Buildresult: linus/powerpc-allyesconfig/powerpc-gcc4.9 built on Nov 23 2020, 13:28

kisskb

Revisions | Branches | Compilers | Configs | Build Results | Build Failures |

Status:	Failed
Date/Time:	Nov 23 2020, 13:28
Duration:	0:27:53.874273
Builder:	ka1
Revision:	Linux 5.10-rc5 (`418baf2c28f3473039f2f7377760bd8f6897ae18)`
Target:	linus/powerpc-allyesconfig/powerpc-gcc4.9
Branch:	linus
Compiler:	powerpc-gcc4.9 (powerpc64-linux-gcc (GCC) 4.9.4 / GNU ld (GNU Binutils) 2.29.1.20170915)
Config:	allyesconfig (download)
Log:	Download original Possible errors arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" arch/powerpc/boot/dts/xpedite5200_xmon.dts:139.11-142.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" arch/powerpc/boot/dts/xpedite5200.dts:135.11-138.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" arch/powerpc/boot/dts/mgcoge.dts:230.14-234.7: Warning (spi_bus_reg): /soc@f0000000/cpm@119c0/spi@11aa0/ds3106@1: SPI bus unit address format error, expected "0" /opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: final link failed: Bad value make[1]: * [Makefile:1164: vmlinux] Error 1 make: * [Makefile:185: __sub-make] Error 2 Possible warnings (149) arch/powerpc/boot/dts/fsl/mpc8555cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" arch/powerpc/boot/dts/stxssa8555.dts:329.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/uc101.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/xpedite5200_xmon.dts:139.11-142.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:52.9-67.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property arch/powerpc/boot/dts/fsl/mpc8541cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/a3m071.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d300.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2d300.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2d.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/cm5200.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2dnt2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2dnt2.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o3dnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o3dnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2i.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2i.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/xpedite5200.dts:135.11-138.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" arch/powerpc/boot/dts/mgcoge.dts:230.14-234.7: Warning (spi_bus_reg): /soc@f0000000/cpm@119c0/spi@11aa0/ds3106@1: SPI bus unit address format error, expected "0" arch/powerpc/boot/dts/mpc8610_hpcd.dts:420.3-21: Warning (pci_device_bus_num): /pcie@e000a000/pcie@0:bus-range: PCI bus number 0 out of range, expected (1 - 1) arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/motionpro.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2mnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/o2mnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' fs/btrfs/tree-checker.c:1056:9: warning: missing braces around initializer [-Wmissing-braces] fs/btrfs/tree-checker.c:1056:9: warning: (near initialization for 'ri.inode') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/navi10_ppt.c:2539:2: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/navi10_ppt.c:2539:2: warning: (near initialization for 'nv12_metrics.CurrClock') [-Wmissing-braces] drivers/gpu/drm/xlnx/zynqmp_dp.c:667:9: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/xlnx/zynqmp_dp.c:667:9: warning: (near initialization for 'opts.mipi_dphy') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9089:9: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9089:9: warning: (near initialization for 'params.triggers') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:297:9: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:297:9: warning: (near initialization for 'dummy_record.record_header') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn21/rn_clk_mgr.c:763:9: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn21/rn_clk_mgr.c:763:9: warning: (near initialization for 'clock_table.DcfClocks') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_hw_lock_mgr.c:36:8: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_hw_lock_mgr.c:36:8: warning: (near initialization for 'cmd.lock_hw') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:451:15: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:451:15: warning: (near initialization for 'dcn2_0_nv12_soc.clock_limits') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hwseq.c:1200:9: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hwseq.c:1200:9: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hubp.c:1279:9: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hubp.c:1279:9: warning: (near initialization for 'rq_regs.rq_regs_l') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1795:9: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1795:9: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_hubp.c:258:9: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_hubp.c:258:9: warning: (near initialization for 'rq_regs.rq_regs_l') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2440:11: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2440:11: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2622:11: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2622:11: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:2795:8: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:2795:8: warning: (near initialization for 'dpcd_test_mode.bits') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:2797:8: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:2797:8: warning: (near initialization for 'dpcd_pattern_period[0]') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4126:11: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4126:11: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4170:11: warning: missing braces around initializer [-Wmissing-braces] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4170:11: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] drivers/net/ethernet/chelsio/cxgb4/sge.c:910:9: warning: missing braces around initializer [-Wmissing-braces] drivers/net/ethernet/chelsio/cxgb4/sge.c:910:9: warning: (near initialization for 'buf[0]') [-Wmissing-braces] drivers/net/ethernet/mscc/ocelot_vcap.c:755:11: warning: missing braces around initializer [-Wmissing-braces] drivers/net/ethernet/mscc/ocelot_vcap.c:755:11: warning: (near initialization for 'etype.value') [-Wmissing-braces] drivers/crypto/sa2ul.c:924:9: warning: missing braces around initializer [-Wmissing-braces] drivers/crypto/sa2ul.c:924:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] drivers/crypto/sa2ul.c:944:9: warning: missing braces around initializer [-Wmissing-braces] drivers/crypto/sa2ul.c:944:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] drivers/crypto/sa2ul.c:962:9: warning: missing braces around initializer [-Wmissing-braces] drivers/crypto/sa2ul.c:962:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] drivers/crypto/sa2ul.c:976:9: warning: missing braces around initializer [-Wmissing-braces] drivers/crypto/sa2ul.c:976:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] drivers/crypto/sa2ul.c:1601:9: warning: missing braces around initializer [-Wmissing-braces] drivers/crypto/sa2ul.c:1601:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] drivers/crypto/sa2ul.c:1617:9: warning: missing braces around initializer [-Wmissing-braces] drivers/crypto/sa2ul.c:1617:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] drivers/crypto/sa2ul.c:1633:9: warning: missing braces around initializer [-Wmissing-braces] drivers/crypto/sa2ul.c:1633:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] drivers/crypto/sa2ul.c:1862:9: warning: missing braces around initializer [-Wmissing-braces] drivers/crypto/sa2ul.c:1862:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] drivers/crypto/sa2ul.c:1875:9: warning: missing braces around initializer [-Wmissing-braces] drivers/crypto/sa2ul.c:1875:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] Full Log # git rev-parse -q --verify 418baf2c28f3473039f2f7377760bd8f6897ae18^{commit} 418baf2c28f3473039f2f7377760bd8f6897ae18 already have revision, skipping fetch # git checkout -q -f -B kisskb 418baf2c28f3473039f2f7377760bd8f6897ae18 # git clean -qxdf # < git log -1 # commit 418baf2c28f3473039f2f7377760bd8f6897ae18 # Author: Linus Torvalds <torvalds@linux-foundation.org> # Date: Sun Nov 22 15:36:08 2020 -0800 # # Linux 5.10-rc5 # < /opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc --version # < /opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux-ld --version # < git log --format=%s --max-count=1 418baf2c28f3473039f2f7377760bd8f6897ae18 # < make -s -j 8 ARCH=powerpc O=/kisskb/build/linus_powerpc-allyesconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- allyesconfig # Added to kconfig CONFIG_PROFILE_ALL_BRANCHES=n # Added to kconfig CONFIG_ENABLE_WARN_DEPRECATED=n # Added to kconfig CONFIG_ENABLE_MUST_CHECK=n # Added to kconfig CONFIG_DEBUG_INFO=n # Added to kconfig CONFIG_BUILD_DOCSRC=n # Added to kconfig CONFIG_MODULE_SIG=n # < make -s -j 8 ARCH=powerpc O=/kisskb/build/linus_powerpc-allyesconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- help # make -s -j 8 ARCH=powerpc O=/kisskb/build/linus_powerpc-allyesconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- olddefconfig # make -s -j 8 ARCH=powerpc O=/kisskb/build/linus_powerpc-allyesconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8555cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:329.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:58.7-84.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:116.7-142.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/uc101.dts:100.15-102.4 arch/powerpc/boot/dts/uc101.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:65.7-90.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:100.7-126.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:100.7-126.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/xpedite5200_xmon.dts:139.11-142.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:43.7-68.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:52.9-67.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8541cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/a3m071.dts:135.15-137.4 arch/powerpc/boot/dts/a3m071.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d300.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2d300.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2d.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/cm5200.dts:70.15-72.4 arch/powerpc/boot/dts/cm5200.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2dnt2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2dnt2.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/pdm360ng.dts:172.13-185.5 arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o3dnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o3dnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2i.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2i.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/xpedite5200.dts:135.11-138.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" /kisskb/src/arch/powerpc/boot/dts/mgcoge.dts:230.14-234.7: Warning (spi_bus_reg): /soc@f0000000/cpm@119c0/spi@11aa0/ds3106@1: SPI bus unit address format error, expected "0" /kisskb/src/arch/powerpc/boot/dts/mpc8610_hpcd.dts:420.3-21: Warning (pci_device_bus_num): /pcie@e000a000/pcie@0:bus-range: PCI bus number 0 out of range, expected (1 - 1) /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/motionpro.dts:84.15-86.4 arch/powerpc/boot/dts/motionpro.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2mnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2mnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:305.19-326.5 /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:329.19-344.5 arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/fs/btrfs/tree-checker.c: In function 'check_root_item': /kisskb/src/fs/btrfs/tree-checker.c:1056:9: warning: missing braces around initializer [-Wmissing-braces] struct btrfs_root_item ri = { 0 }; ^ /kisskb/src/fs/btrfs/tree-checker.c:1056:9: warning: (near initialization for 'ri.inode') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/navi10_ppt.c: In function 'navi10_get_gpu_metrics': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/navi10_ppt.c:2539:2: warning: missing braces around initializer [-Wmissing-braces] SmuMetrics_NV12_t nv12_metrics = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/navi10_ppt.c:2539:2: warning: (near initialization for 'nv12_metrics.CurrClock') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/xlnx/zynqmp_dp.c: In function 'zynqmp_dp_update_vs_emph': /kisskb/src/drivers/gpu/drm/xlnx/zynqmp_dp.c:667:9: warning: missing braces around initializer [-Wmissing-braces] union phy_configure_opts opts = { 0 }; ^ /kisskb/src/drivers/gpu/drm/xlnx/zynqmp_dp.c:667:9: warning: (near initialization for 'opts.mipi_dphy') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: In function 'amdgpu_dm_psr_enable': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9089:9: warning: missing braces around initializer [-Wmissing-braces] struct dc_static_screen_params params = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9089:9: warning: (near initialization for 'params.triggers') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c: In function 'bios_parser_get_i2c_info': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:297:9: warning: missing braces around initializer [-Wmissing-braces] struct atom_i2c_record dummy_record = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:297:9: warning: (near initialization for 'dummy_record.record_header') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn21/rn_clk_mgr.c: In function 'rn_clk_mgr_construct': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn21/rn_clk_mgr.c:763:9: warning: missing braces around initializer [-Wmissing-braces] struct dpm_clocks clock_table = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn21/rn_clk_mgr.c:763:9: warning: (near initialization for 'clock_table.DcfClocks') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_hw_lock_mgr.c: In function 'dmub_hw_lock_mgr_cmd': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_hw_lock_mgr.c:36:8: warning: missing braces around initializer [-Wmissing-braces] union dmub_rb_cmd cmd = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_hw_lock_mgr.c:36:8: warning: (near initialization for 'cmd.lock_hw') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:451:15: warning: missing braces around initializer [-Wmissing-braces] static struct _vcs_dpi_soc_bounding_box_st dcn2_0_nv12_soc = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:451:15: warning: (near initialization for 'dcn2_0_nv12_soc.clock_limits') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hwseq.c: In function 'dcn20_pipe_control_lock': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hwseq.c:1200:9: warning: missing braces around initializer [-Wmissing-braces] union dmub_hw_lock_flags hw_locks = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hwseq.c:1200:9: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hubp.c: In function 'hubp2_validate_dml_output': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hubp.c:1279:9: warning: missing braces around initializer [-Wmissing-braces] struct _vcs_dpi_display_rq_regs_st rq_regs = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hubp.c:1279:9: warning: (near initialization for 'rq_regs.rq_regs_l') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c: In function 'dcn10_cursor_lock': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1795:9: warning: missing braces around initializer [-Wmissing-braces] union dmub_hw_lock_flags hw_locks = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1795:9: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_hubp.c: In function 'hubp21_validate_dml_output': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_hubp.c:258:9: warning: missing braces around initializer [-Wmissing-braces] struct _vcs_dpi_display_rq_regs_st rq_regs = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_hubp.c:258:9: warning: (near initialization for 'rq_regs.rq_regs_l') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c: In function 'commit_planes_for_stream': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2440:11: warning: missing braces around initializer [-Wmissing-braces] union dmub_hw_lock_flags hw_locks = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2440:11: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2622:11: warning: missing braces around initializer [-Wmissing-braces] union dmub_hw_lock_flags hw_locks = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2622:11: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c: In function 'dp_test_get_audio_test_data': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:2795:8: warning: missing braces around initializer [-Wmissing-braces] union audio_test_mode dpcd_test_mode = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:2795:8: warning: (near initialization for 'dpcd_test_mode.bits') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:2797:8: warning: missing braces around initializer [-Wmissing-braces] union audio_test_pattern_period dpcd_pattern_period[AUDIO_CHANNELS_COUNT] = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:2797:8: warning: (near initialization for 'dpcd_pattern_period[0]') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c: In function 'dc_link_dp_set_test_pattern': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4126:11: warning: missing braces around initializer [-Wmissing-braces] union dmub_hw_lock_flags hw_locks = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4126:11: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4170:11: warning: missing braces around initializer [-Wmissing-braces] union dmub_hw_lock_flags hw_locks = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4170:11: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] /kisskb/src/drivers/net/ethernet/chelsio/cxgb4/sge.c: In function 'cxgb4_write_partial_sgl': /kisskb/src/drivers/net/ethernet/chelsio/cxgb4/sge.c:910:9: warning: missing braces around initializer [-Wmissing-braces] struct ulptx_sge_pair buf[MAX_SKB_FRAGS / 2 + 1] = {0}, to; ^ /kisskb/src/drivers/net/ethernet/chelsio/cxgb4/sge.c:910:9: warning: (near initialization for 'buf[0]') [-Wmissing-braces] /kisskb/src/drivers/net/ethernet/mscc/ocelot_vcap.c: In function 'is1_entry_set': /kisskb/src/drivers/net/ethernet/mscc/ocelot_vcap.c:755:11: warning: missing braces around initializer [-Wmissing-braces] struct ocelot_vcap_u16 etype = {0}; ^ /kisskb/src/drivers/net/ethernet/mscc/ocelot_vcap.c:755:11: warning: (near initialization for 'etype.value') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_aes_cbc_setkey': /kisskb/src/drivers/crypto/sa2ul.c:924:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:924:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_aes_ecb_setkey': /kisskb/src/drivers/crypto/sa2ul.c:944:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:944:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_3des_cbc_setkey': /kisskb/src/drivers/crypto/sa2ul.c:962:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:962:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_3des_ecb_setkey': /kisskb/src/drivers/crypto/sa2ul.c:976:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:976:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_sha1_cra_init': /kisskb/src/drivers/crypto/sa2ul.c:1601:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1601:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_sha256_cra_init': /kisskb/src/drivers/crypto/sa2ul.c:1617:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1617:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_sha512_cra_init': /kisskb/src/drivers/crypto/sa2ul.c:1633:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1633:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_aead_cbc_sha1_setkey': /kisskb/src/drivers/crypto/sa2ul.c:1862:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1862:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_aead_cbc_sha256_setkey': /kisskb/src/drivers/crypto/sa2ul.c:1875:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1875:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: final link failed: Bad value make[1]: [/kisskb/src/Makefile:1164: vmlinux] Error 1 make: * [Makefile:185: __sub-make] Error 2 Command 'make -s -j 8 ARCH=powerpc O=/kisskb/build/linus_powerpc-allyesconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- ' returned non-zero exit status 2 # rm -rf /kisskb/build/linus_powerpc-allyesconfig_powerpc-gcc4.9 # Build took: 0:27:53.874273

© Michael Ellerman 2006-2018.