# git rev-parse -q --verify 53e99dcff61e1523ec1c3628b2d564ba15d32eb7^{commit} 53e99dcff61e1523ec1c3628b2d564ba15d32eb7 already have revision, skipping fetch # git checkout -q -f -B kisskb 53e99dcff61e1523ec1c3628b2d564ba15d32eb7 # git clean -qxdf # < git log -1 # commit 53e99dcff61e1523ec1c3628b2d564ba15d32eb7 # Merge: 7e18e42e4b28 12f09234bde5 # Author: Linus Torvalds # Date: Mon Sep 5 17:44:48 2022 -0400 # # Merge tag 'soc-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc # # Pull ARM SoC fixes from Arnd Bergmann: # "These are the expected fixes for the SoC tree. I have let the patches # pile up a little too long, so this is bigger than I would have liked. # # - Minor build fixes for Broadcom STB and NXP i.MX8M SoCs as well\ as # TEE firmware # # - Updates to the MAINTAINERS file for the PolarFire SoC # # - Minor DT fixes for Renesas White Hawk and Arm Versatile and Juno # platforms # # - A fix for a missing dependnecy in the NXP DPIO driver # # - Broadcom BCA fixes to the newly added devicetree files # # - Multiple fixes for Microchip AT91 based SoCs, dealing with # self-refresh timings and regulator settings in DT # # - Several DT fixes for NXP i.MX platforms, dealing with incorrect # GPIO settings, extraneous nodes, and a wrong clock setting" # # * tag 'soc-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits) # soc: fsl: select FSL_GUTS driver for DPIO # ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time # ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time # ARM: dts: at91: sama7g5ek: specify proper regulator output ranges # ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges # ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges # ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh # ARM: at91: pm: fix self-refresh for sama7g5 # soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs # ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64B # ARM: ixp4xx: fix typos in comments # arm64: dts: renesas: r8a779g0: Fix HSCIF0 interrupt number # tee: fix compiler warning in tee_shm_register() # arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity # arm64: dts: freescale: verdin-imx8mm: fix atmel_mxt_ts reset polarity # arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM # arm64: dts: imx8mm-venice-gw7901: fix port/phy validation # arm64: dts: verdin-imx8mm: add otg2 pd to usbphy # soc: imx: gpcv2: Assert reset before ungating clock # arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x # ... # < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc --version # < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld --version # < git log --format=%s --max-count=1 53e99dcff61e1523ec1c3628b2d564ba15d32eb7 # < make -s -j 32 ARCH=powerpc O=/kisskb/build/linus_ppc32_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- ppc32_allmodconfig # < make -s -j 32 ARCH=powerpc O=/kisskb/build/linus_ppc32_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- help # make -s -j 32 ARCH=powerpc O=/kisskb/build/linus_ppc32_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- olddefconfig # make -s -j 32 ARCH=powerpc O=/kisskb/build/linus_ppc32_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:65.7-90.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property In file included from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/tm.h:24, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/gcc-plugin.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/plugin.h:23, from /kisskb/src/scripts/gcc-plugins/gcc-common.h:9, from /kisskb/src/scripts/gcc-plugins/latent_entropy_plugin.c:78: /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/config/elfos.h:102:21: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] fprintf ((FILE), "%s"HOST_WIDE_INT_PRINT_UNSIGNED"\n",\ ^ /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/config/elfos.h:170:24: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \ ^ In file included from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/tm.h:27, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/gcc-plugin.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/plugin.h:23, from /kisskb/src/scripts/gcc-plugins/gcc-common.h:9, from /kisskb/src/scripts/gcc-plugins/latent_entropy_plugin.c:78: /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/config/rs6000/sysv4.h:411:24: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \ ^ In file included from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/tm.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/gcc-plugin.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/plugin.h:23, from /kisskb/src/scripts/gcc-plugins/gcc-common.h:9, from /kisskb/src/scripts/gcc-plugins/latent_entropy_plugin.c:78: /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/config/rs6000/option-defaults.h:42:20: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] #define OPT_ARCH64 "!"OPT_32 ^ In file included from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/tm.h:24, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/gcc-plugin.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/plugin.h:23, from /kisskb/src/scripts/gcc-plugins/gcc-common.h:9, from /kisskb/src/scripts/gcc-plugins/structleak_plugin.c:32: /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/config/elfos.h:102:21: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] fprintf ((FILE), "%s"HOST_WIDE_INT_PRINT_UNSIGNED"\n",\ ^ /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/config/elfos.h:170:24: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \ ^ In file included from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/tm.h:27, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/gcc-plugin.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/plugin.h:23, from /kisskb/src/scripts/gcc-plugins/gcc-common.h:9, from /kisskb/src/scripts/gcc-plugins/structleak_plugin.c:32: /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/config/rs6000/sysv4.h:411:24: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \ ^ In file included from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/tm.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/gcc-plugin.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/plugin.h:23, from /kisskb/src/scripts/gcc-plugins/gcc-common.h:9, from /kisskb/src/scripts/gcc-plugins/structleak_plugin.c:32: /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/config/rs6000/option-defaults.h:42:20: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] #define OPT_ARCH64 "!"OPT_32 ^ In file included from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/tm.h:43, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/gcc-plugin.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/plugin.h:23, from /kisskb/src/scripts/gcc-plugins/gcc-common.h:9, from /kisskb/src/scripts/gcc-plugins/latent_entropy_plugin.c:78: /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/defaults.h:126:24: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \ ^ In file included from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/tm.h:24, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/gcc-plugin.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/plugin.h:23, from /kisskb/src/scripts/gcc-plugins/gcc-common.h:9, from /kisskb/src/scripts/gcc-plugins/randomize_layout_plugin.c:19: /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/config/elfos.h:102:21: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] fprintf ((FILE), "%s"HOST_WIDE_INT_PRINT_UNSIGNED"\n",\ ^ /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/config/elfos.h:170:24: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \ ^ In file included from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/tm.h:43, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/gcc-plugin.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/plugin.h:23, from /kisskb/src/scripts/gcc-plugins/gcc-common.h:9, from /kisskb/src/scripts/gcc-plugins/structleak_plugin.c:32: /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/defaults.h:126:24: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \ ^ In file included from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/tm.h:27, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/gcc-plugin.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/plugin.h:23, from /kisskb/src/scripts/gcc-plugins/gcc-common.h:9, from /kisskb/src/scripts/gcc-plugins/randomize_layout_plugin.c:19: /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/config/rs6000/sysv4.h:411:24: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \ ^ In file included from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/tm.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/gcc-plugin.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/plugin.h:23, from /kisskb/src/scripts/gcc-plugins/gcc-common.h:9, from /kisskb/src/scripts/gcc-plugins/randomize_layout_plugin.c:19: /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/config/rs6000/option-defaults.h:42:20: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] #define OPT_ARCH64 "!"OPT_32 ^ /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 In file included from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/tm.h:43, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/gcc-plugin.h:31, from /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/plugin.h:23, from /kisskb/src/scripts/gcc-plugins/gcc-common.h:9, from /kisskb/src/scripts/gcc-plugins/randomize_layout_plugin.c:19: /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/5.5.0/plugin/include/defaults.h:126:24: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \ ^ /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8555cds.dts:341.15-350.5: Warning (pci_device_reg): /pci@e0008000/i8259@19000: PCI unit address format error, expected "12,0" /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8555cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' cc1plus: warning: unrecognized command line option '-Wno-format-diag' cc1plus: warning: unrecognized command line option '-Wno-format-diag' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:305.19-326.5 /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:329.19-344.5 arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' cc1plus: warning: unrecognized command line option '-Wno-format-diag' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:58.7-84.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:116.7-142.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:102.7-129.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:102.7-129.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:43.7-69.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:53.9-68.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8541cds.dts:341.15-350.5: Warning (pci_device_reg): /pci@e0008000/i8259@19000: PCI unit address format error, expected "12,0" /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8541cds.dts:330.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:340.15-349.5: Warning (pci_device_reg): /pci@e0008000/i8259@19000: PCI unit address format error, expected "12,0" /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:329.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/mpc8610_hpcd.dts:420.3-21: Warning (pci_device_bus_num): /pcie@e000a000/pcie@0:bus-range: PCI bus number 0 out of range, expected (1 - 3) /kisskb/src/arch/powerpc/boot/dts/mgcoge.dts:230.14-234.7: Warning (spi_bus_reg): /soc@f0000000/cpm@119c0/spi@11aa0/ds3106@1: SPI bus unit address format error, expected "0" /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/pdm360ng.dts:172.13-185.5 arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' In file included from /kisskb/src/include/ufs/ufshcd.h:24:0, from /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:12: /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_40bit_rmmi': /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:29:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[0].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:29:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:30:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[1].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:30:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:31:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[2].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:31:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:32:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[3].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:32:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:33:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[4].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:33:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:34:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[5].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:34:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:35:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[6].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:35:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:52:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[15].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:52:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:53:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[16].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:53:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:76:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[28].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:76:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_20bit_rmmi_lane0': /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:109:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[8].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:109:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:110:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[9].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:110:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:129:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[19].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:129:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_20bit_rmmi': /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:225:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[0].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:225:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:226:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[1].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:226:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:227:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[2].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:227:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:228:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[3].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:228:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:229:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[4].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:229:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:230:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[5].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:230:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:231:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:241:36: note: (near initialization for 'setup_attrs[6].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:243:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:231:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ make[4]: *** [/kisskb/src/scripts/Makefile.build:249: drivers/ufs/host/tc-dwc-g210.o] Error 1 make[3]: *** [/kisskb/src/scripts/Makefile.build:465: drivers/ufs/host] Error 2 make[2]: *** [/kisskb/src/scripts/Makefile.build:465: drivers/ufs] Error 2 make[2]: *** Waiting for unfinished jobs.... In file included from /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:32:0: /kisskb/src/drivers/media/platform/nxp/imx-pxp.c: In function 'pxp_setup_csc': /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:334:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt601_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:334:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:351:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt601_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:351:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:368:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_rec709_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:368:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:385:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_rec709_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:385:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:402:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt2020_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:402:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:419:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt2020_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:419:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:436:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_smpte240m_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:436:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:453:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_smpte240m_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:453:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ make[5]: *** [/kisskb/src/scripts/Makefile.build:249: drivers/media/platform/nxp/imx-pxp.o] Error 1 make[4]: *** [/kisskb/src/scripts/Makefile.build:465: drivers/media/platform/nxp] Error 2 make[4]: *** Waiting for unfinished jobs.... make[3]: *** [/kisskb/src/scripts/Makefile.build:465: drivers/media/platform] Error 2 make[3]: *** Waiting for unfinished jobs.... make[2]: *** [/kisskb/src/scripts/Makefile.build:465: drivers/media] Error 2 make[1]: *** [/kisskb/src/Makefile:1853: drivers] Error 2 make: *** [Makefile:222: __sub-make] Error 2 Command 'make -s -j 32 ARCH=powerpc O=/kisskb/build/linus_ppc32_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- ' returned non-zero exit status 2 # rm -rf /kisskb/build/linus_ppc32_allmodconfig_powerpc-gcc5 # Build took: 0:13:23.771704