Buildresult: linus/powerpc-allmodconfig/powerpc-gcc9 built on Mar 27 2020, 15:43

kisskb

Revisions | Branches | Compilers | Configs | Build Results | Build Failures |

Status:	OK
Date/Time:	Mar 27 2020, 15:43
Duration:	0:23:03.269075
Builder:	blade46
Revision:	afs: Fix unpinned address list during probing (`9efcc4a129363187c9bf15338692f107c5c9b6f0)`
Target:	linus/powerpc-allmodconfig/powerpc-gcc9
Branch:	linus
Compiler:	powerpc-gcc9 (powerpc64-linux-gcc (GCC) 9.2.0 / GNU ld (GNU Binutils) 2.32)
Config:	allmodconfig (download)
Log:	Download original Possible warnings (139) arch/powerpc/boot/dts/virtex440-ml510.dts:335.37-439.6: Warning (pci_bridge): /plb@0/plbv46-pci@85e00000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/virtex440-ml510.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/icon.dts:318.26-357.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/icon.dts:359.26-398.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/icon.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/makalu.dts:271.25-310.5: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/makalu.dts:312.25-351.5: Warning (pci_bridge): /plb/pciex@c0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/makalu.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:52.9-67.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property arch/powerpc/boot/dts/fsl/mpc8541cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/motionpro.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/mgcoge.dts:230.14-234.7: Warning (spi_bus_reg): /soc@f0000000/cpm@119c0/spi@11aa0/ds3106@1: SPI bus unit address format error, expected "0" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/uc101.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/akebono.dts:251.28-289.5: Warning (pci_bridge): /plb/pciex@10100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dts:291.28-329.5: Warning (pci_bridge): /plb/pciex@20100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dts:331.28-369.5: Warning (pci_bridge): /plb/pciex@18100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dts:371.28-409.5: Warning (pci_bridge): /plb/pciex@28100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mpc8555cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/a3m071.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2d.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/cm5200.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/haleakala.dts:240.25-279.5: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/haleakala.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/bluestone.dts:328.26-368.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/bluestone.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" arch/powerpc/boot/dts/katmai.dts:322.26-361.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dts:363.26-402.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dts:404.26-443.5: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2i.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2i.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/currituck.dts:125.28-161.5: Warning (pci_bridge): /plb/pciex@10100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dts:163.28-198.5: Warning (pci_bridge): /plb/pciex@30100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dts:200.28-235.5: Warning (pci_bridge): /plb/pciex@38100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/xpedite5200_xmon.dts:139.11-142.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc8610_hpcd.dts:420.3-21: Warning (pci_device_bus_num): /pcie@e000a000/pcie@0:bus-range: PCI bus number 0 out of range, expected (1 - 1) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/canyonlands.dts:464.26-504.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/canyonlands.dts:506.26-546.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/canyonlands.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2mnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2mnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/glacier.dts:492.26-532.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/glacier.dts:534.26-574.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/glacier.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/stxssa8555.dts:329.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2dnt2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2dnt2.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o3dnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o3dnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/redwood.dts:238.26-277.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dts:279.26-318.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dts:320.26-359.5: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/kilauea.dts:325.25-364.5: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/kilauea.dts:366.25-405.5: Warning (pci_bridge): /plb/pciex@c0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/kilauea.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d300.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2d300.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/xpedite5200.dts:135.11-138.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of 'const char[1]' [-Warray-bounds] arch/powerpc/include/asm/epapr_hcalls.h:299:20: warning: array subscript 2 is outside array bounds of 'const char[1]' [-Warray-bounds] arch/powerpc/include/asm/epapr_hcalls.h:300:20: warning: array subscript 3 is outside array bounds of 'const char[1]' [-Warray-bounds] arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of 'const char[1]' [-Warray-bounds] arch/powerpc/include/asm/epapr_hcalls.h:299:20: warning: array subscript 2 is outside array bounds of 'const char[1]' [-Warray-bounds] arch/powerpc/include/asm/epapr_hcalls.h:300:20: warning: array subscript 3 is outside array bounds of 'const char[1]' [-Warray-bounds] drivers/usb/host/fhci-hcd.c:398:8: warning: this statement may fall through [-Wimplicit-fallthrough=] /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash' /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash' /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash' Full Log # git rev-parse -q --verify 9efcc4a129363187c9bf15338692f107c5c9b6f0^{commit} 9efcc4a129363187c9bf15338692f107c5c9b6f0 already have revision, skipping fetch # git checkout -q -f -B kisskb 9efcc4a129363187c9bf15338692f107c5c9b6f0 # git clean -qxdf # < git log -1 # commit 9efcc4a129363187c9bf15338692f107c5c9b6f0 # Author: David Howells <dhowells@redhat.com> # Date: Thu Mar 26 15:24:07 2020 +0000 # # afs: Fix unpinned address list during probing # # When it's probing all of a fileserver's interfaces to find which one is # best to use, afs_do_probe_fileserver() takes a lock on the server record # and notes the pointer to the address list. # # It doesn't, however, pin the address list, so as soon as it drops the # lock, there's nothing to stop the address list from being freed under # us. # # Fix this by taking a ref on the address list inside the locked section # and dropping it at the end of the function. # # Fixes: 3bf0fb6f33dd ("afs: Probe multiple fileservers simultaneously") # Signed-off-by: David Howells <dhowells@redhat.com> # Reviewed-by: Marc Dionne <marc.dionne@auristor.com> # Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> # < /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc --version # < /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld --version # < git log --format=%s --max-count=1 9efcc4a129363187c9bf15338692f107c5c9b6f0 # < make -s -j 32 ARCH=powerpc O=/kisskb/build/linus_powerpc-allmodconfig_powerpc-gcc9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux- allmodconfig # Added to kconfig CONFIG_BUILD_DOCSRC=n # Added to kconfig CONFIG_MODULE_SIG=n # Added to kconfig CONFIG_SAMPLES=n # Added to kconfig CONFIG_OPTIMIZE_INLINING=n # Added to kconfig # < make -s -j 32 ARCH=powerpc O=/kisskb/build/linus_powerpc-allmodconfig_powerpc-gcc9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux- help # make -s -j 32 ARCH=powerpc O=/kisskb/build/linus_powerpc-allmodconfig_powerpc-gcc9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux- olddefconfig # make -s -j 32 ARCH=powerpc O=/kisskb/build/linus_powerpc-allmodconfig_powerpc-gcc9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux- /kisskb/src/arch/powerpc/boot/dts/virtex440-ml510.dts:335.37-439.6: Warning (pci_bridge): /plb@0/plbv46-pci@85e00000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/virtex440-ml510.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/icon.dts:318.26-357.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/icon.dts:359.26-398.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/icon.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/makalu.dts:271.25-310.5: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/makalu.dts:312.25-351.5: Warning (pci_bridge): /plb/pciex@c0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/makalu.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:43.7-68.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:52.9-67.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8541cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/motionpro.dts:84.15-86.4 arch/powerpc/boot/dts/motionpro.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/mgcoge.dts:230.14-234.7: Warning (spi_bus_reg): /soc@f0000000/cpm@119c0/spi@11aa0/ds3106@1: SPI bus unit address format error, expected "0" /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/uc101.dts:100.15-102.4 arch/powerpc/boot/dts/uc101.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/akebono.dts:251.28-289.5: Warning (pci_bridge): /plb/pciex@10100000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/akebono.dts:291.28-329.5: Warning (pci_bridge): /plb/pciex@20100000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/akebono.dts:331.28-369.5: Warning (pci_bridge): /plb/pciex@18100000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/akebono.dts:371.28-409.5: Warning (pci_bridge): /plb/pciex@28100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/akebono.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8555cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/a3m071.dts:135.15-137.4 arch/powerpc/boot/dts/a3m071.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:305.19-326.5 /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:329.19-344.5 arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2d.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/cm5200.dts:70.15-72.4 arch/powerpc/boot/dts/cm5200.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/pdm360ng.dts:172.13-185.5 arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/haleakala.dts:240.25-279.5: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/haleakala.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/bluestone.dts:328.26-368.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/bluestone.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" /kisskb/src/arch/powerpc/boot/dts/katmai.dts:322.26-361.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/katmai.dts:363.26-402.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/katmai.dts:404.26-443.5: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/katmai.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2i.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2i.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/currituck.dts:125.28-161.5: Warning (pci_bridge): /plb/pciex@10100000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/currituck.dts:163.28-198.5: Warning (pci_bridge): /plb/pciex@30100000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/currituck.dts:200.28-235.5: Warning (pci_bridge): /plb/pciex@38100000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/currituck.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:58.7-84.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:116.7-142.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/xpedite5200_xmon.dts:139.11-142.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:65.7-90.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:100.7-126.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc8610_hpcd.dts:420.3-21: Warning (pci_device_bus_num): /pcie@e000a000/pcie@0:bus-range: PCI bus number 0 out of range, expected (1 - 1) /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:100.7-126.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/canyonlands.dts:464.26-504.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/canyonlands.dts:506.26-546.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/canyonlands.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2mnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2mnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/glacier.dts:492.26-532.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/glacier.dts:534.26-574.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/glacier.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:329.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2dnt2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2dnt2.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o3dnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o3dnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/redwood.dts:238.26-277.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/redwood.dts:279.26-318.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/redwood.dts:320.26-359.5: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/redwood.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/kilauea.dts:325.25-364.5: Warning (pci_bridge): /plb/pciex@a0000000: node name is not "pci" or "pcie" /kisskb/src/arch/powerpc/boot/dts/kilauea.dts:366.25-405.5: Warning (pci_bridge): /plb/pciex@c0000000: node name is not "pci" or "pcie" arch/powerpc/boot/dts/kilauea.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d300.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2d300.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/xpedite5200.dts:135.11-138.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" In file included from /kisskb/src/include/linux/byteorder/big_endian.h:5, from /kisskb/src/arch/powerpc/include/uapi/asm/byteorder.h:14, from /kisskb/src/include/asm-generic/bitops/le.h:6, from /kisskb/src/arch/powerpc/include/asm/bitops.h:250, from /kisskb/src/include/linux/bitops.h:29, from /kisskb/src/include/linux/kernel.h:12, from /kisskb/src/include/asm-generic/bug.h:19, from /kisskb/src/arch/powerpc/include/asm/bug.h:109, from /kisskb/src/include/linux/bug.h:5, from /kisskb/src/include/linux/mmdebug.h:5, from /kisskb/src/include/linux/gfp.h:5, from /kisskb/src/include/linux/slab.h:15, from /kisskb/src/drivers/tty/ehv_bytechan.c:24: /kisskb/src/drivers/tty/ehv_bytechan.c: In function 'ehv_bc_udbg_putc': /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of 'const char[1]' [-Warray-bounds] 298 \| r6 = be32_to_cpu(p[1]); /kisskb/src/include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro '__be32_to_cpu' 40 \| #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) \| ^ /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro 'be32_to_cpu' 298 \| r6 = be32_to_cpu(p[1]); \| ^~~~~~~~~~~ /kisskb/src/drivers/tty/ehv_bytechan.c:166:13: note: while referencing 'data' 166 \| static void ehv_bc_udbg_putc(char c) \| ^~~~~~~~~~~~~~~~ In file included from /kisskb/src/include/linux/byteorder/big_endian.h:5, from /kisskb/src/arch/powerpc/include/uapi/asm/byteorder.h:14, from /kisskb/src/include/asm-generic/bitops/le.h:6, from /kisskb/src/arch/powerpc/include/asm/bitops.h:250, from /kisskb/src/include/linux/bitops.h:29, from /kisskb/src/include/linux/kernel.h:12, from /kisskb/src/include/asm-generic/bug.h:19, from /kisskb/src/arch/powerpc/include/asm/bug.h:109, from /kisskb/src/include/linux/bug.h:5, from /kisskb/src/include/linux/mmdebug.h:5, from /kisskb/src/include/linux/gfp.h:5, from /kisskb/src/include/linux/slab.h:15, from /kisskb/src/drivers/tty/ehv_bytechan.c:24: /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:299:20: warning: array subscript 2 is outside array bounds of 'const char[1]' [-Warray-bounds] 299 \| r7 = be32_to_cpu(p[2]); /kisskb/src/include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro '__be32_to_cpu' 40 \| #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) \| ^ /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:299:7: note: in expansion of macro 'be32_to_cpu' 299 \| r7 = be32_to_cpu(p[2]); \| ^~~~~~~~~~~ /kisskb/src/drivers/tty/ehv_bytechan.c:166:13: note: while referencing 'data' 166 \| static void ehv_bc_udbg_putc(char c) \| ^~~~~~~~~~~~~~~~ In file included from /kisskb/src/include/linux/byteorder/big_endian.h:5, from /kisskb/src/arch/powerpc/include/uapi/asm/byteorder.h:14, from /kisskb/src/include/asm-generic/bitops/le.h:6, from /kisskb/src/arch/powerpc/include/asm/bitops.h:250, from /kisskb/src/include/linux/bitops.h:29, from /kisskb/src/include/linux/kernel.h:12, from /kisskb/src/include/asm-generic/bug.h:19, from /kisskb/src/arch/powerpc/include/asm/bug.h:109, from /kisskb/src/include/linux/bug.h:5, from /kisskb/src/include/linux/mmdebug.h:5, from /kisskb/src/include/linux/gfp.h:5, from /kisskb/src/include/linux/slab.h:15, from /kisskb/src/drivers/tty/ehv_bytechan.c:24: /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:300:20: warning: array subscript 3 is outside array bounds of 'const char[1]' [-Warray-bounds] 300 \| r8 = be32_to_cpu(p[3]); /kisskb/src/include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro '__be32_to_cpu' 40 \| #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) \| ^ /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:300:7: note: in expansion of macro 'be32_to_cpu' 300 \| r8 = be32_to_cpu(p[3]); \| ^~~~~~~~~~~ /kisskb/src/drivers/tty/ehv_bytechan.c:166:13: note: while referencing 'data' 166 \| static void ehv_bc_udbg_putc(char c) \| ^~~~~~~~~~~~~~~~ In file included from /kisskb/src/include/linux/byteorder/big_endian.h:5, from /kisskb/src/arch/powerpc/include/uapi/asm/byteorder.h:14, from /kisskb/src/include/asm-generic/bitops/le.h:6, from /kisskb/src/arch/powerpc/include/asm/bitops.h:250, from /kisskb/src/include/linux/bitops.h:29, from /kisskb/src/include/linux/kernel.h:12, from /kisskb/src/include/asm-generic/bug.h:19, from /kisskb/src/arch/powerpc/include/asm/bug.h:109, from /kisskb/src/include/linux/bug.h:5, from /kisskb/src/include/linux/mmdebug.h:5, from /kisskb/src/include/linux/gfp.h:5, from /kisskb/src/include/linux/slab.h:15, from /kisskb/src/drivers/tty/ehv_bytechan.c:24: /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of 'const char[1]' [-Warray-bounds] 298 \| r6 = be32_to_cpu(p[1]); /kisskb/src/include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro '__be32_to_cpu' 40 \| #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) \| ^ /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro 'be32_to_cpu' 298 \| r6 = be32_to_cpu(p[1]); \| ^~~~~~~~~~~ /kisskb/src/drivers/tty/ehv_bytechan.c:166:13: note: while referencing 'data' 166 \| static void ehv_bc_udbg_putc(char c) \| ^~~~~~~~~~~~~~~~ In file included from /kisskb/src/include/linux/byteorder/big_endian.h:5, from /kisskb/src/arch/powerpc/include/uapi/asm/byteorder.h:14, from /kisskb/src/include/asm-generic/bitops/le.h:6, from /kisskb/src/arch/powerpc/include/asm/bitops.h:250, from /kisskb/src/include/linux/bitops.h:29, from /kisskb/src/include/linux/kernel.h:12, from /kisskb/src/include/asm-generic/bug.h:19, from /kisskb/src/arch/powerpc/include/asm/bug.h:109, from /kisskb/src/include/linux/bug.h:5, from /kisskb/src/include/linux/mmdebug.h:5, from /kisskb/src/include/linux/gfp.h:5, from /kisskb/src/include/linux/slab.h:15, from /kisskb/src/drivers/tty/ehv_bytechan.c:24: /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:299:20: warning: array subscript 2 is outside array bounds of 'const char[1]' [-Warray-bounds] 299 \| r7 = be32_to_cpu(p[2]); /kisskb/src/include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro '__be32_to_cpu' 40 \| #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) \| ^ /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:299:7: note: in expansion of macro 'be32_to_cpu' 299 \| r7 = be32_to_cpu(p[2]); \| ^~~~~~~~~~~ /kisskb/src/drivers/tty/ehv_bytechan.c:166:13: note: while referencing 'data' 166 \| static void ehv_bc_udbg_putc(char c) \| ^~~~~~~~~~~~~~~~ In file included from /kisskb/src/include/linux/byteorder/big_endian.h:5, from /kisskb/src/arch/powerpc/include/uapi/asm/byteorder.h:14, from /kisskb/src/include/asm-generic/bitops/le.h:6, from /kisskb/src/arch/powerpc/include/asm/bitops.h:250, from /kisskb/src/include/linux/bitops.h:29, from /kisskb/src/include/linux/kernel.h:12, from /kisskb/src/include/asm-generic/bug.h:19, from /kisskb/src/arch/powerpc/include/asm/bug.h:109, from /kisskb/src/include/linux/bug.h:5, from /kisskb/src/include/linux/mmdebug.h:5, from /kisskb/src/include/linux/gfp.h:5, from /kisskb/src/include/linux/slab.h:15, from /kisskb/src/drivers/tty/ehv_bytechan.c:24: /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:300:20: warning: array subscript 3 is outside array bounds of 'const char[1]' [-Warray-bounds] 300 \| r8 = be32_to_cpu(p[3]); /kisskb/src/include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro '__be32_to_cpu' 40 \| #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) \| ^ /kisskb/src/arch/powerpc/include/asm/epapr_hcalls.h:300:7: note: in expansion of macro 'be32_to_cpu' 300 \| r8 = be32_to_cpu(p[3]); \| ^~~~~~~~~~~ /kisskb/src/drivers/tty/ehv_bytechan.c:166:13: note: while referencing 'data' 166 \| static void ehv_bc_udbg_putc(char c) \| ^~~~~~~~~~~~~~~~ /kisskb/src/drivers/usb/host/fhci-hcd.c: In function 'fhci_urb_enqueue': /kisskb/src/drivers/usb/host/fhci-hcd.c:398:8: warning: this statement may fall through [-Wimplicit-fallthrough=] 398 \| size = 2; \| ~~~~~^~~ /kisskb/src/drivers/usb/host/fhci-hcd.c:399:2: note: here 399 \| case PIPE_BULK: \| ^~~~ /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash' /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash' /opt/cross/kisskb/korg/gcc-9.2.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash' Completed OK # rm -rf /kisskb/build/linus_powerpc-allmodconfig_powerpc-gcc9 # Build took: 0:23:03.269075

© Michael Ellerman 2006-2018.