "%s %s halt stat %d\n", ep->ep.name, \| ^~ /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash' /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash' /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash' WARNING: 140 bad relocations c000000000033c0e R_PPC64_ADDR16_HIGHEST .head.text+0x0000000000033c28 c000000000033c12 R_PPC64_ADDR16_HIGH .head.text+0x0000000000033c28 c000000000033c16 R_PPC64_ADDR16_HIGHER .head.text+0x0000000000033c28 c000000000033c1a R_PPC64_ADDR16_LO .head.text+0x0000000000033c28 c000000001a5436b R_PPC64_UADDR64 .rodata+0x000000000054d5d8 c000000001a54386 R_PPC64_UADDR64 .rodata+0x000000000054d620 c000000001a543a1 R_PPC64_UADDR64 .rodata+0x000000000054d630 c000000001a543bc R_PPC64_UADDR64 .rodata+0x000000000054d640 c000000001a543d7 R_PPC64_UADDR64 .rodata+0x000000000054d650 c000000001a543f2 R_PPC64_UADDR64 .rodata+0x000000000054d660 c000000001a5440d R_PPC64_UADDR64 .rodata+0x000000000054d670 c000000001a54443 R_PPC64_UADDR64 .rodata+0x000000000054d690 c000000001a5445e R_PPC64_UADDR64 .rodata+0x000000000054d6a0 c000000001a54479 R_PPC64_UADDR64 .rodata+0x000000000054d6a8 c000000001a54494 R_PPC64_UADDR64 .rodata+0x000000000054d6b0 c000000001a544af R_PPC64_UADDR64 .rodata+0x000000000054d6c0 c000000001a544ca R_PPC64_UADDR64 .rodata+0x000000000054d6d0 c000000001a544e5 R_PPC64_UADDR64 .rodata+0x000000000054d6e0 c000000001a5451b R_PPC64_UADDR64 .rodata+0x000000000054d700 c000000001a54536 R_PPC64_UADDR64 .rodata+0x000000000054d710 c000000001a54551 R_PPC64_UADDR64 .rodata+0x000000000054d720 c000000001a5456c R_PPC64_UADDR64 .rodata+0x000000000054d730 c000000001a54587 R_PPC64_UADDR64 .rodata+0x000000000054d740 c000000001a545a2 R_PPC64_UADDR64 .rodata+0x000000000054d750 c000000001a545bd R_PPC64_UADDR64 .rodata+0x000000000054d760 c000000001a545f3 R_PPC64_UADDR64 .rodata+0x000000000054d780 c000000001a5460e R_PPC64_UADDR64 .rodata+0x000000000054d790 c000000001a54629 R_PPC64_UADDR64 .rodata+0x000000000054d7a0 c000000001a54644 R_PPC64_UADDR64 .rodata+0x000000000054d7b0 c000000001a5465f R_PPC64_UADDR64 .rodata+0x000000000054d7c0 c000000001a5467a R_PPC64_UADDR64 .rodata+0x000000000054d7d0 c000000001a54695 R_PPC64_UADDR64 .rodata+0x000000000054d7e0 c000000001a546cb R_PPC64_UADDR64 .rodata+0x000000000054d7f8 c000000001a546e6 R_PPC64_UADDR64 .rodata+0x000000000054d808 c000000001a54701 R_PPC64_UADDR64 .rodata+0x000000000054d818 c000000001a5471c R_PPC64_UADDR64 .rodata+0x000000000054d828 c000000001a54737 R_PPC64_UADDR64 .rodata+0x000000000054d838 c000000001a54752 R_PPC64_UADDR64 .rodata+0x000000000054d848 c000000001a5476d R_PPC64_UADDR64 .rodata+0x000000000054d858 c000000001a547a3 R_PPC64_UADDR64 .rodata+0x000000000054d878 c000000001a547be R_PPC64_UADDR64 .rodata+0x000000000054d888 c000000001a547d9 R_PPC64_UADDR64 .rodata+0x000000000054d898 c000000001a547f4 R_PPC64_UADDR64 .rodata+0x000000000054d8a8 c000000001a5480f R_PPC64_UADDR64 .rodata+0x000000000054d8b8 c000000001a5482a R_PPC64_UADDR64 .rodata+0x000000000054d8c8 c000000001a54845 R_PPC64_UADDR64 .rodata+0x000000000054d8d8 c000000001a5487b R_PPC64_UADDR64 .rodata+0x000000000054d8f8 c000000001a54896 R_PPC64_UADDR64 .rodata+0x000000000054d908 c000000001a548b1 R_PPC64_UADDR64 .rodata+0x000000000054d918 c000000001a548cc R_PPC64_UADDR64 .rodata+0x000000000054d928 c000000001a548e7 R_PPC64_UADDR64 .rodata+0x000000000054d938 c000000001a54902 R_PPC64_UADDR64 .rodata+0x000000000054d948 c000000001a5491d R_PPC64_UADDR64 .rodata+0x000000000054d958 c000000001a54953 R_PPC64_UADDR64 .rodata+0x000000000054d978 c000000001a5496e R_PPC64_UADDR64 .rodata+0x000000000054d988 c000000001a54989 R_PPC64_UADDR64 .rodata+0x000000000054d998 c000000001a549a4 R_PPC64_UADDR64 .rodata+0x000000000054d9a8 c000000001a549bf R_PPC64_UADDR64 .rodata+0x000000000054d9b8 c000000001a549da R_PPC64_UADDR64 .rodata+0x000000000054d9c8 c000000001a549f5 R_PPC64_UADDR64 .rodata+0x000000000054d9d8 c000000001a54a2b R_PPC64_UADDR64 .rodata+0x000000000054d9f8 c000000001a54a46 R_PPC64_UADDR64 .rodata+0x000000000054da08 c000000001a54a61 R_PPC64_UADDR64 .rodata+0x000000000054da18 c000000001a54a7c R_PPC64_UADDR64 .rodata+0x000000000054da28 c000000001a54a97 R_PPC64_UADDR64 .rodata+0x000000000054da38 c000000001a54ab2 R_PPC64_UADDR64 .rodata+0x000000000054da48 c000000001a54acd R_PPC64_UADDR64 .rodata+0x000000000054da58 c000000001a54b03 R_PPC64_UADDR64 .rodata+0x000000000054da78 c000000001a54b1e R_PPC64_UADDR64 .rodata+0x000000000054da88 c000000001a54b39 R_PPC64_UADDR64 .rodata+0x000000000054da98 c000000001a54b54 R_PPC64_UADDR64 .rodata+0x000000000054daa8 c000000001a54b6f R_PPC64_UADDR64 .rodata+0x000000000054dab8 c000000001a54b8a R_PPC64_UADDR64 .rodata+0x000000000054dac8 c000000001a54ba5 R_PPC64_UADDR64 .rodata+0x000000000054dae0 c000000001a54bdb R_PPC64_UADDR64 .rodata+0x000000000054db00 c000000001a54bf6 R_PPC64_UADDR64 .rodata+0x000000000054db10 c000000001a54c11 R_PPC64_UADDR64 .rodata+0x000000000054db20 c000000001a54c2c R_PPC64_UADDR64 .rodata+0x000000000054db38 c000000001a54c47 R_PPC64_UADDR64 .rodata+0x000000000054db40 c000000001a54c62 R_PPC64_UADDR64 .rodata+0x000000000054db50 c000000001a54c7d R_PPC64_UADDR64 .rodata+0x000000000054db60 c000000001a54cb3 R_PPC64_UADDR64 .rodata+0x000000000054db80 c000000001a54cce R_PPC64_UADDR64 .rodata+0x000000000054db90 c000000001a54ce9 R_PPC64_UADDR64 .rodata+0x000000000054dba0 c000000001a54d04 R_PPC64_UADDR64 .rodata+0x000000000054dbb0 c000000001a54d1f R_PPC64_UADDR64 .rodata+0x000000000054dbc0 c000000001a54d3a R_PPC64_UADDR64 .rodata+0x000000000054dbc8 c000000001a54d55 R_PPC64_UADDR64 .rodata+0x000000000054dbd8 c000000001a54d8b R_PPC64_UADDR64 .rodata+0x000000000054dbf8 c000000001a54da6 R_PPC64_UADDR64 .rodata+0x000000000054dc08 c000000001a54dc1 R_PPC64_UADDR64 .rodata+0x000000000054dc18 c000000001a54ddc R_PPC64_UADDR64 .rodata+0x000000000054dc28 c000000001a54df7 R_PPC64_UADDR64 .rodata+0x000000000054dc38 c000000001a54e12 R_PPC64_UADDR64 .rodata+0x000000000054dc50 c000000001a54e2d R_PPC64_UADDR64 .rodata+0x000000000054dc68 c000000001a54e63 R_PPC64_UADDR64 .rodata+0x000000000054dc88 c000000001a54e7e R_PPC64_UADDR64 .rodata+0x000000000054dc98 c000000001a54e99 R_PPC64_UADDR64 .rodata+0x000000000054dca8 c000000001a54eb4 R_PPC64_UADDR64 .rodata+0x000000000054dcb8 c000000001a54ecf R_PPC64_UADDR64 .rodata+0x000000000054dcc8 c000000001a54eea R_PPC64_UADDR64 .rodata+0x000000000054dcd8 c000000001a54f05 R_PPC64_UADDR64 .rodata+0x000000000054dce8 c000000001a54f3b R_PPC64_UADDR64 .rodata+0x000000000054dd08 c000000001a54f56 R_PPC64_UADDR64 .rodata+0x000000000054dd18 c000000001a54f71 R_PPC64_UADDR64 .rodata+0x000000000054dd28 c000000001a54f8c R_PPC64_UADDR64 .rodata+0x000000000054dd38 c000000001a54fa7 R_PPC64_UADDR64 .rodata+0x000000000054dd48 c000000001a54fc2 R_PPC64_UADDR64 .rodata+0x000000000054dd58 c000000001a54fdd R_PPC64_UADDR64 .rodata+0x000000000054dd68 c000000001a55013 R_PPC64_UADDR64 .rodata+0x000000000054dd88 c000000001a5502e R_PPC64_UADDR64 .rodata+0x000000000054dd98 c000000001a55049 R_PPC64_UADDR64 .rodata+0x000000000054dda8 c000000001a55064 R_PPC64_UADDR64 .rodata+0x000000000054ddb8 c000000001a5507f R_PPC64_UADDR64 .rodata+0x000000000054ddc8 c000000001a5509a R_PPC64_UADDR64 .rodata+0x000000000054ddd8 c000000001a550b5 R_PPC64_UADDR64 .rodata+0x000000000054dde8 c000000001a550eb R_PPC64_UADDR64 .rodata+0x000000000054de08 c000000001a55106 R_PPC64_UADDR64 .rodata+0x000000000054de18 c000000001a55121 R_PPC64_UADDR64 .rodata+0x000000000054de28 c000000001a5513c R_PPC64_UADDR64 .rodata+0x000000000054de38 c000000001a55157 R_PPC64_UADDR64 .rodata+0x000000000054de48 c000000001a55172 R_PPC64_UADDR64 .rodata+0x000000000054de58 c000000001a5518d R_PPC64_UADDR64 .rodata+0x000000000054de68 c000000001a551c3 R_PPC64_UADDR64 .rodata+0x000000000054de88 c000000001a551de R_PPC64_UADDR64 .rodata+0x000000000054de98 c000000001a551f9 R_PPC64_UADDR64 .rodata+0x000000000054dea8 c000000001a55214 R_PPC64_UADDR64 .rodata+0x000000000054deb8 c000000001a5522f R_PPC64_UADDR64 .rodata+0x000000000054dec8 c000000001a5524a R_PPC64_UADDR64 .rodata+0x000000000054ded8 c000000001a55265 R_PPC64_UADDR64 .rodata+0x000000000054dee8 c000000001a5529b R_PPC64_UADDR64 .rodata+0x000000000054df08 c000000001a552b6 R_PPC64_UADDR64 .rodata+0x000000000054df18 c000000001a552d1 R_PPC64_UADDR64 .rodata+0x000000000054df28 c000000001a552ec R_PPC64_UADDR64 .rodata+0x000000000054df40 c000000001a55307 R_PPC64_UADDR64 .rodata+0x000000000054df50 c000000001a55322 R_PPC64_UADDR64 .rodata+0x000000000054df60 c000000001a5533d R_PPC64_UADDR64 .rodata+0x000000000054df70 c000000001a55373 R_PPC64_UADDR64 .rodata+0x000000000054df90 c000000001a5538e R_PPC64_UADDR64 .rodata+0x000000000054dfa0 c000000001a553a9 R_PPC64_UADDR64 .rodata+0x000000000054dfb0 WARNING: You need at least binutils >= 2.19 to build a CONFIG_RELOCATABLE kernel INFO: Uncompressed kernel (size 0x2ab6550) overlaps the address of the wrapper(0x400000) INFO: Fixing the link_address of wrapper to (0x2b00000) Image Name: Linux-5.6.0-rc2+ Created: Tue Feb 25 03:00:34 2020 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 14489667 Bytes = 14150.07 KiB = 13.82 MiB Load Address: 00000000 Entry Point: 00000000 Completed OK # rm -rf /kisskb/build/gustavoars_ppc64_book3e_allmodconfig_powerpc-gcc9 # Build took: 0:21:30.251123

© Michael Ellerman 2006-2018.