# git gc
Expanding reachable commits in commit graph: 54780
Expanding reachable commits in commit graph: 112799
Expanding reachable commits in commit graph: 171684
Expanding reachable commits in commit graph: 231692
Expanding reachable commits in commit graph: 291206
Expanding reachable commits in commit graph: 352518
Expanding reachable commits in commit graph: 413940
Expanding reachable commits in commit graph: 475751
Expanding reachable commits in commit graph: 534693
Expanding reachable commits in commit graph: 597054
Expanding reachable commits in commit graph: 658863
Expanding reachable commits in commit graph: 705194
Expanding reachable commits in commit graph: 739465
Expanding reachable commits in commit graph: 779725
Expanding reachable commits in commit graph: 808983
Expanding reachable commits in commit graph: 842184
Expanding reachable commits in commit graph: 875123
Expanding reachable commits in commit graph: 907694
Expanding reachable commits in commit graph: 941054
Expanding reachable commits in commit graph: 973369
Expanding reachable commits in commit graph: 1003743
Expanding reachable commits in commit graph: 1033570
Expanding reachable commits in commit graph: 1052828
Expanding reachable commits in commit graph: 1079188
Expanding reachable commits in commit graph: 1117568
Expanding reachable commits in commit graph: 1152292
Expanding reachable commits in commit graph: 1189267
Expanding reachable commits in commit graph: 1218341
Expanding reachable commits in commit graph: 1252467
Expanding reachable commits in commit graph: 1287584
Expanding reachable commits in commit graph: 1308889, done.
Finding extra edges in commit graph:  11% (147186/1308889)
Finding extra edges in commit graph:  12% (157067/1308889)
Finding extra edges in commit graph:  13% (170156/1308889)
Finding extra edges in commit graph:  14% (183245/1308889)
Finding extra edges in commit graph:  15% (196334/1308889)
Finding extra edges in commit graph:  16% (209423/1308889)
Finding extra edges in commit graph:  17% (222512/1308889)
Finding extra edges in commit graph:  18% (235601/1308889)
Finding extra edges in commit graph:  19% (248689/1308889)
Finding extra edges in commit graph:  20% (261778/1308889)
Finding extra edges in commit graph:  21% (274867/1308889)
Finding extra edges in commit graph:  22% (287956/1308889)
Finding extra edges in commit graph:  23% (301045/1308889)
Finding extra edges in commit graph:  24% (314134/1308889)
Finding extra edges in commit graph:  25% (327223/1308889)
Finding extra edges in commit graph:  26% (340312/1308889)
Finding extra edges in commit graph:  27% (353401/1308889)
Finding extra edges in commit graph:  28% (366489/1308889)
Finding extra edges in commit graph:  29% (379578/1308889)
Finding extra edges in commit graph:  30% (392667/1308889)
Finding extra edges in commit graph:  31% (405756/1308889)
Finding extra edges in commit graph:  32% (418845/1308889)
Finding extra edges in commit graph:  33% (431934/1308889)
Finding extra edges in commit graph:  34% (445023/1308889)
Finding extra edges in commit graph:  35% (458112/1308889)
Finding extra edges in commit graph:  36% (471201/1308889)
Finding extra edges in commit graph:  37% (484289/1308889)
Finding extra edges in commit graph:  38% (497378/1308889)
Finding extra edges in commit graph:  39% (510467/1308889)
Finding extra edges in commit graph:  40% (523556/1308889)
Finding extra edges in commit graph:  41% (536645/1308889)
Finding extra edges in commit graph:  42% (549734/1308889)
Finding extra edges in commit graph:  43% (562823/1308889)
Finding extra edges in commit graph:  44% (575912/1308889)
Finding extra edges in commit graph:  45% (589001/1308889)
Finding extra edges in commit graph:  46% (602089/1308889)
Finding extra edges in commit graph:  47% (615178/1308889)
Finding extra edges in commit graph:  48% (628267/1308889)
Finding extra edges in commit graph:  49% (641356/1308889)
Finding extra edges in commit graph:  50% (654445/1308889)
Finding extra edges in commit graph:  51% (667534/1308889)
Finding extra edges in commit graph:  52% (680623/1308889)
Finding extra edges in commit graph:  53% (693712/1308889)
Finding extra edges in commit graph:  54% (706801/1308889)
Finding extra edges in commit graph:  55% (719889/1308889)
Finding extra edges in commit graph:  56% (732978/1308889)
Finding extra edges in commit graph:  57% (746067/1308889)
Finding extra edges in commit graph:  58% (759156/1308889)
Finding extra edges in commit graph:  59% (772245/1308889)
Finding extra edges in commit graph:  60% (785334/1308889)
Finding extra edges in commit graph:  61% (798423/1308889)
Finding extra edges in commit graph:  62% (811512/1308889)
Finding extra edges in commit graph:  63% (824601/1308889)
Finding extra edges in commit graph:  64% (837689/1308889)
Finding extra edges in commit graph:  65% (850778/1308889)
Finding extra edges in commit graph:  66% (863867/1308889)
Finding extra edges in commit graph:  67% (876956/1308889)
Finding extra edges in commit graph:  68% (890045/1308889)
Finding extra edges in commit graph:  69% (903134/1308889)
Finding extra edges in commit graph:  70% (916223/1308889)
Finding extra edges in commit graph:  71% (929312/1308889)
Finding extra edges in commit graph:  72% (942401/1308889)
Finding extra edges in commit graph:  73% (955489/1308889)
Finding extra edges in commit graph:  74% (968578/1308889)
Finding extra edges in commit graph:  75% (981667/1308889)
Finding extra edges in commit graph:  76% (994756/1308889)
Finding extra edges in commit graph:  77% (1007845/1308889)
Finding extra edges in commit graph:  78% (1020934/1308889)
Finding extra edges in commit graph:  79% (1034023/1308889)
Finding extra edges in commit graph:  80% (1047112/1308889)
Finding extra edges in commit graph:  81% (1060201/1308889)
Finding extra edges in commit graph:  82% (1073289/1308889)
Finding extra edges in commit graph:  83% (1086378/1308889)
Finding extra edges in commit graph:  84% (1099467/1308889)
Finding extra edges in commit graph:  85% (1112556/1308889)
Finding extra edges in commit graph:  86% (1125645/1308889)
Finding extra edges in commit graph:  87% (1138734/1308889)
Finding extra edges in commit graph:  88% (1151823/1308889)
Finding extra edges in commit graph:  89% (1164912/1308889)
Finding extra edges in commit graph:  90% (1178001/1308889)
Finding extra edges in commit graph:  91% (1191089/1308889)
Finding extra edges in commit graph:  92% (1204178/1308889)
Finding extra edges in commit graph:  93% (1217267/1308889)
Finding extra edges in commit graph:  94% (1230356/1308889)
Finding extra edges in commit graph:  95% (1243445/1308889)
Finding extra edges in commit graph:  96% (1256534/1308889)
Finding extra edges in commit graph:  97% (1269623/1308889)
Finding extra edges in commit graph:  98% (1282712/1308889)
Finding extra edges in commit graph:  99% (1295801/1308889)
Finding extra edges in commit graph: 100% (1308889/1308889)
Finding extra edges in commit graph: 100% (1308889/1308889), done.
Writing out commit graph in 4 passes:  49% (2599022/5235556)
Writing out commit graph in 4 passes:  50% (2617778/5235556)
Writing out commit graph in 4 passes:  51% (2670134/5235556)
Writing out commit graph in 4 passes:  52% (2722490/5235556)
Writing out commit graph in 4 passes:  52% (2774011/5235556)
Writing out commit graph in 4 passes:  53% (2774845/5235556)
Writing out commit graph in 4 passes:  54% (2827201/5235556)
Writing out commit graph in 4 passes:  55% (2879556/5235556)
Writing out commit graph in 4 passes:  56% (2931912/5235556)
Writing out commit graph in 4 passes:  56% (2944395/5235556)
Writing out commit graph in 4 passes:  57% (2984267/5235556)
Writing out commit graph in 4 passes:  58% (3036623/5235556)
Writing out commit graph in 4 passes:  59% (3088979/5235556)
Writing out commit graph in 4 passes:  59% (3126215/5235556)
Writing out commit graph in 4 passes:  60% (3141334/5235556)
Writing out commit graph in 4 passes:  61% (3193690/5235556)
Writing out commit graph in 4 passes:  62% (3246045/5235556)
Writing out commit graph in 4 passes:  62% (3292299/5235556)
Writing out commit graph in 4 passes:  63% (3298401/5235556)
Writing out commit graph in 4 passes:  64% (3350756/5235556)
Writing out commit graph in 4 passes:  65% (3403112/5235556)
Writing out commit graph in 4 passes:  65% (3437966/5235556)
Writing out commit graph in 4 passes:  66% (3455467/5235556)
Writing out commit graph in 4 passes:  67% (3507823/5235556)
Writing out commit graph in 4 passes:  68% (3560179/5235556)
Writing out commit graph in 4 passes:  68% (3588669/5235556)
Writing out commit graph in 4 passes:  69% (3612534/5235556)
Writing out commit graph in 4 passes:  70% (3664890/5235556)
Writing out commit graph in 4 passes:  71% (3717245/5235556)
Writing out commit graph in 4 passes:  71% (3750567/5235556)
Writing out commit graph in 4 passes:  72% (3769601/5235556)
Writing out commit graph in 4 passes:  73% (3821956/5235556)
Writing out commit graph in 4 passes:  74% (3874312/5235556)
Writing out commit graph in 4 passes:  75% (3926667/5235556)
Writing out commit graph in 4 passes:  76% (3979023/5235556)
Writing out commit graph in 4 passes:  76% (4002726/5235556)
Writing out commit graph in 4 passes:  77% (4031379/5235556)
Writing out commit graph in 4 passes:  78% (4083734/5235556)
Writing out commit graph in 4 passes:  79% (4136090/5235556)
Writing out commit graph in 4 passes:  80% (4188445/5235556)
Writing out commit graph in 4 passes:  81% (4240801/5235556)
Writing out commit graph in 4 passes:  82% (4293156/5235556)
Writing out commit graph in 4 passes:  83% (4345512/5235556)
Writing out commit graph in 4 passes:  84% (4397868/5235556)
Writing out commit graph in 4 passes:  85% (4450223/5235556)
Writing out commit graph in 4 passes:  86% (4502579/5235556)
Writing out commit graph in 4 passes:  87% (4554934/5235556)
Writing out commit graph in 4 passes:  88% (4607290/5235556)
Writing out commit graph in 4 passes:  89% (4659645/5235556)
Writing out commit graph in 4 passes:  90% (4712001/5235556)
Writing out commit graph in 4 passes:  91% (4764356/5235556)
Writing out commit graph in 4 passes:  92% (4816712/5235556)
Writing out commit graph in 4 passes:  93% (4869068/5235556)
Writing out commit graph in 4 passes:  94% (4921423/5235556)
Writing out commit graph in 4 passes:  95% (4973779/5235556)
Writing out commit graph in 4 passes:  96% (5026134/5235556)
Writing out commit graph in 4 passes:  97% (5078490/5235556)
Writing out commit graph in 4 passes:  98% (5130845/5235556)
Writing out commit graph in 4 passes:  99% (5183201/5235556)
Writing out commit graph in 4 passes: 100% (5235556/5235556)
Writing out commit graph in 4 passes: 100% (5235556/5235556), done.
# git rev-parse -q --verify 0c559323bbaabee7346c12e74b497e283aaafef5^{commit}
0c559323bbaabee7346c12e74b497e283aaafef5
already have revision, skipping fetch
# git checkout -q -f -B kisskb 0c559323bbaabee7346c12e74b497e283aaafef5
# git clean -qxdf
# < git log -1
# commit 0c559323bbaabee7346c12e74b497e283aaafef5
# Merge: 263a25de5b60 05cef2c4a421
# Author: Linus Torvalds <torvalds@linux-foundation.org>
# Date:   Thu Oct 3 17:15:09 2024 -0700
# 
#     Merge tag 'rust-fixes-6.12' of https://github.com/Rust-for-Linux/linux
#     
#     Pull Rust fixes from Miguel Ojeda:
#      "Toolchain and infrastructure:
#     
#        - Fix/improve a couple 'depends on' on the newly added CFI/KASAN
#          suppport to avoid build errors/warnings
#     
#        - Fix ARCH_SLAB_MINALIGN multiple definition error for RISC-V under
#          !CONFIG_MMU
#     
#        - Clean upcoming (Rust 1.83.0) Clippy warnings
#     
#       'kernel' crate:
#     
#        - 'sync' module: fix soundness issue by requiring 'T: Sync' for
#          'LockedBy::access'; and fix helpers build error under PREEMPT_RT
#     
#        - Fix trivial sorting issue ('rustfmtcheck') on the v6.12 Rust merge"
#     
#     * tag 'rust-fixes-6.12' of https://github.com/Rust-for-Linux/linux:
#       rust: kunit: use C-string literals to clean warning
#       cfi: encode cfi normalized integers + kasan/gcov bug in Kconfig
#       rust: KASAN+RETHUNK requires rustc 1.83.0
#       rust: cfi: fix `patchable-function-entry` starting version
#       rust: mutex: fix __mutex_init() usage in case of PREEMPT_RT
#       rust: fix `ARCH_SLAB_MINALIGN` multiple definition error
#       rust: sync: require `T: Sync` for `LockedBy::access`
#       rust: kernel: sort Rust modules
# < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc --version
# < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld --version
# < git log --format=%s --max-count=1 0c559323bbaabee7346c12e74b497e283aaafef5
# make -s -j 160 ARCH=powerpc O=/kisskb/build/linus_allyesconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-  allyesconfig

WARNING: unmet direct dependencies detected for MODVERSIONS
  Depends on [n]: MODULES [=y] && !COMPILE_TEST [=y]
  Selected by [y]:
  - RANDSTRUCT_FULL [=y] && (CC_HAS_RANDSTRUCT [=n] || GCC_PLUGINS [=y]) && MODULES [=y]
# Added to kconfig CONFIG_PROFILE_ALL_BRANCHES=n
# Added to kconfig CONFIG_ENABLE_WARN_DEPRECATED=n
# Added to kconfig CONFIG_ENABLE_MUST_CHECK=n
# Added to kconfig CONFIG_DEBUG_INFO=n
# Added to kconfig CONFIG_BUILD_DOCSRC=n
# Added to kconfig CONFIG_MODULE_SIG=n
# Added to kconfig CONFIG_GCC_PLUGINS=n
# Added to kconfig CONFIG_SAMPLES=n
# < make -s -j 160 ARCH=powerpc O=/kisskb/build/linus_allyesconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-  help
# make -s -j 160 ARCH=powerpc O=/kisskb/build/linus_allyesconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-  olddefconfig
# make -s -j 160 ARCH=powerpc O=/kisskb/build/linus_allyesconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-  
/kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider
  also defined at /kisskb/src/arch/powerpc/boot/dts/a3m071.dts:135.15-137.4
arch/powerpc/boot/dts/a3m071.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi'
  also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:305.19-326.5
/kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi'
  also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:329.19-344.5
arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
/kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:508.20-525.4: Warning (interrupt_provider): /pci@80008500: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/ac14xx.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/amigaone.dts:57.9-163.5: Warning (interrupt_provider): /pci@80000000/isa@7: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/amigaone.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c"
/kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider
  also defined at /kisskb/src/arch/powerpc/boot/dts/cm5200.dts:70.15-72.4
arch/powerpc/boot/dts/cm5200.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/ep8248e.dts:101.13-190.5: Warning (interrupt_provider): /soc@f0000000/cpm@119c0: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/ep8248e.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/ep88xc.dts:122.13-131.5: Warning (interrupt_provider): /soc@fa200000/pcmcia@80: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/ep88xc.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/fsp2.dts:392.24-397.5: Warning (interrupt_provider): /plb4/plb6-system-hung-irq: '#interrupt-cells' found, but node is not an interrupt provider
/kisskb/src/arch/powerpc/boot/dts/fsp2.dts:399.16-404.5: Warning (interrupt_provider): /plb4/l2-error-irq: '#interrupt-cells' found, but node is not an interrupt provider
/kisskb/src/arch/powerpc/boot/dts/fsp2.dts:406.17-411.5: Warning (interrupt_provider): /plb4/plb6-plb4-irq: '#interrupt-cells' found, but node is not an interrupt provider
/kisskb/src/arch/powerpc/boot/dts/fsp2.dts:413.16-418.5: Warning (interrupt_provider): /plb4/plb4-ahb-irq: '#interrupt-cells' found, but node is not an interrupt provider
/kisskb/src/arch/powerpc/boot/dts/fsp2.dts:420.18-425.5: Warning (interrupt_provider): /plb4/opbd-error-irq: '#interrupt-cells' found, but node is not an interrupt provider
/kisskb/src/arch/powerpc/boot/dts/fsp2.dts:427.17-432.5: Warning (interrupt_provider): /plb4/cmu-error-irq: '#interrupt-cells' found, but node is not an interrupt provider
/kisskb/src/arch/powerpc/boot/dts/fsp2.dts:434.18-439.5: Warning (interrupt_provider): /plb4/conf-error-irq: '#interrupt-cells' found, but node is not an interrupt provider
/kisskb/src/arch/powerpc/boot/dts/fsp2.dts:441.13-446.5: Warning (interrupt_provider): /plb4/mc-ue-irq: '#interrupt-cells' found, but node is not an interrupt provider
/kisskb/src/arch/powerpc/boot/dts/fsp2.dts:448.21-453.5: Warning (interrupt_provider): /plb4/reset-warning-irq: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/fsp2.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:195.22-209.4: Warning (interrupt_provider): /pcie@fef08000: '#interrupt-cells' found, but node is not an interrupt provider
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3
/kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3
arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc310.dts:217.22-231.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3
arch/powerpc/boot/dts/fsl/gef_sbc310.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:193.22-207.4: Warning (interrupt_provider): /pcie@fef08000: '#interrupt-cells' found, but node is not an interrupt provider
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3
/kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3
arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:87.7-113.3
/kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi:154.11-204.6: Warning (interrupt_provider): /pcie@e000b000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/fsl/mpc8544ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/fsl/mpc8572ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@fffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/mgcoge.dts:105.13-230.5: Warning (interrupt_provider): /soc@f0000000/cpm@119c0: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/mgcoge.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider
  also defined at /kisskb/src/arch/powerpc/boot/dts/motionpro.dts:84.15-86.4
arch/powerpc/boot/dts/motionpro.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge)
/kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property
/kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (interrupt_provider): /pcie@f1008000: '#interrupt-cells' found, but node is not an interrupt provider
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3
/kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (interrupt_provider): /pcie@f1009000: '#interrupt-cells' found, but node is not an interrupt provider
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3
arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:58.7-84.3
/kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge)
/kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:87.7-113.3
/kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge)
/kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:116.7-142.3
/kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1"
/kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2"
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/mpc885ads.dts:127.13-136.5: Warning (interrupt_provider): /soc@ff000000/pcmcia@80: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/mpc885ads.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/mvme5100.dts:155.7-177.5: Warning (interrupt_provider): /pci@feff0000/isa: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/mvme5100.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/o2d.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/o2d300.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/o2dnt2.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/o2i.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/o2mnt.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/o3dnt.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi'
  also defined at /kisskb/src/arch/powerpc/boot/dts/pdm360ng.dts:172.13-185.5
arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
/kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:508.20-525.4: Warning (interrupt_provider): /pci@80008500: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/pdm360ng.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/sam440ep.dts:266.22-287.5: Warning (interrupt_provider): /plb/pci@ec000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/sam440ep.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16
/kisskb/src/arch/powerpc/boot/dts/fsl/p2020ds.dtsi:274.11-324.6: Warning (interrupt_provider): /pcie@ffe09000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider
arch/powerpc/boot/dts/fsl/p2020ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:102.7-129.3
/kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:102.7-129.3
/kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:342.15-351.5: Warning (pci_device_reg): /pci@e0008000/i8259@19000: PCI unit address format error, expected "12,0"
/kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:331.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0)
/kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:43.7-69.3
/kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:53.9-68.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3
/kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3
/kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge)
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:65.7-90.3
/kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge)
arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (interrupt_provider): /pci@fe0008000: '#interrupt-cells' found, but node is not an interrupt provider
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3
/kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (interrupt_provider): /pci@fe0009000: '#interrupt-cells' found, but node is not an interrupt provider
  also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3
arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider
  also defined at /kisskb/src/arch/powerpc/boot/dts/uc101.dts:100.15-102.4
arch/powerpc/boot/dts/uc101.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
/kisskb/src/fs/bcachefs/ec.c: In function 'bch2_stripes_heap_update':
/kisskb/src/fs/bcachefs/ec.c:1125:1: internal compiler error: in validate_condition_mode, at config/rs6000/rs6000.c:16415
 }
 ^
Please submit a full bug report,
with preprocessed source if appropriate.
See <http://gcc.gnu.org/bugs.html> for instructions.
make[5]: *** [/kisskb/src/scripts/Makefile.build:229: fs/bcachefs/ec.o] Error 1
make[5]: *** Waiting for unfinished jobs....
make[4]: *** [/kisskb/src/scripts/Makefile.build:478: fs/bcachefs] Error 2
make[4]: *** Waiting for unfinished jobs....
In file included from /kisskb/src/include/ufs/ufshcd.h:29:0,
                 from /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:12:
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_40bit_rmmi':
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:28:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[0].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:28:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:29:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[1].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:29:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:30:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[2].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:30:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:31:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[3].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:31:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:32:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[4].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:32:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:33:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[5].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:33:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:34:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[6].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:34:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:51:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[15].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:51:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:52:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[16].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:52:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:75:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[28].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:75:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
     ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_20bit_rmmi_lane0':
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:107:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[8].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:107:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:108:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[9].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:108:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:127:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[19].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:127:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
     ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_20bit_rmmi':
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:221:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[0].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:221:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:222:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[1].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:222:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:223:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[2].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:223:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:224:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[3].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:224:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:225:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[4].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:225:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:226:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[5].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:226:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:227:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
     ^
/kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[6].attr_sel')
 #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
                                    ^
/kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL'
 #define UIC_ARG_MIB(attr)  UIC_ARG_MIB_SEL(attr, 0)
                            ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c:227:5: note: in expansion of macro 'UIC_ARG_MIB'
   { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
     ^
/kisskb/src/drivers/ufs/host/tc-dwc-g210.c: At top level:
cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror]
cc1: error: unrecognized command line option '-Wno-stringop-overflow' [-Werror]
cc1: all warnings being treated as errors
make[6]: *** [/kisskb/src/scripts/Makefile.build:229: drivers/ufs/host/tc-dwc-g210.o] Error 1
make[6]: *** Waiting for unfinished jobs....
make[5]: *** [/kisskb/src/scripts/Makefile.build:478: drivers/ufs/host] Error 2
make[5]: *** Waiting for unfinished jobs....
make[4]: *** [/kisskb/src/scripts/Makefile.build:478: drivers/ufs] Error 2
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [/kisskb/src/scripts/Makefile.build:478: fs] Error 2
make[3]: *** Waiting for unfinished jobs....
make[3]: *** [/kisskb/src/scripts/Makefile.build:478: drivers] Error 2
make[2]: *** [/kisskb/src/Makefile:1936: .] Error 2
make[1]: *** [/kisskb/src/Makefile:224: __sub-make] Error 2
make: *** [Makefile:224: __sub-make] Error 2
Command 'make -s -j 160 ARCH=powerpc O=/kisskb/build/linus_allyesconfig_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-  ' returned non-zero exit status 2.
# rm -rf /kisskb/build/linus_allyesconfig_powerpc-gcc5
# Build took: 0:15:44.239694