# git rev-parse -q --verify 3b8a9b2e6809d281890dd0a1102dc14d2cd11caf^{commit} 3b8a9b2e6809d281890dd0a1102dc14d2cd11caf already have revision, skipping fetch # git checkout -q -f -B kisskb 3b8a9b2e6809d281890dd0a1102dc14d2cd11caf # git clean -qxdf # < git log -1 # commit 3b8a9b2e6809d281890dd0a1102dc14d2cd11caf # Merge: c8e97fc6b4c0 712292308af2 # Author: Linus Torvalds # Date: Sat Dec 16 10:40:51 2023 -0800 # # Merge tag 'trace-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace # # Pull tracing fixes from Steven Rostedt: # # - Fix eventfs to check creating new files for events with names greater # than NAME_MAX. The eventfs lookup needs to check the return result of # simple_lookup(). # # - Fix the ring buffer to check the proper max data size. Events must be # able to fit on the ring buffer sub-buffer, if it cannot, then it # fails to be written and the logic to add the event is avoided. The # code to check if an event can fit failed to add the possible absolute # timestamp which may make the event not be able to fit. This causes # the ring buffer to go into an infinite loop trying to find a # sub-buffer that would fit the event. Luckily, there's a check that # will bail out if it looped over a 1000 times and it also warns. # # The real fix is not to add the absolute timestamp to an event that is # starting at the beginning of a sub-buffer because it uses the # sub-buffer timestamp. # # By avoiding the timestamp at the start of the sub-buffer allows # events that pass the first check to always find a sub-buffer that it # can fit on. # # - Have large events that do not fit on a trace_seq to print "LINE TOO # BIG" like it does for the trace_pipe instead of what it does now # which is to silently drop the output. # # - Fix a memory leak of forgetting to free the spare page that is saved # by a trace instance. # # - Update the size of the snapshot buffer when the main buffer is # updated if the snapshot buffer is allocated. # # - Fix ring buffer timestamp logic by removing all the places that tried # to put the before_stamp back to the write stamp so that the next # event doesn't add an absolute timestamp. But each of these updates # added a race where by making the two timestamp equal, it was # validating the write_stamp so that it can be incorrectly used for # calculating the delta of an event. # # - There's a temp buffer used for printing the event that was using the # event data size for allocation when it needed to use the size of the # entire event (meta-data and payload data) # # - For hardening, use "%.*s" for printing the trace_marker output, to # limit the amount that is printed by the size of the event. This was # discovered by development that added a bug that truncated the '\0' # and caused a crash. # # - Fix a use-after-free bug in the use of the histogram files when an # instance is being removed. # # - Remove a useless update in the rb_try_to_discard of the write_stamp. # The before_stamp was already changed to force the next event to add # an absolute timestamp that the write_stamp is not used. But the # write_stamp is modified again using an unneeded 64-bit cmpxchg. # # - Fix several races in the 32-bit implementation of the # rb_time_cmpxchg() that does a 64-bit cmpxchg. # # - While looking at fixing the 64-bit cmpxchg, I noticed that because # the ring buffer uses normal cmpxchg, and this can be done in NMI # context, there's some architectures that do not have a working # cmpxchg in NMI context. For these architectures, fail recording # events that happen in NMI context. # # * tag 'trace-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: # ring-buffer: Do not record in NMI if the arch does not support cmpxchg in NMI # ring-buffer: Have rb_time_cmpxchg() set the msb counter too # ring-buffer: Fix 32-bit rb_time_read() race with rb_time_cmpxchg() # ring-buffer: Fix a race in rb_time_cmpxchg() for 32 bit archs # ring-buffer: Remove useless update to write_stamp in rb_try_to_discard() # ring-buffer: Do not try to put back write_stamp # tracing: Fix uaf issue when open the hist or hist_debug file # tracing: Add size check when printing trace_marker output # ring-buffer: Have saved event hold the entire event # ring-buffer: Do not update before stamp when switching sub-buffers # tracing: Update snapshot buffer on resize if it is allocated # ring-buffer: Fix memory leak of free page # eventfs: Fix events beyond NAME_MAX blocking tasks # tracing: Have large events show up as '[LINE TOO BIG]' instead of nothing # ring-buffer: Fix writing to the buffer with max_data_size # < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc --version # < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld --version # < git log --format=%s --max-count=1 3b8a9b2e6809d281890dd0a1102dc14d2cd11caf # make -s -j 40 ARCH=powerpc O=/kisskb/build/linus_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- allmodconfig # Added to kconfig CONFIG_BUILD_DOCSRC=n # Added to kconfig CONFIG_SAMPLES=n # Added to kconfig CONFIG_OPTIMIZE_INLINING=n # Added to kconfig CONFIG_BPF_PRELOAD=n # Added to kconfig CONFIG_GCC_PLUGINS=n # Added to kconfig # < make -s -j 40 ARCH=powerpc O=/kisskb/build/linus_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- help # make -s -j 40 ARCH=powerpc O=/kisskb/build/linus_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- olddefconfig # make -s -j 40 ARCH=powerpc O=/kisskb/build/linus_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:305.19-326.5 /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:329.19-344.5 arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" /kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:58.7-84.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:116.7-142.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:102.7-129.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:102.7-129.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:43.7-69.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:53.9-68.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:65.7-90.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/pdm360ng.dts:172.13-185.5 arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:342.15-351.5: Warning (pci_device_reg): /pci@e0008000/i8259@19000: PCI unit address format error, expected "12,0" /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:331.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) In file included from /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:35:0: /kisskb/src/drivers/media/platform/nxp/imx-pxp.c: In function 'pxp_setup_csc': /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:374:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt601_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:374:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:391:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt601_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:391:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:408:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_rec709_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:408:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:425:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_rec709_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:425:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:442:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt2020_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:442:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:459:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt2020_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:459:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:476:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_smpte240m_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:476:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:493:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_smpte240m_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:493:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c: At top level: cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror] cc1: all warnings being treated as errors make[7]: *** [/kisskb/src/scripts/Makefile.build:243: drivers/media/platform/nxp/imx-pxp.o] Error 1 make[6]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/media/platform/nxp] Error 2 make[6]: *** Waiting for unfinished jobs.... make[5]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/media/platform] Error 2 make[5]: *** Waiting for unfinished jobs.... In file included from /kisskb/src/include/ufs/ufshcd.h:27:0, from /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:12: /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_40bit_rmmi': /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:28:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[0].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:28:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:29:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[1].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:29:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:30:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[2].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:30:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:31:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[3].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:31:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:32:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[4].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:32:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:33:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[5].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:33:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:34:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[6].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:34:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:51:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[15].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:51:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:52:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[16].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:52:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:75:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[28].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:75:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_20bit_rmmi_lane0': /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:107:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[8].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:107:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:108:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[9].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:108:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:127:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[19].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:127:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_20bit_rmmi': /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:221:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[0].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:221:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:222:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[1].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:222:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:223:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[2].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:223:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:224:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[3].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:224:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:225:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[4].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:225:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:226:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[5].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:226:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:227:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:303:36: note: (near initialization for 'setup_attrs[6].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:305:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:227:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: At top level: cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror] cc1: all warnings being treated as errors make[6]: *** [/kisskb/src/scripts/Makefile.build:243: drivers/ufs/host/tc-dwc-g210.o] Error 1 make[5]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/ufs/host] Error 2 make[5]: *** Waiting for unfinished jobs.... /kisskb/src/fs/bcachefs/mean_and_variance.c: In function 'u128_div': /kisskb/src/fs/bcachefs/mean_and_variance.c:47:8: note: the ABI of passing aggregates with 16-byte alignment has changed in GCC 5 u128_u u128_div(u128_u n, u64 d) ^ make[4]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/ufs] Error 2 make[4]: *** Waiting for unfinished jobs.... In file included from /kisskb/src/fs/bcachefs/mean_and_variance_test.c:4:0: /kisskb/src/fs/bcachefs/mean_and_variance.h: In function 'u128_add': /kisskb/src/fs/bcachefs/mean_and_variance.h:38:22: note: the ABI of passing aggregates with 16-byte alignment has changed in GCC 5 static inline u128_u u128_add(u128_u a, u128_u b) ^ make[4]: *** [/kisskb/src/scripts/Makefile.build:480: drivers/media] Error 2 make[3]: *** [/kisskb/src/scripts/Makefile.build:480: drivers] Error 2 make[2]: *** [/kisskb/src/Makefile:1911: .] Error 2 make[1]: *** [/kisskb/src/Makefile:234: __sub-make] Error 2 make: *** [Makefile:234: __sub-make] Error 2 Command 'make -s -j 40 ARCH=powerpc O=/kisskb/build/linus_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- ' returned non-zero exit status 2. # rm -rf /kisskb/build/linus_allmodconfig_powerpc-gcc5 # Build took: 0:07:49.254826