# git rev-parse -q --verify 89ed67ef126c4160349c1b96fdb775ea6170ac90^{commit}
89ed67ef126c4160349c1b96fdb775ea6170ac90
already have revision, skipping fetch
# git checkout -q -f -B kisskb 89ed67ef126c4160349c1b96fdb775ea6170ac90
# git clean -qxdf
# < git log -1
# commit 89ed67ef126c4160349c1b96fdb775ea6170ac90
# Merge: 5a6a09e97199 f1c73396133c
# Author: Linus Torvalds <torvalds@linux-foundation.org>
# Date:   Tue Oct 31 05:10:11 2023 -1000
# 
#     Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
#     
#     Pull networking updates from Jakub Kicinski:
#      "Core & protocols:
#     
#        - Support usec resolution of TCP timestamps, enabled selectively by a
#          route attribute.
#     
#        - Defer regular TCP ACK while processing socket backlog, try to send
#          a cumulative ACK at the end. Increase single TCP flow performance
#          on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
#     
#        - The Fair Queuing (FQ) packet scheduler:
#            - add built-in 3 band prio / WRR scheduling
#            - support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
#            - improve inactive flow reporting
#            - optimize the layout of structures for better cache locality
#     
#        - Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
#          replacement for the old MD5 option.
#     
#        - Add more retransmission timeout (RTO) related statistics to
#          TCP_INFO.
#     
#        - Support sending fragmented skbs over vsock sockets.
#     
#        - Make sure we send SIGPIPE for vsock sockets if socket was
#          shutdown().
#     
#        - Add sysctl for ignoring lower limit on lifetime in Router
#          Advertisement PIO, based on an in-progress IETF draft.
#     
#        - Add sysctl to control activation of TCP ping-pong mode.
#     
#        - Add sysctl to make connection timeout in MPTCP configurable.
#     
#        - Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
#          limit the number of wakeups.
#     
#        - Support netlink GET for MDB (multicast forwarding), allowing user
#          space to request a single MDB entry instead of dumping the entire
#          table.
#     
#        - Support selective FDB flushing in the VXLAN tunnel driver.
#     
#        - Allow limiting learned FDB entries in bridges, prevent OOM attacks.
#     
#        - Allow controlling via configfs netconsole targets which were
#          created via the kernel cmdline at boot, rather than via configfs at
#          runtime.
#     
#        - Support multiple PTP timestamp event queue readers with different
#          filters.
#     
#        - MCTP over I3C.
#     
#       BPF:
#     
#        - Add new veth-like netdevice where BPF program defines the logic of
#          the xmit routine. It can operate in L3 and L2 mode.
#     
#        - Support exceptions - allow asserting conditions which should never
#          be true but are hard for the verifier to infer. With some extra
#          flexibility around handling of the exit / failure:
#     
#               https://lwn.net/Articles/938435/
#     
#        - Add support for local per-cpu kptr, allow allocating and storing
#          per-cpu objects in maps. Access to those objects operates on the
#          value for the current CPU.
#     
#          This allows to deprecate local one-off implementations of per-CPU
#          storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
#     
#        - Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
#          for systemd to re-implement the LogNamespace feature which allows
#          running multiple instances of systemd-journald to process the logs
#          of different services.
#     
#        - Enable open-coded task_vma iteration, after maple tree conversion
#          made it hard to directly walk VMAs in tracing programs.
#     
#        - Add open-coded task, css_task and css iterator support. One of the
#          use cases is customizable OOM victim selection via BPF.
#     
#        - Allow source address selection with bpf_*_fib_lookup().
#     
#        - Add ability to pin BPF timer to the current CPU.
#     
#        - Prevent creation of infinite loops by combining tail calls and
#          fentry/fexit programs.
#     
#        - Add missed stats for kprobes to retrieve the number of missed
#          kprobe executions and subsequent executions of BPF programs.
#     
#        - Inherit system settings for CPU security mitigations.
#     
#        - Add BPF v4 CPU instruction support for arm32 and s390x.
#     
#       Changes to common code:
#     
#        - overflow: add DEFINE_FLEX() for on-stack definition of structs with
#          flexible array members.
#     
#        - Process doc update with more guidance for reviewers.
#     
#       Driver API:
#     
#        - Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
#          mutex in most places and remove a lot of smaller locks.
#     
#        - Create a common DPLL configuration API. Allow configuring and
#          querying state of PLL circuits used for clock syntonization, in
#          network time distribution.
#     
#        - Unify fragmented and full page allocation APIs in page pool code.
#          Let drivers be ignorant of PAGE_SIZE.
#     
#        - Rework PHY state machine to avoid races with calls to phy_stop().
#     
#        - Notify DSA drivers of MAC address changes on user ports, improve
#          correctness of offloads which depend on matching port MAC
#          addresses.
#     
#        - Allow antenna control on injected WiFi frames.
#     
#        - Reduce the number of variants of napi_schedule().
#     
#        - Simplify error handling when composing devlink health messages.
#     
#       Misc:
#     
#        - A lot of KCSAN data race "fixes", from Eric.
#     
#        - A lot of __counted_by() annotations, from Kees.
#     
#        - A lot of strncpy -> strscpy and printf format fixes.
#     
#        - Replace master/slave terminology with conduit/user in DSA drivers.
#     
#        - Handful of KUnit tests for netdev and WiFi core.
#     
#       Removed:
#     
#        - AppleTalk COPS.
#     
#        - AppleTalk ipddp.
#     
#        - TI AR7 CPMAC Ethernet driver.
#     
#       Drivers:
#     
#        - Ethernet high-speed NICs:
#           - Intel (100G, ice, idpf):
#              - add a driver for the Intel E2000 IPUs
#              - make CRC/FCS stripping configurable
#              - cross-timestamping for E823 devices
#              - basic support for E830 devices
#              - use aux-bus for managing client drivers
#              - i40e: report firmware versions via devlink
#           - nVidia/Mellanox:
#              - support 4-port NICs
#              - increase max number of channels to 256
#              - optimize / parallelize SF creation flow
#           - Broadcom (bnxt):
#              - enhance NIC temperature reporting
#              - support PAM4 speeds and lane configuration
#           - Marvell OcteonTX2:
#              - PTP pulse-per-second output support
#              - enable hardware timestamping for VFs
#           - Solarflare/AMD:
#              - conntrack NAT offload and offload for tunnels
#           - Wangxun (ngbe/txgbe):
#              - expose HW statistics
#           - Pensando/AMD:
#              - support PCI level reset
#              - narrow down the condition under which skbs are linearized
#           - Netronome/Corigine (nfp):
#              - support CHACHA20-POLY1305 crypto in IPsec offload
#     
#        - Ethernet NICs embedded, slower, virtual:
#           - Synopsys (stmmac):
#              - add Loongson-1 SoC support
#              - enable use of HW queues with no offload capabilities
#              - enable PPS input support on all 5 channels
#              - increase TX coalesce timer to 5ms
#           - RealTek USB (r8152): improve efficiency of Rx by using GRO frags
#           - xen: support SW packet timestamping
#           - add drivers for implementations based on TI's PRUSS (AM64x EVM)
#     
#        - nVidia/Mellanox Ethernet datacenter switches:
#           - avoid poor HW resource use on Spectrum-4 by better block
#             selection for IPv6 multicast forwarding and ordering of blocks
#             in ACL region
#     
#        - Ethernet embedded switches:
#           - Microchip:
#              - support configuring the drive strength for EMI compliance
#              - ksz9477: partial ACL support
#              - ksz9477: HSR offload
#              - ksz9477: Wake on LAN
#           - Realtek:
#              - rtl8366rb: respect device tree config of the CPU port
#     
#        - Ethernet PHYs:
#           - support Broadcom BCM5221 PHYs
#           - TI dp83867: support hardware LED blinking
#     
#        - CAN:
#           - add support for Linux-PHY based CAN transceivers
#           - at91_can: clean up and use rx-offload helpers
#     
#        - WiFi:
#           - MediaTek (mt76):
#              - new sub-driver for mt7925 USB/PCIe devices
#              - HW wireless <> Ethernet bridging in MT7988 chips
#              - mt7603/mt7628 stability improvements
#           - Qualcomm (ath12k):
#              - WCN7850:
#                 - enable 320 MHz channels in 6 GHz band
#                 - hardware rfkill support
#                 - enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
#                   make scan faster
#                 - read board data variant name from SMBIOS
#             - QCN9274: mesh support
#           - RealTek (rtw89):
#              - TDMA-based multi-channel concurrency (MCC)
#           - Silicon Labs (wfx):
#              - Remain-On-Channel (ROC) support
#     
#        - Bluetooth:
#           - ISO: many improvements for broadcast support
#           - mark BCM4378/BCM4387 as BROKEN_LE_CODED
#           - add support for QCA2066
#           - btmtksdio: enable Bluetooth wakeup from suspend"
#     
#     * tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
#       net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
#       net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
#       net: mana: Use xdp_set_features_flag instead of direct assignment
#       vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
#       iavf: delete the iavf client interface
#       iavf: add a common function for undoing the interrupt scheme
#       iavf: use unregister_netdev
#       iavf: rely on netdev's own registered state
#       iavf: fix the waiting time for initial reset
#       iavf: in iavf_down, don't queue watchdog_task if comms failed
#       iavf: simplify mutex_trylock+sleep loops
#       iavf: fix comments about old bit locks
#       doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
#       tools: ynl: introduce option to process unknown attributes or types
#       ipvlan: properly track tx_errors
#       netdevsim: Block until all devices are released
#       nfp: using napi_build_skb() to replace build_skb()
#       net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
#       net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
#       net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
#       ...
# < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc --version
# < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld --version
# < git log --format=%s --max-count=1 89ed67ef126c4160349c1b96fdb775ea6170ac90
# make -s -j 40 ARCH=powerpc O=/kisskb/build/linus_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-  allmodconfig
# Added to kconfig CONFIG_BUILD_DOCSRC=n
# Added to kconfig CONFIG_SAMPLES=n
# Added to kconfig CONFIG_OPTIMIZE_INLINING=n
# Added to kconfig CONFIG_BPF_PRELOAD=n
# Added to kconfig CONFIG_GCC_PLUGINS=n
# Added to kconfig 
# < make -s -j 40 ARCH=powerpc O=/kisskb/build/linus_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-  help
# make -s -j 40 ARCH=powerpc O=/kisskb/build/linus_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-  olddefconfig
# make -s -j 40 ARCH=powerpc O=/kisskb/build/linus_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-  
/kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi'
  also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:305.19-326.5
/kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi'
  also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:329.19-344.5
arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
/kisskb/src/arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c"
/kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:87.7-113.3
/kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge)
/kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property
/kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:58.7-84.3
/kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge)
/kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:87.7-113.3
/kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge)
/kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:116.7-142.3
/kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1"
/kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2"
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:102.7-129.3
/kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:102.7-129.3
/kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:43.7-69.3
/kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:53.9-68.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3
/kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3
/kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:65.7-90.3
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi'
  also defined at /kisskb/src/arch/powerpc/boot/dts/pdm360ng.dts:172.13-185.5
arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
/kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:342.15-351.5: Warning (pci_device_reg): /pci@e0008000/i8259@19000: PCI unit address format error, expected "12,0"
/kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:331.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0)
In file included from /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:35:0:
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c: In function 'pxp_setup_csc':
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:374:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt601_lim[0]')
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:374:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:391:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt601_full[0]')
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:391:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:408:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_rec709_lim[0]')
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:408:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:425:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_rec709_full[0]')
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:425:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:442:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt2020_lim[0]')
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:442:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:459:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt2020_full[0]')
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:459:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:476:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_smpte240m_lim[0]')
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:476:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:493:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_smpte240m_full[0]')
 #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
                                      ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c:493:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
    BM_PXP_CSC1_COEF0_YCBCR_MODE |
    ^
/kisskb/src/drivers/media/platform/nxp/imx-pxp.c: At top level:
cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror]
cc1: all warnings being treated as errors
make[7]: *** [/kisskb/src/scripts/Makefile.build:243: drivers/media/platform/nxp/imx-pxp.o] Error 1
make[7]: *** Waiting for unfinished jobs....
make[6]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/media/platform/nxp] Error 2
make[6]: *** Waiting for unfinished jobs....
make[5]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/media/platform] Error 2
make[5]: *** Waiting for unfinished jobs....
In file included from /kisskb/src/include/ufs/ufshcd.h:27:0,
                 from /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:12:
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_40bit_rmmi':
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:28:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[0].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:28:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:29:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[1].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:29:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:30:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[2].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:30:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:31:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[3].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:31:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:32:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[4].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:32:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:33:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[5].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:33:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:34:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[6].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:34:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:51:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[15].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:51:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:52:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[16].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:52:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:75:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[28].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:75:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
     ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_20bit_rmmi_lane0':
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:107:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[8].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:107:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:108:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[9].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:108:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:127:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[19].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:127:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
     ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_20bit_rmmi':
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:221:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[0].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:221:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:222:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[1].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:222:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:223:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[2].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:223:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:224:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[3].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:224:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:225:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[4].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:225:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:226:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[5].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:226:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:227:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[6].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:227:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
     ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c: At top level:
cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror]
cc1: all warnings being treated as errors
make[6]: *** [/kisskb/src/scripts/Makefile.build:243: drivers/ufs/host/tc-dwc-g210.o] Error 1
make[5]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/ufs/host] Error 2
make[5]: *** Waiting for unfinished jobs....
make[4]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/ufs] Error 2
make[4]: *** Waiting for unfinished jobs....
make[4]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/media] Error 2
/kisskb/src/fs/bcachefs/mean_and_variance.c: In function 'u128_div':
/kisskb/src/fs/bcachefs/mean_and_variance.c:47:8: note: the ABI of passing aggregates with 16-byte alignment has changed in GCC 5
 u128_u u128_div(u128_u n, u64 d)
        ^
In file included from /kisskb/src/fs/bcachefs/mean_and_variance_test.c:4:0:
/kisskb/src/fs/bcachefs/mean_and_variance.h: In function 'u128_add':
/kisskb/src/fs/bcachefs/mean_and_variance.h:38:22: note: the ABI of passing aggregates with 16-byte alignment has changed in GCC 5
 static inline u128_u u128_add(u128_u a, u128_u b)
                      ^
make[3]: *** [/kisskb/src/scripts/Makefile.build:480: drivers] Error 2
make[2]: *** [/kisskb/src/Makefile:1913: .] Error 2
make[1]: *** [/kisskb/src/Makefile:234: __sub-make] Error 2
make: *** [Makefile:234: __sub-make] Error 2
Command 'make -s -j 40 ARCH=powerpc O=/kisskb/build/linus_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-  ' returned non-zero exit status 2.
# rm -rf /kisskb/build/linus_allmodconfig_powerpc-gcc5
# Build took: 0:07:31.884885