# git rev-parse -q --verify 03182211c6e6458ef67ee66ed4c71c8ff7791a2d^{commit} 03182211c6e6458ef67ee66ed4c71c8ff7791a2d already have revision, skipping fetch # git checkout -q -f -B kisskb 03182211c6e6458ef67ee66ed4c71c8ff7791a2d # git clean -qxdf # < git log -1 # commit 03182211c6e6458ef67ee66ed4c71c8ff7791a2d # Author: Nicholas Piggin # Date: Wed Jul 21 00:15:04 2021 +1000 # # powerpc/64s/perf: Always use SIAR for kernel interrupts # # If an interrupt is taken in kernel mode, always use SIAR for it rather than # looking at regs_sipr. This prevents samples piling up around interrupt # enable (hard enable or interrupt replay via soft enable) in PMUs / modes # where the PR sample indication is not in synch with SIAR. # # This results in better sampling of interrupt entry and exit in particular. # # Signed-off-by: Nicholas Piggin # Tested-by: Athira Rajeev # Signed-off-by: Michael Ellerman # Link: https://lore.kernel.org/r/20210720141504.420110-1-npiggin@gmail.com # < /opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc --version # < /opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux-ld --version # < git log --format=%s --max-count=1 03182211c6e6458ef67ee66ed4c71c8ff7791a2d # < make -s -j 120 ARCH=powerpc O=/kisskb/build/powerpc-next_ppc32_allmodconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- ppc32_allmodconfig # < make -s -j 120 ARCH=powerpc O=/kisskb/build/powerpc-next_ppc32_allmodconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- help # make -s -j 120 ARCH=powerpc O=/kisskb/build/powerpc-next_ppc32_allmodconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- olddefconfig # make -s -j 120 ARCH=powerpc O=/kisskb/build/powerpc-next_ppc32_allmodconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- /kisskb/src/arch/powerpc/boot/dts/xpedite5200.dts:135.11-138.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" /kisskb/src/arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/motionpro.dts:84.15-86.4 arch/powerpc/boot/dts/motionpro.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mgcoge.dts:230.14-234.7: Warning (spi_bus_reg): /soc@f0000000/cpm@119c0/spi@11aa0/ds3106@1: SPI bus unit address format error, expected "0" /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:43.7-68.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:52.9-67.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/uc101.dts:100.15-102.4 arch/powerpc/boot/dts/uc101.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/a3m071.dts:135.15-137.4 arch/powerpc/boot/dts/a3m071.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2d.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8555cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:305.19-326.5 /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:329.19-344.5 arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/cm5200.dts:70.15-72.4 arch/powerpc/boot/dts/cm5200.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2i.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2i.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:329.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/mpc8610_hpcd.dts:420.3-21: Warning (pci_device_bus_num): /pcie@e000a000/pcie@0:bus-range: PCI bus number 0 out of range, expected (1 - 1) /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2mnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2mnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2dnt2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2dnt2.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o3dnt.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o3dnt.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/xpedite5200_xmon.dts:139.11-142.6: Warning (i2c_bus_reg): /soc@ef000000/i2c@3000/dtt@48: I2C bus unit address format error, expected "34" /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:58.7-84.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:116.7-142.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:100.7-126.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:100.7-126.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:109.9-125.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-280.4: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/o2d300.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:182.18-186.5: Warning (spi_bus_bridge): /soc5200@f0000000/psc@2000: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/o2d.dtsi:32.12-43.5 arch/powerpc/boot/dts/o2d300.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:65.7-90.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8541cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/pdm360ng.dts:172.13-185.5 arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/net/sched/sch_frag.c: In function 'sch_fragment': /kisskb/src/net/sched/sch_frag.c:93:10: warning: missing braces around initializer [-Wmissing-braces] struct rtable sch_frag_rt = { 0 }; ^ /kisskb/src/net/sched/sch_frag.c:93:10: warning: (near initialization for 'sch_frag_rt.dst') [-Wmissing-braces] /kisskb/src/security/landlock/ruleset.c: In function 'insert_rule': /kisskb/src/security/landlock/ruleset.c:196:34: warning: passing argument 2 of 'create_rule' from incompatible pointer type new_rule = create_rule(object, &this->layers, this->num_layers, ^ /kisskb/src/security/landlock/ruleset.c:69:30: note: expected 'const struct landlock_layer (* const)[]' but argument is of type 'struct landlock_layer (*)[]' static struct landlock_rule *create_rule( ^ /kisskb/src/security/landlock/ruleset.c: In function 'landlock_insert_rule': /kisskb/src/security/landlock/ruleset.c:240:38: warning: passing argument 3 of 'insert_rule' from incompatible pointer type return insert_rule(ruleset, object, &layers, ARRAY_SIZE(layers)); ^ /kisskb/src/security/landlock/ruleset.c:144:12: note: expected 'const struct landlock_layer (* const)[]' but argument is of type 'struct landlock_layer (*)[1]' static int insert_rule(struct landlock_ruleset *const ruleset, ^ /kisskb/src/security/landlock/ruleset.c: In function 'merge_ruleset': /kisskb/src/security/landlock/ruleset.c:300:47: warning: passing argument 3 of 'insert_rule' from incompatible pointer type err = insert_rule(dst, walker_rule->object, &layers, ^ /kisskb/src/security/landlock/ruleset.c:144:12: note: expected 'const struct landlock_layer (* const)[]' but argument is of type 'struct landlock_layer (*)[1]' static int insert_rule(struct landlock_ruleset *const ruleset, ^ /kisskb/src/security/landlock/ruleset.c: In function 'inherit_ruleset': /kisskb/src/security/landlock/ruleset.c:330:5: warning: passing argument 3 of 'insert_rule' from incompatible pointer type &walker_rule->layers, walker_rule->num_layers); ^ /kisskb/src/security/landlock/ruleset.c:144:12: note: expected 'const struct landlock_layer (* const)[]' but argument is of type 'struct landlock_layer (*)[]' static int insert_rule(struct landlock_ruleset *const ruleset, ^ /kisskb/src/kernel/trace/trace_osnoise.c: In function 'start_kthread': /kisskb/src/kernel/trace/trace_osnoise.c:1461:8: warning: 'main' is usually a function [-Wmain] void *main = osnoise_main; ^ /kisskb/src/drivers/virtio/virtio_vdpa.c: In function 'virtio_vdpa_setup_vq': /kisskb/src/drivers/virtio/virtio_vdpa.c:146:9: warning: missing braces around initializer [-Wmissing-braces] struct vdpa_vq_state state = {0}; ^ /kisskb/src/drivers/virtio/virtio_vdpa.c:146:9: warning: (near initialization for 'state.') [-Wmissing-braces] /kisskb/src/fs/cifs/connect.c: In function 'cifs_mount': /kisskb/src/fs/cifs/connect.c:3466:2: warning: missing braces around initializer [-Wmissing-braces] uuid_t mount_id = {0}; ^ /kisskb/src/fs/cifs/connect.c:3466:2: warning: (near initialization for 'mount_id.b') [-Wmissing-braces] /kisskb/src/drivers/soc/qcom/pdr_interface.c: In function 'pdr_restart_pd': /kisskb/src/drivers/soc/qcom/pdr_interface.c:572:9: warning: missing braces around initializer [-Wmissing-braces] struct servreg_restart_pd_req req = { 0 }; ^ /kisskb/src/drivers/soc/qcom/pdr_interface.c:572:9: warning: (near initialization for 'req.service_path') [-Wmissing-braces] /kisskb/src/drivers/tty/serial/cpm_uart/cpm_uart_core.c:1095:13: warning: 'udbg_cpm_putc' defined but not used [-Wunused-function] static void udbg_cpm_putc(char c) ^ /kisskb/src/drivers/tty/serial/cpm_uart/cpm_uart_core.c:1109:12: warning: 'udbg_cpm_getc' defined but not used [-Wunused-function] static int udbg_cpm_getc(void) ^ /kisskb/src/drivers/clk/xilinx/xlnx_vcu.c: In function 'xvcu_register_clock_provider': /kisskb/src/drivers/clk/xilinx/xlnx_vcu.c:524:9: warning: missing braces around initializer [-Wmissing-braces] struct clk_parent_data parent_data[2] = { 0 }; ^ /kisskb/src/drivers/clk/xilinx/xlnx_vcu.c:524:9: warning: (near initialization for 'parent_data[0]') [-Wmissing-braces] /kisskb/src/net/openvswitch/actions.c: In function 'ovs_fragment': /kisskb/src/net/openvswitch/actions.c:831:10: warning: missing braces around initializer [-Wmissing-braces] struct rtable ovs_rt = { 0 }; ^ /kisskb/src/net/openvswitch/actions.c:831:10: warning: (near initialization for 'ovs_rt.dst') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/xlnx/zynqmp_dp.c: In function 'zynqmp_dp_update_vs_emph': /kisskb/src/drivers/gpu/drm/xlnx/zynqmp_dp.c:667:9: warning: missing braces around initializer [-Wmissing-braces] union phy_configure_opts opts = { 0 }; ^ /kisskb/src/drivers/gpu/drm/xlnx/zynqmp_dp.c:667:9: warning: (near initialization for 'opts.mipi_dphy') [-Wmissing-braces] /kisskb/src/fs/btrfs/tree-checker.c: In function 'check_root_item': /kisskb/src/fs/btrfs/tree-checker.c:1071:9: warning: missing braces around initializer [-Wmissing-braces] struct btrfs_root_item ri = { 0 }; ^ /kisskb/src/fs/btrfs/tree-checker.c:1071:9: warning: (near initialization for 'ri.inode') [-Wmissing-braces] /kisskb/src/drivers/net/dsa/sja1105/sja1105_spi.c: In function 'sja1105_xfer': /kisskb/src/drivers/net/dsa/sja1105/sja1105_spi.c:40:9: warning: missing braces around initializer [-Wmissing-braces] struct spi_transfer xfers[2] = {0}; ^ /kisskb/src/drivers/net/dsa/sja1105/sja1105_spi.c:40:9: warning: (near initialization for 'xfers[0]') [-Wmissing-braces] /kisskb/src/drivers/net/ethernet/chelsio/cxgb4/sge.c: In function 'cxgb4_write_partial_sgl': /kisskb/src/drivers/net/ethernet/chelsio/cxgb4/sge.c:910:9: warning: missing braces around initializer [-Wmissing-braces] struct ulptx_sge_pair buf[MAX_SKB_FRAGS / 2 + 1] = {0}, *to; ^ /kisskb/src/drivers/net/ethernet/chelsio/cxgb4/sge.c:910:9: warning: (near initialization for 'buf[0]') [-Wmissing-braces] In file included from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.c:62:0: /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.h:2140:0: warning: "writeq_relaxed" redefined #define writeq_relaxed writeq ^ In file included from /kisskb/src/include/linux/io.h:13:0, from /kisskb/src/include/linux/irq.h:20, from /kisskb/src/arch/powerpc/include/asm/hardirq.h:6, from /kisskb/src/include/linux/hardirq.h:11, from /kisskb/src/include/linux/interrupt.h:11, from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.c:20: /kisskb/src/arch/powerpc/include/asm/io.h:675:0: note: this is the location of the previous definition #define writeq_relaxed(v, addr) writeq(v, addr) ^ /kisskb/src/drivers/net/can/usb/etas_es58x/es58x_fd.c: In function 'es58x_fd_enable_channel': /kisskb/src/drivers/net/can/usb/etas_es58x/es58x_fd.c:400:9: warning: missing braces around initializer [-Wmissing-braces] struct es58x_fd_tx_conf_msg tx_conf_msg = { 0 }; ^ /kisskb/src/drivers/net/can/usb/etas_es58x/es58x_fd.c:400:9: warning: (near initialization for 'tx_conf_msg.nominal_bittiming') [-Wmissing-braces] In file included from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:19:0: /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.h:2140:0: warning: "writeq_relaxed" redefined #define writeq_relaxed writeq ^ In file included from /kisskb/src/include/linux/scatterlist.h:9:0, from /kisskb/src/include/linux/dma-mapping.h:10, from /kisskb/src/include/linux/skbuff.h:31, from /kisskb/src/include/linux/if_ether.h:19, from /kisskb/src/include/uapi/linux/ethtool.h:19, from /kisskb/src/include/linux/ethtool.h:18, from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:11: /kisskb/src/arch/powerpc/include/asm/io.h:675:0: note: this is the location of the previous definition #define writeq_relaxed(v, addr) writeq(v, addr) ^ In file included from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:26:0: /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.h:2140:0: warning: "writeq_relaxed" redefined #define writeq_relaxed writeq ^ In file included from /kisskb/src/include/linux/scatterlist.h:9:0, from /kisskb/src/include/linux/dma-mapping.h:10, from /kisskb/src/include/linux/skbuff.h:31, from /kisskb/src/include/linux/if_ether.h:19, from /kisskb/src/include/uapi/linux/ethtool.h:19, from /kisskb/src/include/linux/ethtool.h:18, from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:13: /kisskb/src/arch/powerpc/include/asm/io.h:675:0: note: this is the location of the previous definition #define writeq_relaxed(v, addr) writeq(v, addr) ^ In file included from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c:20:0: /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.h:2140:0: warning: "writeq_relaxed" redefined #define writeq_relaxed writeq ^ In file included from /kisskb/src/include/linux/scatterlist.h:9:0, from /kisskb/src/include/linux/dma-mapping.h:10, from /kisskb/src/include/linux/skbuff.h:31, from /kisskb/src/include/net/net_namespace.h:39, from /kisskb/src/include/linux/netdevice.h:37, from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c:11: /kisskb/src/arch/powerpc/include/asm/io.h:675:0: note: this is the location of the previous definition #define writeq_relaxed(v, addr) writeq(v, addr) ^ /kisskb/src/drivers/net/ethernet/freescale/enetc/enetc_pf.c: In function 'enetc_init_port_rfs_memory': /kisskb/src/drivers/net/ethernet/freescale/enetc/enetc_pf.c:1136:9: warning: missing braces around initializer [-Wmissing-braces] struct enetc_cmd_rfse rfse = {0}; ^ /kisskb/src/drivers/net/ethernet/freescale/enetc/enetc_pf.c:1136:9: warning: (near initialization for 'rfse.smac_h') [-Wmissing-braces] In file included from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c:24:0: /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.h:2140:0: warning: "writeq_relaxed" redefined #define writeq_relaxed writeq ^ In file included from /kisskb/src/include/linux/io.h:13:0, from /kisskb/src/include/linux/irq.h:20, from /kisskb/src/arch/powerpc/include/asm/hardirq.h:6, from /kisskb/src/include/linux/hardirq.h:11, from /kisskb/src/include/linux/interrupt.h:11, from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c:14: /kisskb/src/arch/powerpc/include/asm/io.h:675:0: note: this is the location of the previous definition #define writeq_relaxed(v, addr) writeq(v, addr) ^ In file included from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c:24:0: /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.h:2140:0: warning: "writeq_relaxed" redefined #define writeq_relaxed writeq ^ In file included from /kisskb/src/include/linux/io.h:13:0, from /kisskb/src/include/linux/irq.h:20, from /kisskb/src/arch/powerpc/include/asm/hardirq.h:6, from /kisskb/src/include/linux/hardirq.h:11, from /kisskb/src/include/linux/interrupt.h:11, from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c:14: /kisskb/src/arch/powerpc/include/asm/io.h:675:0: note: this is the location of the previous definition #define writeq_relaxed(v, addr) writeq(v, addr) ^ /kisskb/src/drivers/net/ethernet/freescale/enetc/enetc.c: In function 'enetc_xdp_xmit': /kisskb/src/drivers/net/ethernet/freescale/enetc/enetc.c:1078:9: warning: missing braces around initializer [-Wmissing-braces] struct enetc_tx_swbd xdp_redirect_arr[ENETC_MAX_SKB_FRAGS] = {0}; ^ /kisskb/src/drivers/net/ethernet/freescale/enetc/enetc.c:1078:9: warning: (near initialization for 'xdp_redirect_arr[0]') [-Wmissing-braces] /kisskb/src/drivers/net/ethernet/freescale/enetc/enetc.c: In function 'enetc_clean_rx_ring_xdp': /kisskb/src/drivers/net/ethernet/freescale/enetc/enetc.c:1245:9: warning: missing braces around initializer [-Wmissing-braces] struct enetc_tx_swbd xdp_tx_arr[ENETC_MAX_SKB_FRAGS] = {0}; ^ /kisskb/src/drivers/net/ethernet/freescale/enetc/enetc.c:1245:9: warning: (near initialization for 'xdp_tx_arr[0]') [-Wmissing-braces] In file included from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c:20:0: /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.h:2140:0: warning: "writeq_relaxed" redefined #define writeq_relaxed writeq ^ In file included from /kisskb/src/include/linux/io.h:13:0, from /kisskb/src/include/linux/irq.h:20, from /kisskb/src/arch/powerpc/include/asm/hardirq.h:6, from /kisskb/src/include/linux/hardirq.h:11, from /kisskb/src/include/linux/interrupt.h:11, from /kisskb/src/include/linux/pci.h:38, from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c:11: /kisskb/src/arch/powerpc/include/asm/io.h:675:0: note: this is the location of the previous definition #define writeq_relaxed(v, addr) writeq(v, addr) ^ In file included from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c:17:0: /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.h:2140:0: warning: "writeq_relaxed" redefined #define writeq_relaxed writeq ^ In file included from /kisskb/src/include/linux/io.h:13:0, from /kisskb/src/include/linux/irq.h:20, from /kisskb/src/arch/powerpc/include/asm/hardirq.h:6, from /kisskb/src/include/linux/hardirq.h:11, from /kisskb/src/include/linux/interrupt.h:11, from /kisskb/src/include/linux/pci.h:38, from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c:9: /kisskb/src/arch/powerpc/include/asm/io.h:675:0: note: this is the location of the previous definition #define writeq_relaxed(v, addr) writeq(v, addr) ^ In file included from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:20:0: /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.h:2140:0: warning: "writeq_relaxed" redefined #define writeq_relaxed writeq ^ In file included from /kisskb/src/include/linux/io.h:13:0, from /kisskb/src/include/linux/irq.h:20, from /kisskb/src/arch/powerpc/include/asm/hardirq.h:6, from /kisskb/src/include/linux/hardirq.h:11, from /kisskb/src/include/linux/interrupt.h:11, from /kisskb/src/include/linux/pci.h:38, from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:11: /kisskb/src/arch/powerpc/include/asm/io.h:675:0: note: this is the location of the previous definition #define writeq_relaxed(v, addr) writeq(v, addr) ^ In file included from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c:14:0: /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.h:2140:0: warning: "writeq_relaxed" redefined #define writeq_relaxed writeq ^ In file included from /kisskb/src/include/linux/io.h:13:0, from /kisskb/src/include/linux/irq.h:20, from /kisskb/src/arch/powerpc/include/asm/hardirq.h:6, from /kisskb/src/include/linux/hardirq.h:11, from /kisskb/src/include/linux/interrupt.h:11, from /kisskb/src/include/linux/pci.h:38, from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c:10: /kisskb/src/arch/powerpc/include/asm/io.h:675:0: note: this is the location of the previous definition #define writeq_relaxed(v, addr) writeq(v, addr) ^ In file included from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_dim.c:12:0: /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.h:2140:0: warning: "writeq_relaxed" redefined #define writeq_relaxed writeq ^ In file included from /kisskb/src/include/linux/scatterlist.h:9:0, from /kisskb/src/include/linux/dma-mapping.h:10, from /kisskb/src/include/linux/skbuff.h:31, from /kisskb/src/include/linux/if_ether.h:19, from /kisskb/src/include/uapi/linux/ethtool.h:19, from /kisskb/src/include/linux/ethtool.h:18, from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.h:23, from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_dim.c:12: /kisskb/src/arch/powerpc/include/asm/io.h:675:0: note: this is the location of the previous definition #define writeq_relaxed(v, addr) writeq(v, addr) ^ In file included from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_debugfs.c:15:0: /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.h:2140:0: warning: "writeq_relaxed" redefined #define writeq_relaxed writeq ^ In file included from /kisskb/src/include/linux/io.h:13:0, from /kisskb/src/include/linux/irq.h:20, from /kisskb/src/arch/powerpc/include/asm/hardirq.h:6, from /kisskb/src/include/linux/hardirq.h:11, from /kisskb/src/include/linux/interrupt.h:11, from /kisskb/src/include/linux/pci.h:38, from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_debugfs.c:12: /kisskb/src/arch/powerpc/include/asm/io.h:675:0: note: this is the location of the previous definition #define writeq_relaxed(v, addr) writeq(v, addr) ^ In file included from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c:24:0: /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt.h:2140:0: warning: "writeq_relaxed" redefined #define writeq_relaxed writeq ^ In file included from /kisskb/src/include/linux/scatterlist.h:9:0, from /kisskb/src/include/linux/dma-mapping.h:10, from /kisskb/src/include/linux/skbuff.h:31, from /kisskb/src/include/net/net_namespace.h:39, from /kisskb/src/include/linux/netdevice.h:37, from /kisskb/src/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c:10: /kisskb/src/arch/powerpc/include/asm/io.h:675:0: note: this is the location of the previous definition #define writeq_relaxed(v, addr) writeq(v, addr) ^ /kisskb/src/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c: In function 'dpaa2_switch_port_trap_mac_addr': /kisskb/src/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c:2945:9: warning: missing braces around initializer [-Wmissing-braces] struct dpaa2_switch_acl_entry acl_entry = {0}; ^ /kisskb/src/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c:2945:9: warning: (near initialization for 'acl_entry.list') [-Wmissing-braces] In file included from :0:0: /kisskb/src/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c: In function 'ifh_encode_bitfield': /kisskb/src/include/linux/compiler_types.h:328:38: error: call to '__compiletime_assert_435' declared with attribute error: Unsupported width, must be <= 40 _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ /kisskb/src/include/linux/compiler_types.h:309:4: note: in definition of macro '__compiletime_assert' prefix ## suffix(); \ ^ /kisskb/src/include/linux/compiler_types.h:328:2: note: in expansion of macro '_compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ /kisskb/src/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c:28:2: note: in expansion of macro 'compiletime_assert' compiletime_assert(width <= 40, "Unsupported width, must be <= 40"); ^ make[6]: *** [/kisskb/src/scripts/Makefile.build:271: drivers/net/ethernet/microchip/sparx5/sparx5_netdev.o] Error 1 make[5]: *** [/kisskb/src/scripts/Makefile.build:514: drivers/net/ethernet/microchip/sparx5] Error 2 make[5]: *** Waiting for unfinished jobs.... /kisskb/src/drivers/net/ethernet/marvell/prestera/prestera_flower.c: In function 'prestera_flower_parse_meta': /kisskb/src/drivers/net/ethernet/marvell/prestera/prestera_flower.c:52:9: warning: missing braces around initializer [-Wmissing-braces] struct prestera_acl_rule_match_entry m_entry = {0}; ^ /kisskb/src/drivers/net/ethernet/marvell/prestera/prestera_flower.c:52:9: warning: (near initialization for 'm_entry.list') [-Wmissing-braces] make[4]: *** [/kisskb/src/scripts/Makefile.build:514: drivers/net/ethernet/microchip] Error 2 make[4]: *** Waiting for unfinished jobs.... /kisskb/src/drivers/media/i2c/imx334.c: In function 'imx334_read_reg': /kisskb/src/drivers/media/i2c/imx334.c:288:9: warning: missing braces around initializer [-Wmissing-braces] struct i2c_msg msgs[2] = {0}; ^ /kisskb/src/drivers/media/i2c/imx334.c:288:9: warning: (near initialization for 'msgs[0]') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_aes_cbc_setkey': /kisskb/src/drivers/crypto/sa2ul.c:949:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:949:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_aes_ecb_setkey': /kisskb/src/drivers/crypto/sa2ul.c:969:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:969:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_3des_cbc_setkey': /kisskb/src/drivers/crypto/sa2ul.c:987:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:987:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_3des_ecb_setkey': /kisskb/src/drivers/crypto/sa2ul.c:1001:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1001:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_sha1_cra_init': /kisskb/src/drivers/crypto/sa2ul.c:1628:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1628:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_sha256_cra_init': /kisskb/src/drivers/crypto/sa2ul.c:1644:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1644:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_sha512_cra_init': /kisskb/src/drivers/crypto/sa2ul.c:1660:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1660:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_aead_cbc_sha1_setkey': /kisskb/src/drivers/crypto/sa2ul.c:1886:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1886:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/crypto/sa2ul.c: In function 'sa_aead_cbc_sha256_setkey': /kisskb/src/drivers/crypto/sa2ul.c:1899:9: warning: missing braces around initializer [-Wmissing-braces] struct algo_data ad = { 0 }; ^ /kisskb/src/drivers/crypto/sa2ul.c:1899:9: warning: (near initialization for 'ad.enc_eng') [-Wmissing-braces] /kisskb/src/drivers/cxl/core.c: In function 'cxl_probe_component_regs': /kisskb/src/drivers/cxl/core.c:567:17: warning: missing braces around initializer [-Wmissing-braces] *map = (struct cxl_component_reg_map) { 0 }; ^ /kisskb/src/drivers/cxl/core.c:567:17: warning: (near initialization for '(anonymous).hdm_decoder') [-Wmissing-braces] /kisskb/src/drivers/cxl/core.c: In function 'cxl_probe_device_regs': /kisskb/src/drivers/cxl/core.c:831:17: warning: missing braces around initializer [-Wmissing-braces] *map = (struct cxl_device_reg_map){ 0 }; ^ /kisskb/src/drivers/cxl/core.c:831:17: warning: (near initialization for '(anonymous).status') [-Wmissing-braces] make[3]: *** [/kisskb/src/scripts/Makefile.build:514: drivers/net/ethernet] Error 2 make[2]: *** [/kisskb/src/scripts/Makefile.build:514: drivers/net] Error 2 make[2]: *** Waiting for unfinished jobs.... /kisskb/src/drivers/mtd/nand/raw/mpc5121_nfc.c: In function 'ads5121_select_chip': /kisskb/src/drivers/mtd/nand/raw/mpc5121_nfc.c:294:19: warning: unused variable 'mtd' [-Wunused-variable] struct mtd_info *mtd = nand_to_mtd(nand); ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_psr.c: In function 'amdgpu_dm_psr_enable': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_psr.c:104:9: warning: missing braces around initializer [-Wmissing-braces] struct dc_static_screen_params params = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_psr.c:104:9: warning: (near initialization for 'params.triggers') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c: In function 'bios_parser_get_i2c_info': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:297:9: warning: missing braces around initializer [-Wmissing-braces] struct atom_i2c_record dummy_record = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:297:9: warning: (near initialization for 'dummy_record.record_header') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_hw_lock_mgr.c: In function 'dmub_hw_lock_mgr_inbox0_cmd': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_hw_lock_mgr.c:58:8: warning: missing braces around initializer [-Wmissing-braces] union dmub_inbox0_data_register data = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_hw_lock_mgr.c:58:8: warning: (near initialization for 'data.inbox0_cmd_common') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_srv_stat.c: In function 'dmub_srv_stat_get_notification': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_srv_stat.c:54:8: warning: missing braces around initializer [-Wmissing-braces] union dmub_rb_out_cmd cmd = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_srv_stat.c:54:8: warning: (near initialization for 'cmd.cmd_common') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_dcn20.c: In function 'dmub_dcn20_enable_dmub_boot_options': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_dcn20.c:393:8: warning: missing braces around initializer [-Wmissing-braces] union dmub_fw_boot_options boot_options = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_dcn20.c:393:8: warning: (near initialization for 'boot_options.bits') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c: In function 'commit_planes_for_stream': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2682:11: warning: missing braces around initializer [-Wmissing-braces] union dmub_hw_lock_flags hw_locks = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2682:11: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2868:11: warning: missing braces around initializer [-Wmissing-braces] union dmub_hw_lock_flags hw_locks = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2868:11: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_dcn31.c: In function 'dmub_dcn31_enable_dmub_boot_options': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_dcn31.c:318:8: warning: missing braces around initializer [-Wmissing-braces] union dmub_fw_boot_options boot_options = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_dcn31.c:318:8: warning: (near initialization for 'boot_options.bits') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c: In function 'dc_process_dmub_aux_transfer_async': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3427:8: warning: missing braces around initializer [-Wmissing-braces] union dmub_rb_cmd cmd = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3427:8: warning: (near initialization for 'cmd.lock_hw') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c: In function 'dp_test_get_audio_test_data': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3085:8: warning: missing braces around initializer [-Wmissing-braces] union audio_test_mode dpcd_test_mode = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3085:8: warning: (near initialization for 'dpcd_test_mode.bits') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3087:8: warning: missing braces around initializer [-Wmissing-braces] union audio_test_pattern_period dpcd_pattern_period[AUDIO_CHANNELS_COUNT] = {0}; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3087:8: warning: (near initialization for 'dpcd_pattern_period[0]') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c: In function 'dc_link_dp_set_test_pattern': /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4482:11: warning: missing braces around initializer [-Wmissing-braces] union dmub_hw_lock_flags hw_locks = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4482:11: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4526:11: warning: missing braces around initializer [-Wmissing-braces] union dmub_hw_lock_flags hw_locks = { 0 }; ^ /kisskb/src/drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4526:11: warning: (near initialization for 'hw_locks.bits') [-Wmissing-braces] make[1]: *** [/kisskb/src/Makefile:1842: drivers] Error 2 make: *** [Makefile:220: __sub-make] Error 2 Command 'make -s -j 120 ARCH=powerpc O=/kisskb/build/powerpc-next_ppc32_allmodconfig_powerpc-gcc4.9 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-4.9.4-nolibc/powerpc64-linux/bin/powerpc64-linux- ' returned non-zero exit status 2 # rm -rf /kisskb/build/powerpc-next_ppc32_allmodconfig_powerpc-gcc4.9 # Build took: 0:08:48.749196