# git rev-parse -q --verify 64cc8701ff3161ff1c257f90375a1a3a8a083d78^{commit} # git fetch -q -n -f git://gitlab.ozlabs.ibm.com/linuxppc/linux.git next-test # git rev-parse -q --verify 64cc8701ff3161ff1c257f90375a1a3a8a083d78^{commit} 64cc8701ff3161ff1c257f90375a1a3a8a083d78 # git checkout -q -f -B kisskb 64cc8701ff3161ff1c257f90375a1a3a8a083d78 # git clean -qxdf # < git log -1 # commit 64cc8701ff3161ff1c257f90375a1a3a8a083d78 # Author: Joel Stanley # Date: Thu Aug 1 14:46:30 2019 +0930 # # powerpc/powernv: Print helpful message when cores guarded # # Often the firmware will guard out cores after a crash. This often # undesirable, and is not immediately noticeable. # # This adds an informative message when a CPU device tree nodes are # marked bad in the device tree. # # Signed-off-by: Joel Stanley # [mpe: Use an eye-catcher that's less likely to get us in trouble] # Signed-off-by: Michael Ellerman # Link: https://lore.kernel.org/r/20190801051630.5804-1-joel@jms.id.au # < /opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc --version # < /opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux-ld --version # < git log --format=%s --max-count=1 64cc8701ff3161ff1c257f90375a1a3a8a083d78 # < make -s -j 8 ARCH=powerpc O=/kisskb/build/powerpc-next_ppc64_book3e_allmodconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- ppc64_book3e_allmodconfig # < make -s -j 8 ARCH=powerpc O=/kisskb/build/powerpc-next_ppc64_book3e_allmodconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- help # make -s -j 8 ARCH=powerpc O=/kisskb/build/powerpc-next_ppc64_book3e_allmodconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- olddefconfig # make -s -j 8 ARCH=powerpc O=/kisskb/build/powerpc-next_ppc64_book3e_allmodconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8555cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:329.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/uc101.dts:100.15-102.4 arch/powerpc/boot/dts/uc101.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/xpedite5200_xmon.dts:139.11-142.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" /kisskb/src/arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/a3m071.dts:135.15-137.4 arch/powerpc/boot/dts/a3m071.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d300.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2d300.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2d.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:58.7-84.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:116.7-142.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:65.7-90.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:100.7-126.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:100.7-126.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/cm5200.dts:70.15-72.4 arch/powerpc/boot/dts/cm5200.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:43.7-68.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:52.9-67.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8541cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2dnt2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2dnt2.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/pdm360ng.dts:172.13-185.5 arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o3dnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o3dnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2i.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2i.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/xpedite5200.dts:135.11-138.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" /kisskb/src/arch/powerpc/boot/dts/mgcoge.dts:230.14-234.7: Warning (spi_bus_reg): /soc@f0000000/cpm@119c0/spi@11aa0/ds3106@1: SPI bus unit address format error, expected "0" /kisskb/src/arch/powerpc/boot/dts/mpc8610_hpcd.dts:420.3-21: Warning (pci_device_bus_num): /pcie@e000a000/pcie@0:bus-range: PCI bus number 0 out of range, expected (1 - 1) /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/motionpro.dts:84.15-86.4 arch/powerpc/boot/dts/motionpro.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2mnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2mnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:305.19-326.5 /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:329.19-344.5 arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/drivers/misc/habanalabs/common/habanalabs_ioctl.c: In function 'cs_counters_info': /kisskb/src/drivers/misc/habanalabs/common/habanalabs_ioctl.c:282:9: warning: missing braces around initializer [-Wmissing-braces] struct hl_info_cs_counters cs_counters = {0}; ^ /kisskb/src/drivers/misc/habanalabs/common/habanalabs_ioctl.c:282:9: warning: (near initialization for 'cs_counters.cs_counters') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/xlnx/zynqmp_dp.c: In function 'zynqmp_dp_update_vs_emph': /kisskb/src/drivers/gpu/drm/xlnx/zynqmp_dp.c:667:9: warning: missing braces around initializer [-Wmissing-braces] union phy_configure_opts opts = { 0 }; ^ /kisskb/src/drivers/gpu/drm/xlnx/zynqmp_dp.c:667:9: warning: (near initialization for 'opts.mipi_dphy') [-Wmissing-braces] /kisskb/src/net/smc/smc_llc.c: In function 'smc_llc_add_link_local': /kisskb/src/net/smc/smc_llc.c:1199:9: warning: missing braces around initializer [-Wmissing-braces] struct smc_llc_msg_add_link add_llc = {0}; ^ /kisskb/src/net/smc/smc_llc.c:1199:9: warning: (near initialization for 'add_llc.hd') [-Wmissing-braces] /kisskb/src/net/smc/smc_llc.c: In function 'smc_llc_srv_delete_link_local': /kisskb/src/net/smc/smc_llc.c:1232:9: warning: missing braces around initializer [-Wmissing-braces] struct smc_llc_msg_del_link del_llc = {0}; ^ /kisskb/src/net/smc/smc_llc.c:1232:9: warning: (near initialization for 'del_llc.hd') [-Wmissing-braces] /kisskb/src/net/smc/smc_llc.c: In function 'smc_llc_send_link_delete_all': /kisskb/src/net/smc/smc_llc.c:1304:9: warning: missing braces around initializer [-Wmissing-braces] struct smc_llc_msg_del_link delllc = {0}; ^ /kisskb/src/net/smc/smc_llc.c:1304:9: warning: (near initialization for 'delllc.hd') [-Wmissing-braces] /kisskb/src/drivers/scsi/ufs/ufshcd-crypto.c: In function 'ufshcd_crypto_keyslot_program': /kisskb/src/drivers/scsi/ufs/ufshcd-crypto.c:62:8: warning: missing braces around initializer [-Wmissing-braces] union ufs_crypto_cfg_entry cfg = { 0 }; ^ /kisskb/src/drivers/scsi/ufs/ufshcd-crypto.c:62:8: warning: (near initialization for 'cfg.reg_val') [-Wmissing-braces] /kisskb/src/drivers/scsi/ufs/ufshcd-crypto.c: In function 'ufshcd_clear_keyslot': /kisskb/src/drivers/scsi/ufs/ufshcd-crypto.c:103:8: warning: missing braces around initializer [-Wmissing-braces] union ufs_crypto_cfg_entry cfg = { 0 }; ^ /kisskb/src/drivers/scsi/ufs/ufshcd-crypto.c:103:8: warning: (near initialization for 'cfg.reg_val') [-Wmissing-braces] In file included from /kisskb/src/drivers/net/ethernet/aurora/nb8800.c:30:0: /kisskb/src/drivers/net/ethernet/aurora/nb8800.h:92:0: warning: "TCR_DIE" redefined #define TCR_DIE BIT(7) ^ In file included from /kisskb/src/arch/powerpc/include/asm/reg.h:22:0, from /kisskb/src/arch/powerpc/include/asm/timex.h:12, from /kisskb/src/include/linux/timex.h:65, from /kisskb/src/include/linux/time32.h:13, from /kisskb/src/include/linux/time.h:73, from /kisskb/src/include/linux/stat.h:19, from /kisskb/src/include/linux/module.h:13, from /kisskb/src/drivers/net/ethernet/aurora/nb8800.c:13: /kisskb/src/arch/powerpc/include/asm/reg_booke.h:551:0: note: this is the location of the previous definition #define TCR_DIE TCR_PIE /* DEC Interrupt Enable */ ^ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c: In function 'qe_ep0_rx': /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:836:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); ^ In file included from /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:41:0: /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:837:28: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] frame_set_data(pframe, (u8 *)vaddr); ^ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.h:229:47: note: in definition of macro 'frame_set_data' #define frame_set_data(frm, dat) (frm->data = dat) ^ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c: In function 'ep_rx_tasklet': /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:964:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); ^ In file included from /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:41:0: /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:965:28: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] frame_set_data(pframe, (u8 *)vaddr); ^ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.h:229:47: note: in definition of macro 'frame_set_data' #define frame_set_data(frm, dat) (frm->data = dat) ^ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c: In function 'ep_req_rx': /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:1490:12: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); ^ In file included from /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:41:0: /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.c:1491:27: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] frame_set_data(pframe, (u8 *)vaddr); ^ /kisskb/src/drivers/usb/gadget/udc/fsl_qe_udc.h:229:47: note: in definition of macro 'frame_set_data' #define frame_set_data(frm, dat) (frm->data = dat) ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: In function 'amdgpu_dm_psr_enable': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9031:9: warning: missing braces around initializer [-Wmissing-braces] struct dc_static_screen_params params = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9031:9: warning: (near initialization for 'params.triggers') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c: In function 'bios_parser_get_i2c_info': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:297:9: warning: missing braces around initializer [-Wmissing-braces] struct atom_i2c_record dummy_record = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:297:9: warning: (near initialization for 'dummy_record.record_header') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c: In function 'dcn_bw_apply_registry_override': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:640:2: error: implicit declaration of function 'enable_kernel_vsx' [-Werror=implicit-function-declaration] DC_FP_START(); ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:676:2: error: implicit declaration of function 'disable_kernel_vsx' [-Werror=implicit-function-declaration] DC_FP_END(); ^ cc1: some warnings being treated as errors make[5]: *** [/kisskb/src/scripts/Makefile.build:283: drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.o] Error 1 make[4]: *** [/kisskb/src/scripts/Makefile.build:500: drivers/gpu/drm/amd/amdgpu] Error 2 make[4]: *** Waiting for unfinished jobs.... /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_aes_cbc_setkey': /kisskb/src/drivers/crypto/sa2ul.c:919:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:919:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_aes_ecb_setkey': /kisskb/src/drivers/crypto/sa2ul.c:939:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:939:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_3des_cbc_setkey': /kisskb/src/drivers/crypto/sa2ul.c:957:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:957:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_3des_ecb_setkey': /kisskb/src/drivers/crypto/sa2ul.c:971:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:971:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_sha1_cra_init': /kisskb/src/drivers/crypto/sa2ul.c:1569:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1569:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_sha256_cra_init': /kisskb/src/drivers/crypto/sa2ul.c:1585:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1585:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_sha512_cra_init': /kisskb/src/drivers/crypto/sa2ul.c:1601:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1601:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_aead_cbc_sha1_setkey': /kisskb/src/drivers/crypto/sa2ul.c:1845:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1845:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_aead_cbc_sha256_setkey': /kisskb/src/drivers/crypto/sa2ul.c:1858:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1858:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] make[3]: *** [/kisskb/src/scripts/Makefile.build:500: drivers/gpu/drm] Error 2 make[2]: *** [/kisskb/src/scripts/Makefile.build:500: drivers/gpu] Error 2 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [/kisskb/src/Makefile:1788: drivers] Error 2 make: *** [Makefile:185: __sub-make] Error 2 Command 'make -s -j 8 ARCH=powerpc O=/kisskb/build/powerpc-next_ppc64_book3e_allmodconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- ' returned non-zero exit status 2 # rm -rf /kisskb/build/powerpc-next_ppc64_book3e_allmodconfig_powerpc-gcc4.9 # Build took: 0:22:46.837720