# git rev-parse -q --verify 89ed67ef126c4160349c1b96fdb775ea6170ac90^{commit} 89ed67ef126c4160349c1b96fdb775ea6170ac90 already have revision, skipping fetch # git checkout -q -f -B kisskb 89ed67ef126c4160349c1b96fdb775ea6170ac90 # git clean -qxdf # < git log -1 # commit 89ed67ef126c4160349c1b96fdb775ea6170ac90 # Merge: 5a6a09e97199 f1c73396133c # Author: Linus Torvalds # Date: Tue Oct 31 05:10:11 2023 -1000 # # Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next # # Pull networking updates from Jakub Kicinski: # "Core & protocols: # # - Support usec resolution of TCP timestamps, enabled selectively by a # route attribute. # # - Defer regular TCP ACK while processing socket backlog, try to send # a cumulative ACK at the end. Increase single TCP flow performance # on a 200Gbit NIC by 20% (100Gbit -> 120Gbit). # # - The Fair Queuing (FQ) packet scheduler: # - add built-in 3 band prio / WRR scheduling # - support bypass if the qdisc is mostly idle (5% speed up for TCP RR) # - improve inactive flow reporting # - optimize the layout of structures for better cache locality # # - Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern # replacement for the old MD5 option. # # - Add more retransmission timeout (RTO) related statistics to # TCP_INFO. # # - Support sending fragmented skbs over vsock sockets. # # - Make sure we send SIGPIPE for vsock sockets if socket was # shutdown(). # # - Add sysctl for ignoring lower limit on lifetime in Router # Advertisement PIO, based on an in-progress IETF draft. # # - Add sysctl to control activation of TCP ping-pong mode. # # - Add sysctl to make connection timeout in MPTCP configurable. # # - Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps # limit the number of wakeups. # # - Support netlink GET for MDB (multicast forwarding), allowing user # space to request a single MDB entry instead of dumping the entire # table. # # - Support selective FDB flushing in the VXLAN tunnel driver. # # - Allow limiting learned FDB entries in bridges, prevent OOM attacks. # # - Allow controlling via configfs netconsole targets which were # created via the kernel cmdline at boot, rather than via configfs at # runtime. # # - Support multiple PTP timestamp event queue readers with different # filters. # # - MCTP over I3C. # # BPF: # # - Add new veth-like netdevice where BPF program defines the logic of # the xmit routine. It can operate in L3 and L2 mode. # # - Support exceptions - allow asserting conditions which should never # be true but are hard for the verifier to infer. With some extra # flexibility around handling of the exit / failure: # # https://lwn.net/Articles/938435/ # # - Add support for local per-cpu kptr, allow allocating and storing # per-cpu objects in maps. Access to those objects operates on the # value for the current CPU. # # This allows to deprecate local one-off implementations of per-CPU # storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps. # # - Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is # for systemd to re-implement the LogNamespace feature which allows # running multiple instances of systemd-journald to process the logs # of different services. # # - Enable open-coded task_vma iteration, after maple tree conversion # made it hard to directly walk VMAs in tracing programs. # # - Add open-coded task, css_task and css iterator support. One of the # use cases is customizable OOM victim selection via BPF. # # - Allow source address selection with bpf_*_fib_lookup(). # # - Add ability to pin BPF timer to the current CPU. # # - Prevent creation of infinite loops by combining tail calls and # fentry/fexit programs. # # - Add missed stats for kprobes to retrieve the number of missed # kprobe executions and subsequent executions of BPF programs. # # - Inherit system settings for CPU security mitigations. # # - Add BPF v4 CPU instruction support for arm32 and s390x. # # Changes to common code: # # - overflow: add DEFINE_FLEX() for on-stack definition of structs with # flexible array members. # # - Process doc update with more guidance for reviewers. # # Driver API: # # - Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy # mutex in most places and remove a lot of smaller locks. # # - Create a common DPLL configuration API. Allow configuring and # querying state of PLL circuits used for clock syntonization, in # network time distribution. # # - Unify fragmented and full page allocation APIs in page pool code. # Let drivers be ignorant of PAGE_SIZE. # # - Rework PHY state machine to avoid races with calls to phy_stop(). # # - Notify DSA drivers of MAC address changes on user ports, improve # correctness of offloads which depend on matching port MAC # addresses. # # - Allow antenna control on injected WiFi frames. # # - Reduce the number of variants of napi_schedule(). # # - Simplify error handling when composing devlink health messages. # # Misc: # # - A lot of KCSAN data race "fixes", from Eric. # # - A lot of __counted_by() annotations, from Kees. # # - A lot of strncpy -> strscpy and printf format fixes. # # - Replace master/slave terminology with conduit/user in DSA drivers. # # - Handful of KUnit tests for netdev and WiFi core. # # Removed: # # - AppleTalk COPS. # # - AppleTalk ipddp. # # - TI AR7 CPMAC Ethernet driver. # # Drivers: # # - Ethernet high-speed NICs: # - Intel (100G, ice, idpf): # - add a driver for the Intel E2000 IPUs # - make CRC/FCS stripping configurable # - cross-timestamping for E823 devices # - basic support for E830 devices # - use aux-bus for managing client drivers # - i40e: report firmware versions via devlink # - nVidia/Mellanox: # - support 4-port NICs # - increase max number of channels to 256 # - optimize / parallelize SF creation flow # - Broadcom (bnxt): # - enhance NIC temperature reporting # - support PAM4 speeds and lane configuration # - Marvell OcteonTX2: # - PTP pulse-per-second output support # - enable hardware timestamping for VFs # - Solarflare/AMD: # - conntrack NAT offload and offload for tunnels # - Wangxun (ngbe/txgbe): # - expose HW statistics # - Pensando/AMD: # - support PCI level reset # - narrow down the condition under which skbs are linearized # - Netronome/Corigine (nfp): # - support CHACHA20-POLY1305 crypto in IPsec offload # # - Ethernet NICs embedded, slower, virtual: # - Synopsys (stmmac): # - add Loongson-1 SoC support # - enable use of HW queues with no offload capabilities # - enable PPS input support on all 5 channels # - increase TX coalesce timer to 5ms # - RealTek USB (r8152): improve efficiency of Rx by using GRO frags # - xen: support SW packet timestamping # - add drivers for implementations based on TI's PRUSS (AM64x EVM) # # - nVidia/Mellanox Ethernet datacenter switches: # - avoid poor HW resource use on Spectrum-4 by better block # selection for IPv6 multicast forwarding and ordering of blocks # in ACL region # # - Ethernet embedded switches: # - Microchip: # - support configuring the drive strength for EMI compliance # - ksz9477: partial ACL support # - ksz9477: HSR offload # - ksz9477: Wake on LAN # - Realtek: # - rtl8366rb: respect device tree config of the CPU port # # - Ethernet PHYs: # - support Broadcom BCM5221 PHYs # - TI dp83867: support hardware LED blinking # # - CAN: # - add support for Linux-PHY based CAN transceivers # - at91_can: clean up and use rx-offload helpers # # - WiFi: # - MediaTek (mt76): # - new sub-driver for mt7925 USB/PCIe devices # - HW wireless <> Ethernet bridging in MT7988 chips # - mt7603/mt7628 stability improvements # - Qualcomm (ath12k): # - WCN7850: # - enable 320 MHz channels in 6 GHz band # - hardware rfkill support # - enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to # make scan faster # - read board data variant name from SMBIOS # - QCN9274: mesh support # - RealTek (rtw89): # - TDMA-based multi-channel concurrency (MCC) # - Silicon Labs (wfx): # - Remain-On-Channel (ROC) support # # - Bluetooth: # - ISO: many improvements for broadcast support # - mark BCM4378/BCM4387 as BROKEN_LE_CODED # - add support for QCA2066 # - btmtksdio: enable Bluetooth wakeup from suspend" # # * tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits) # net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers # net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos() # net: mana: Use xdp_set_features_flag instead of direct assignment # vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size() # iavf: delete the iavf client interface # iavf: add a common function for undoing the interrupt scheme # iavf: use unregister_netdev # iavf: rely on netdev's own registered state # iavf: fix the waiting time for initial reset # iavf: in iavf_down, don't queue watchdog_task if comms failed # iavf: simplify mutex_trylock+sleep loops # iavf: fix comments about old bit locks # doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name # tools: ynl: introduce option to process unknown attributes or types # ipvlan: properly track tx_errors # netdevsim: Block until all devices are released # nfp: using napi_build_skb() to replace build_skb() # net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy" # net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN # net: dsa: microchip: Refactor switch shutdown routine for WoL preparation # ... # < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc --version # < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld --version # < git log --format=%s --max-count=1 89ed67ef126c4160349c1b96fdb775ea6170ac90 # make -s -j 24 ARCH=powerpc O=/kisskb/build/linus_allyesconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- allyesconfig # Added to kconfig CONFIG_PROFILE_ALL_BRANCHES=n # Added to kconfig CONFIG_ENABLE_WARN_DEPRECATED=n # Added to kconfig CONFIG_ENABLE_MUST_CHECK=n # Added to kconfig CONFIG_DEBUG_INFO=n # Added to kconfig CONFIG_BUILD_DOCSRC=n # Added to kconfig CONFIG_MODULE_SIG=n # Added to kconfig CONFIG_GCC_PLUGINS=n # Added to kconfig CONFIG_SAMPLES=n # < make -s -j 24 ARCH=powerpc O=/kisskb/build/linus_allyesconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- help # make -s -j 24 ARCH=powerpc O=/kisskb/build/linus_allyesconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- olddefconfig # make -s -j 24 ARCH=powerpc O=/kisskb/build/linus_allyesconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:305.19-326.5 /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:329.19-344.5 arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" /kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:58.7-84.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:116.7-142.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:102.7-129.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:43.7-69.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:53.9-68.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:102.7-129.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:65.7-90.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/pdm360ng.dts:172.13-185.5 arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:342.15-351.5: Warning (pci_device_reg): /pci@e0008000/i8259@19000: PCI unit address format error, expected "12,0" /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:331.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/net/ipv4/tcp_output.c: In function 'tcp_options_write': /kisskb/src/net/ipv4/tcp_output.c:661:1: error: label at end of compound statement out_ao: ^ /kisskb/src/net/ipv4/tcp_output.c: At top level: cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror] cc1: all warnings being treated as errors make[5]: *** [/kisskb/src/scripts/Makefile.build:243: net/ipv4/tcp_output.o] Error 1 make[5]: *** Waiting for unfinished jobs.... make[4]: *** [/kisskb/src/scripts/Makefile.build:480: net/ipv4] Error 2 make[4]: *** Waiting for unfinished jobs.... make[3]: *** [/kisskb/src/scripts/Makefile.build:480: net] Error 2 make[3]: *** Waiting for unfinished jobs.... /kisskb/src/fs/bcachefs/mean_and_variance.c: In function 'u128_div': /kisskb/src/fs/bcachefs/mean_and_variance.c:47:8: note: the ABI of passing aggregates with 16-byte alignment has changed in GCC 5 u128_u u128_div(u128_u n, u64 d) ^ In file included from /kisskb/src/fs/bcachefs/mean_and_variance_test.c:4:0: /kisskb/src/fs/bcachefs/mean_and_variance.h: In function 'u128_add': /kisskb/src/fs/bcachefs/mean_and_variance.h:38:22: note: the ABI of passing aggregates with 16-byte alignment has changed in GCC 5 static inline u128_u u128_add(u128_u a, u128_u b) ^ In file included from :0:0: /kisskb/src/drivers/edac/versal_edac.c: In function 'mc_probe': /kisskb/src/include/linux/compiler_types.h:435:38: error: call to '__compiletime_assert_655' declared with attribute error: FIELD_PREP: value too large for the field _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ /kisskb/src/include/linux/compiler_types.h:416:4: note: in definition of macro '__compiletime_assert' prefix ## suffix(); \ ^ /kisskb/src/include/linux/compiler_types.h:435:2: note: in expansion of macro '_compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ /kisskb/src/include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert' #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) ^ /kisskb/src/include/linux/bitfield.h:68:3: note: in expansion of macro 'BUILD_BUG_ON_MSG' BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ? \ ^ /kisskb/src/include/linux/bitfield.h:114:3: note: in expansion of macro '__BF_FIELD_CHECK' __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \ ^ /kisskb/src/drivers/edac/versal_edac.c:969:14: note: in expansion of macro 'FIELD_PREP' num_chans = FIELD_PREP(XDDR_REG_CONFIG0_NUM_CHANS_MASK, regval); ^ /kisskb/src/drivers/edac/versal_edac.c: At top level: cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror] cc1: all warnings being treated as errors make[5]: *** [/kisskb/src/scripts/Makefile.build:243: drivers/edac/versal_edac.o] Error 1 make[4]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/edac] Error 2 make[4]: *** Waiting for unfinished jobs.... In file included from /kisskb/src/include/ufs/ufshcd.h:27:0, from /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:12: /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_40bit_rmmi': /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:28:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[0].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:28:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:29:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[1].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:29:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:30:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[2].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:30:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:31:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[3].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:31:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:32:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[4].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:32:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:33:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[5].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:33:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:34:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[6].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:34:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:51:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[15].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:51:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:52:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[16].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:52:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:75:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[28].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:75:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_20bit_rmmi_lane0': /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:107:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[8].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:107:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:108:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[9].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:108:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:127:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[19].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:127:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_20bit_rmmi': /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:221:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[0].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:221:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:222:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[1].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:222:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:223:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[2].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:223:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:224:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[3].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:224:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:225:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[4].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:225:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:226:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[5].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:226:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:227:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[6].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:227:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: At top level: cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror] cc1: all warnings being treated as errors make[6]: *** [/kisskb/src/scripts/Makefile.build:243: drivers/ufs/host/tc-dwc-g210.o] Error 1 make[6]: *** Waiting for unfinished jobs.... make[5]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/ufs/host] Error 2 make[4]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/ufs] Error 2 In file included from /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:35:0: /kisskb/src/drivers/media/platform/nxp/imx-pxp.c: In function 'pxp_setup_csc': /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:374:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt601_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:374:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:391:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt601_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:391:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:408:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_rec709_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:408:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:425:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_rec709_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:425:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:442:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt2020_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:442:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:459:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt2020_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:459:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:476:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_smpte240m_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:476:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:493:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_smpte240m_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:493:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c: At top level: cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror] cc1: all warnings being treated as errors make[7]: *** [/kisskb/src/scripts/Makefile.build:243: drivers/media/platform/nxp/imx-pxp.o] Error 1 make[6]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/media/platform/nxp] Error 2 make[6]: *** Waiting for unfinished jobs.... make[5]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/media/platform] Error 2 make[5]: *** Waiting for unfinished jobs.... make[4]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/media] Error 2 make[3]: *** [/kisskb/src/scripts/Makefile.build:480: drivers] Error 2 make[2]: *** [/kisskb/src/Makefile:1913: .] Error 2 make[1]: *** [/kisskb/src/Makefile:234: __sub-make] Error 2 make: *** [Makefile:234: __sub-make] Error 2 Command 'make -s -j 24 ARCH=powerpc O=/kisskb/build/linus_allyesconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- ' returned non-zero exit status 2. # rm -rf /kisskb/build/linus_allyesconfig_powerpc-gcc5 # Build took: 0:27:22.887070