Buildresult: powerpc-next/powerpc-allmodconfig/powerpc-gcc5 built on Apr 30, 02:46
kisskb
Revisions
|
Branches
|
Compilers
|
Configs
|
Build Results
|
Build Failures
|
Status:
Failed
Date/Time:
Apr 30, 02:46
Duration:
0:08:46.530941
Builder:
ka4
Revision:
selftests/powerpc: Install tests in sub-directories (
dda32e37d397f5937cc24a6e98b71d3645f51afa)
Target:
powerpc-next/powerpc-allmodconfig/powerpc-gcc5
Branch:
powerpc-next
Compiler:
powerpc-gcc5
(powerpc64-linux-gcc (GCC) 5.5.0 / GNU ld (GNU Binutils) 2.29.1.20170915)
Config:
allmodconfig
(
download
)
Log:
Download original
Possible errors
arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" arch/powerpc/boot/dts/fsp2.dts:399.16-404.5: Warning (interrupt_provider): /plb4/l2-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:420.18-425.5: Warning (interrupt_provider): /plb4/opbd-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:427.17-432.5: Warning (interrupt_provider): /plb4/cmu-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:434.18-439.5: Warning (interrupt_provider): /plb4/conf-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" arch/powerpc/boot/dts/stxssa8555.dts:342.15-351.5: Warning (pci_device_reg): /pci@e0008000/i8259@19000: PCI unit address format error, expected "12,0" drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror] cc1: error: unrecognized command line option '-Wno-stringop-overflow' [-Werror] cc1: all warnings being treated as errors make[7]: *** [scripts/Makefile.build:244: drivers/media/platform/nxp/imx-pxp.o] Error 1 make[6]: *** [scripts/Makefile.build:485: drivers/media/platform/nxp] Error 2 make[5]: *** [scripts/Makefile.build:485: drivers/media/platform] Error 2 include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant include/ufs/ufshci.h:306:36: error: initializer element is not constant cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror] cc1: error: unrecognized command line option '-Wno-stringop-overflow' [-Werror] cc1: all warnings being treated as errors make[6]: *** [scripts/Makefile.build:244: drivers/ufs/host/tc-dwc-g210.o] Error 1 make[5]: *** [scripts/Makefile.build:485: drivers/ufs/host] Error 2 make[4]: *** [scripts/Makefile.build:485: drivers/ufs] Error 2 make[4]: *** [scripts/Makefile.build:485: drivers/media] Error 2 drivers/gpu/drm/msm/adreno/adreno_gen7_0_0_snapshot.h:924:19: error: 'gen7_0_0_external_core_regs' defined but not used [-Werror=unused-variable] drivers/gpu/drm/msm/adreno/adreno_gen7_2_0_snapshot.h:748:19: error: 'gen7_2_0_external_core_regs' defined but not used [-Werror=unused-variable] cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror] cc1: error: unrecognized command line option '-Wno-stringop-overflow' [-Werror] cc1: all warnings being treated as errors make[7]: *** [scripts/Makefile.build:244: drivers/gpu/drm/msm/adreno/a6xx_gpu_state.o] Error 1 make[6]: *** [scripts/Makefile.build:485: drivers/gpu/drm/msm] Error 2 make[5]: *** [scripts/Makefile.build:485: drivers/gpu/drm] Error 2 make[4]: *** [scripts/Makefile.build:485: drivers/gpu] Error 2 make[3]: *** [scripts/Makefile.build:485: drivers] Error 2 make[2]: *** [Makefile:1919: .] Error 2 make[1]: *** [Makefile:240: __sub-make] Error 2 make: *** [Makefile:240: __sub-make] Error 2
Possible warnings (146)
arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/a3m071.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5121.dtsi:508.20-525.4: Warning (interrupt_provider): /pci@80008500: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/ac14xx.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/amigaone.dts:57.9-163.5: Warning (interrupt_provider): /pci@80000000/isa@7: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/amigaone.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/cm5200.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/ep8248e.dts:101.13-190.5: Warning (interrupt_provider): /soc@f0000000/cpm@119c0: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/ep8248e.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/ep88xc.dts:122.13-131.5: Warning (interrupt_provider): /soc@fa200000/pcmcia@80: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/ep88xc.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsp2.dts:392.24-397.5: Warning (interrupt_provider): /plb4/plb6-system-hung-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:399.16-404.5: Warning (interrupt_provider): /plb4/l2-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:406.17-411.5: Warning (interrupt_provider): /plb4/plb6-plb4-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:413.16-418.5: Warning (interrupt_provider): /plb4/plb4-ahb-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:420.18-425.5: Warning (interrupt_provider): /plb4/opbd-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:427.17-432.5: Warning (interrupt_provider): /plb4/cmu-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:434.18-439.5: Warning (interrupt_provider): /plb4/conf-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:441.13-446.5: Warning (interrupt_provider): /plb4/mc-ue-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:448.21-453.5: Warning (interrupt_provider): /plb4/reset-warning-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:195.22-209.4: Warning (interrupt_provider): /pcie@fef08000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/gef_sbc310.dts:217.22-231.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/gef_sbc310.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dts:193.22-207.4: Warning (interrupt_provider): /pcie@fef08000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi:154.11-204.6: Warning (interrupt_provider): /pcie@e000b000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8544ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@fffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (interrupt_provider): /pcie@f1008000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (interrupt_provider): /pcie@f1009000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mgcoge.dts:105.13-230.5: Warning (interrupt_provider): /soc@f0000000/cpm@119c0: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/mgcoge.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/motionpro.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/mpc885ads.dts:127.13-136.5: Warning (interrupt_provider): /soc@ff000000/pcmcia@80: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/mpc885ads.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mvme5100.dts:155.7-177.5: Warning (interrupt_provider): /pci@feff0000/isa: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/mvme5100.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2d.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2d300.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2dnt2.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2i.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2mnt.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o3dnt.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/p2020ds.dtsi:274.11-324.6: Warning (interrupt_provider): /pcie@ffe09000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/p2020ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:53.9-68.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5121.dtsi:508.20-525.4: Warning (interrupt_provider): /pci@80008500: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/pdm360ng.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (interrupt_provider): /pci@fe0008000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (interrupt_provider): /pci@fe0009000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/sam440ep.dts:266.22-287.5: Warning (interrupt_provider): /plb/pci@ec000000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/sam440ep.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/stxssa8555.dts:342.15-351.5: Warning (pci_device_reg): /pci@e0008000/i8259@19000: PCI unit address format error, expected "12,0" arch/powerpc/boot/dts/stxssa8555.dts:331.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/uc101.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
Full Log
# git rev-parse -q --verify dda32e37d397f5937cc24a6e98b71d3645f51afa^{commit} dda32e37d397f5937cc24a6e98b71d3645f51afa already have revision, skipping fetch # git checkout -q -f -B kisskb dda32e37d397f5937cc24a6e98b71d3645f51afa # git clean -qxdf # < git log -1 # commit dda32e37d397f5937cc24a6e98b71d3645f51afa # Author: Michael Ellerman <mpe@ellerman.id.au> # Date: Mon Apr 22 23:34:53 2024 +1000 # # selftests/powerpc: Install tests in sub-directories # # The sources for the powerpc selftests are arranged into sub-directories. # However when the tests are built and installed, the sub-directories are # squashed, losing the structure. # # For example, with the current code the result of installing the selftests is: # # $ tree tools/testing/selftests/kselftest_install # tools/testing/selftests/kselftest_install # ├── kselftest # │ ├── ktap_helpers.sh # │ ├── module.sh # │ ├── prefix.pl # │ └── runner.sh # ├── kselftest-list.txt # ├── powerpc # │ ├── alignment_handler # │ ├── attr_test # │ ├── back_to_back_ebbs_test # │ ├── bad_accesses # │ ├── bhrb_filter_map_test # │ ├── bhrb_no_crash_wo_pmu_test # │ ├── blacklisted_events_test # │ ├── cache_shape # │ ├── close_clears_pmcc_test # │ ├── context_switch # │ ├── copy_first_unaligned # ... # │ ├── settings # ... # │ └── wild_bctr # └── run_kselftest.sh # # All the powerpc tests are squashed into the single powerpc directory. In # particular, note that there is a single `settings` file, even though # there are multiple settings files in the powerpc selftest sources. One # of the settings files ends up installed, depending on install order, # even if they have different contents. # # Similarly if there were two tests with the same name in different # sub-directories they would clobber each other. # # Fix it by replicating the directory structure of the source tree into # the install directory. The result being for example: # # $ tree tools/testing/selftests/kselftest_install # tools/testing/selftests/kselftest_install # ├── kselftest # │ ├── ktap_helpers.sh # │ ├── module.sh # │ ├── prefix.pl # │ └── runner.sh # ├── kselftest-list.txt # ├── powerpc # │ ├── alignment # │ │ ├── alignment_handler # │ │ └── copy_first_unaligned # │ ├── benchmarks # │ │ ├── context_switch # │ │ ├── exec_target # │ │ ├── fork # │ │ ├── futex_bench # │ │ ├── gettimeofday # │ │ ├── mmap_bench # │ │ ├── null_syscall # │ │ └── settings # ... # │ ├── eeh # │ │ ├── eeh-basic.sh # │ │ ├── eeh-functions.sh # │ │ └── settings # ... # │ └── vphn # │ └── test-vphn # └── run_kselftest.sh # # Note multiple settings files in different sub-directories. # # This change also has the effect of changing the names of the tests from # the point of view of the kselftest runner. Before the tests are named # eg: # # powerpc:copy_first_unaligned # powerpc:cache_shape # powerpc:reg_access_test # # After, the test collection names include the sub-directory: # # powerpc/alignment:copy_first_unaligned # powerpc/cache_shape:cache_shape # powerpc/pmu/ebb:reg_access_test # # That means whereas previously all powerpc tests could be run with: # # $ ./run_kselftest.sh -c powerpc # # After the change it's necessary to pass a regex that matches all powerpc # entries, eg: # # $ ./run_kselftest.sh -c "powerpc.*" # # The latter form also works before and after the change. # # Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> # Link: https://msgid.link/20240422133453.1793988-2-mpe@ellerman.id.au # < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc --version # < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld --version # < git log --format=%s --max-count=1 dda32e37d397f5937cc24a6e98b71d3645f51afa # make -s -j 40 ARCH=powerpc O=/kisskb/build/powerpc-next_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- allmodconfig # Added to kconfig CONFIG_SAMPLES=n # Added to kconfig CONFIG_GCC_PLUGINS=n # Added to kconfig # < make -s -j 40 ARCH=powerpc O=/kisskb/build/powerpc-next_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- help # make -s -j 40 ARCH=powerpc O=/kisskb/build/powerpc-next_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- olddefconfig # make -s -j 40 ARCH=powerpc O=/kisskb/build/powerpc-next_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/a3m071.dts:135.15-137.4 arch/powerpc/boot/dts/a3m071.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:305.19-326.5 /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:329.19-344.5 arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:508.20-525.4: Warning (interrupt_provider): /pci@80008500: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/ac14xx.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/amigaone.dts:57.9-163.5: Warning (interrupt_provider): /pci@80000000/isa@7: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/amigaone.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/cm5200.dts:70.15-72.4 arch/powerpc/boot/dts/cm5200.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/ep8248e.dts:101.13-190.5: Warning (interrupt_provider): /soc@f0000000/cpm@119c0: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/ep8248e.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/ep88xc.dts:122.13-131.5: Warning (interrupt_provider): /soc@fa200000/pcmcia@80: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/ep88xc.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:392.24-397.5: Warning (interrupt_provider): /plb4/plb6-system-hung-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:399.16-404.5: Warning (interrupt_provider): /plb4/l2-error-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:406.17-411.5: Warning (interrupt_provider): /plb4/plb6-plb4-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:413.16-418.5: Warning (interrupt_provider): /plb4/plb4-ahb-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:420.18-425.5: Warning (interrupt_provider): /plb4/opbd-error-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:427.17-432.5: Warning (interrupt_provider): /plb4/cmu-error-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:434.18-439.5: Warning (interrupt_provider): /plb4/conf-error-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:441.13-446.5: Warning (interrupt_provider): /plb4/mc-ue-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:448.21-453.5: Warning (interrupt_provider): /plb4/reset-warning-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:195.22-209.4: Warning (interrupt_provider): /pcie@fef08000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc310.dts:217.22-231.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 arch/powerpc/boot/dts/fsl/gef_sbc310.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:193.22-207.4: Warning (interrupt_provider): /pcie@fef08000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi:154.11-204.6: Warning (interrupt_provider): /pcie@e000b000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8544ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@fffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (interrupt_provider): /pcie@f1008000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (interrupt_provider): /pcie@f1009000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mgcoge.dts:105.13-230.5: Warning (interrupt_provider): /soc@f0000000/cpm@119c0: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/mgcoge.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:58.7-84.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:116.7-142.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/motionpro.dts:84.15-86.4 arch/powerpc/boot/dts/motionpro.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/mpc885ads.dts:127.13-136.5: Warning (interrupt_provider): /soc@ff000000/pcmcia@80: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/mpc885ads.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mvme5100.dts:155.7-177.5: Warning (interrupt_provider): /pci@feff0000/isa: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/mvme5100.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2d.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2d300.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2dnt2.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2i.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2mnt.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o3dnt.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020ds.dtsi:274.11-324.6: Warning (interrupt_provider): /pcie@ffe09000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/p2020ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:102.7-129.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:43.7-69.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:53.9-68.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:102.7-129.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/pdm360ng.dts:172.13-185.5 arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:508.20-525.4: Warning (interrupt_provider): /pci@80008500: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/pdm360ng.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:65.7-90.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (interrupt_provider): /pci@fe0008000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (interrupt_provider): /pci@fe0009000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3 arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/sam440ep.dts:266.22-287.5: Warning (interrupt_provider): /plb/pci@ec000000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/sam440ep.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:342.15-351.5: Warning (pci_device_reg): /pci@e0008000/i8259@19000: PCI unit address format error, expected "12,0" /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:331.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/uc101.dts:100.15-102.4 arch/powerpc/boot/dts/uc101.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' In file included from /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:35:0: /kisskb/src/drivers/media/platform/nxp/imx-pxp.c: In function 'pxp_setup_csc': /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:374:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt601_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:374:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:391:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt601_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:391:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:408:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_rec709_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:408:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:425:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_rec709_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:425:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:442:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt2020_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:442:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:459:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt2020_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:459:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:476:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_smpte240m_lim[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:476:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:493:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_smpte240m_full[0]') #define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000 ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c:493:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE' BM_PXP_CSC1_COEF0_YCBCR_MODE | ^ /kisskb/src/drivers/media/platform/nxp/imx-pxp.c: At top level: cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror] cc1: error: unrecognized command line option '-Wno-stringop-overflow' [-Werror] cc1: all warnings being treated as errors make[7]: *** [/kisskb/src/scripts/Makefile.build:244: drivers/media/platform/nxp/imx-pxp.o] Error 1 make[6]: *** [/kisskb/src/scripts/Makefile.build:485: drivers/media/platform/nxp] Error 2 make[6]: *** Waiting for unfinished jobs.... make[5]: *** [/kisskb/src/scripts/Makefile.build:485: drivers/media/platform] Error 2 make[5]: *** Waiting for unfinished jobs.... In file included from /kisskb/src/include/ufs/ufshcd.h:28:0, from /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:12: /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_40bit_rmmi': /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:28:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[0].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:28:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:29:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[1].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:29:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:30:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[2].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:30:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:31:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[3].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:31:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:32:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[4].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:32:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:33:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[5].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:33:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:34:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[6].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:34:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:51:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[15].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:51:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:52:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[16].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:52:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:75:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[28].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:75:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_20bit_rmmi_lane0': /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:107:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[8].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:107:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:108:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[9].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:108:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:127:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[19].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:127:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_20bit_rmmi': /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:221:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[0].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:221:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:222:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[1].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:222:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:223:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[2].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:223:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:224:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[3].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:224:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:225:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[4].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:225:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:226:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[5].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:226:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:227:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:306:36: note: (near initialization for 'setup_attrs[6].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ ^ /kisskb/src/include/ufs/ufshci.h:308:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:227:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: At top level: cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror] cc1: error: unrecognized command line option '-Wno-stringop-overflow' [-Werror] cc1: all warnings being treated as errors make[6]: *** [/kisskb/src/scripts/Makefile.build:244: drivers/ufs/host/tc-dwc-g210.o] Error 1 make[6]: *** Waiting for unfinished jobs.... make[5]: *** [/kisskb/src/scripts/Makefile.build:485: drivers/ufs/host] Error 2 make[5]: *** Waiting for unfinished jobs.... make[4]: *** [/kisskb/src/scripts/Makefile.build:485: drivers/ufs] Error 2 make[4]: *** Waiting for unfinished jobs.... make[4]: *** [/kisskb/src/scripts/Makefile.build:485: drivers/media] Error 2 In file included from /kisskb/src/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:17:0: /kisskb/src/drivers/gpu/drm/msm/adreno/adreno_gen7_0_0_snapshot.h:924:19: error: 'gen7_0_0_external_core_regs' defined but not used [-Werror=unused-variable] static const u32 *gen7_0_0_external_core_regs[] = { ^ In file included from /kisskb/src/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:18:0: /kisskb/src/drivers/gpu/drm/msm/adreno/adreno_gen7_2_0_snapshot.h:748:19: error: 'gen7_2_0_external_core_regs' defined but not used [-Werror=unused-variable] static const u32 *gen7_2_0_external_core_regs[] = { ^ cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror] cc1: error: unrecognized command line option '-Wno-stringop-overflow' [-Werror] cc1: all warnings being treated as errors make[7]: *** [/kisskb/src/scripts/Makefile.build:244: drivers/gpu/drm/msm/adreno/a6xx_gpu_state.o] Error 1 make[7]: *** Waiting for unfinished jobs.... make[6]: *** [/kisskb/src/scripts/Makefile.build:485: drivers/gpu/drm/msm] Error 2 make[6]: *** Waiting for unfinished jobs.... make[5]: *** [/kisskb/src/scripts/Makefile.build:485: drivers/gpu/drm] Error 2 make[4]: *** [/kisskb/src/scripts/Makefile.build:485: drivers/gpu] Error 2 make[3]: *** [/kisskb/src/scripts/Makefile.build:485: drivers] Error 2 make[2]: *** [/kisskb/src/Makefile:1919: .] Error 2 make[1]: *** [/kisskb/src/Makefile:240: __sub-make] Error 2 make: *** [Makefile:240: __sub-make] Error 2 Command 'make -s -j 40 ARCH=powerpc O=/kisskb/build/powerpc-next_allmodconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- ' returned non-zero exit status 2. # rm -rf /kisskb/build/powerpc-next_allmodconfig_powerpc-gcc5 # Build took: 0:08:46.530941
© Michael Ellerman 2006-2018.