Buildresult: powerpc-next/powerpc-allmodconfig+4K_PAGES/powerpc-gcc5 built on Nov 11, 00:22

kisskb

Revisions | Branches | Compilers | Configs | Build Results | Build Failures |

Status:	Failed
Date/Time:	Nov 11, 00:22
Duration:	0:12:05.846028
Builder:	alpine2
Revision:	powerpc/irq: use seq_put_decimal_ull_width() for decimal values (`039936ff8e5da48c7f91ededdd3b6d38c8739452)`
Target:	powerpc-next/powerpc-allmodconfig+4K_PAGES/powerpc-gcc5
Branch:	powerpc-next
Compiler:	powerpc-gcc5 (powerpc64-linux-gcc (GCC) 5.5.0 / GNU ld (GNU Binutils) 2.29.1.20170915)
Config:	allmodconfig+4K_PAGES (download)
Log:	Download original Possible errors arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" arch/powerpc/boot/dts/fsp2.dts:399.16-404.5: Warning (interrupt_provider): /plb4/l2-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:420.18-425.5: Warning (interrupt_provider): /plb4/opbd-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:427.17-432.5: Warning (interrupt_provider): /plb4/cmu-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:434.18-439.5: Warning (interrupt_provider): /plb4/conf-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" arch/powerpc/boot/dts/stxssa8555.dts:342.15-351.5: Warning (pci_device_reg): /pci@e0008000/i8259@19000: PCI unit address format error, expected "12,0" fs/bcachefs/ec.c:1125:1: internal compiler error: in validate_condition_mode, at config/rs6000/rs6000.c:16415 make[5]: * [scripts/Makefile.build:229: fs/bcachefs/ec.o] Error 1 make[4]: * [scripts/Makefile.build:478: fs/bcachefs] Error 2 include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant include/ufs/ufshci.h:310:36: error: initializer element is not constant cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror] cc1: error: unrecognized command line option '-Wno-stringop-overflow' [-Werror] cc1: all warnings being treated as errors make[6]: * [scripts/Makefile.build:229: drivers/ufs/host/tc-dwc-g210.o] Error 1 make[5]: * [scripts/Makefile.build:478: drivers/ufs/host] Error 2 make[4]: * [scripts/Makefile.build:478: drivers/ufs] Error 2 make[3]: * [scripts/Makefile.build:478: fs] Error 2 make[3]: * [scripts/Makefile.build:478: drivers] Error 2 make[2]: * [Makefile:1936: .] Error 2 make[1]: * [Makefile:224: __sub-make] Error 2 make: * [Makefile:224: __sub-make] Error 2 Possible warnings (147) .config:15846:warning: override: reassigning to symbol PPC_4K_PAGES arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/a3m071.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5121.dtsi:508.20-525.4: Warning (interrupt_provider): /pci@80008500: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/ac14xx.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/amigaone.dts:57.9-163.5: Warning (interrupt_provider): /pci@80000000/isa@7: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/amigaone.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/cm5200.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/ep8248e.dts:101.13-190.5: Warning (interrupt_provider): /soc@f0000000/cpm@119c0: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/ep8248e.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/ep88xc.dts:122.13-131.5: Warning (interrupt_provider): /soc@fa200000/pcmcia@80: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/ep88xc.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsp2.dts:392.24-397.5: Warning (interrupt_provider): /plb4/plb6-system-hung-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:399.16-404.5: Warning (interrupt_provider): /plb4/l2-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:406.17-411.5: Warning (interrupt_provider): /plb4/plb6-plb4-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:413.16-418.5: Warning (interrupt_provider): /plb4/plb4-ahb-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:420.18-425.5: Warning (interrupt_provider): /plb4/opbd-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:427.17-432.5: Warning (interrupt_provider): /plb4/cmu-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:434.18-439.5: Warning (interrupt_provider): /plb4/conf-error-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:441.13-446.5: Warning (interrupt_provider): /plb4/mc-ue-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dts:448.21-453.5: Warning (interrupt_provider): /plb4/reset-warning-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:195.22-209.4: Warning (interrupt_provider): /pcie@fef08000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/gef_sbc310.dts:217.22-231.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/gef_sbc310.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dts:193.22-207.4: Warning (interrupt_provider): /pcie@fef08000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi:154.11-204.6: Warning (interrupt_provider): /pcie@e000b000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8544ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@fffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mgcoge.dts:105.13-230.5: Warning (interrupt_provider): /soc@f0000000/cpm@119c0: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/mgcoge.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/motionpro.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (interrupt_provider): /pcie@f1008000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (interrupt_provider): /pcie@f1009000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/mpc885ads.dts:127.13-136.5: Warning (interrupt_provider): /soc@ff000000/pcmcia@80: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/mpc885ads.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mvme5100.dts:155.7-177.5: Warning (interrupt_provider): /pci@feff0000/isa: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/mvme5100.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2d.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2d300.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2dnt2.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2i.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2mnt.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o3dnt.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/powerpc/boot/dts/mpc5121.dtsi:508.20-525.4: Warning (interrupt_provider): /pci@80008500: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/pdm360ng.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/p2020ds.dtsi:274.11-324.6: Warning (interrupt_provider): /pcie@ffe09000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/p2020ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/sam440ep.dts:266.22-287.5: Warning (interrupt_provider): /plb/pci@ec000000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/sam440ep.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:53.9-68.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (interrupt_provider): /pci@fe0008000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (interrupt_provider): /pci@fe0009000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' arch/powerpc/boot/dts/stxssa8555.dts:342.15-351.5: Warning (pci_device_reg): /pci@e0008000/i8259@19000: PCI unit address format error, expected "12,0" arch/powerpc/boot/dts/stxssa8555.dts:331.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/uc101.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' Full Log # git rev-parse -q --verify 039936ff8e5da48c7f91ededdd3b6d38c8739452^{commit} 039936ff8e5da48c7f91ededdd3b6d38c8739452 already have revision, skipping fetch # git checkout -q -f -B kisskb 039936ff8e5da48c7f91ededdd3b6d38c8739452 # git clean -qxdf # < git log -1 # commit 039936ff8e5da48c7f91ededdd3b6d38c8739452 # Author: David Wang <00107082@163.com> # Date: Sat Nov 9 00:23:27 2024 +0800 # # powerpc/irq: use seq_put_decimal_ull_width() for decimal values # # On a system with n CPUs and m interrupts, there will be nm decimal # values yielded via seq_printf(.."%10u "..) which is less efficient # than seq_put_decimal_ull_width(), stress reading /proc/interrupts # indicates ~30% performance improvement with this patch. # # Signed-off-by: David Wang <00107082@163.com> # [mpe: Flesh out change log based on original submission] # Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> # Link: https://lore.kernel.org/all/20241103080552.4787-1-00107082@163.com # Link: https://patch.msgid.link/20241108162327.9887-1-00107082@163.com # < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc --version # < /opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld --version # < git log --format=%s --max-count=1 039936ff8e5da48c7f91ededdd3b6d38c8739452 # make -s -j 160 ARCH=powerpc O=/kisskb/build/powerpc-next_allmodconfig+4K_PAGES_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- allmodconfig # Added to kconfig CONFIG_BUILD_DOCSRC=n # Added to kconfig CONFIG_MODULE_SIG=n # Added to kconfig CONFIG_SAMPLES=n # Added to kconfig CONFIG_PPC_4K_PAGES=y # Added to kconfig CONFIG_PPC_64K_PAGES=n # Added to kconfig CONFIG_OPTIMIZE_INLINING=n # Added to kconfig CONFIG_GCC_PLUGINS=n # Added to kconfig # < make -s -j 160 ARCH=powerpc O=/kisskb/build/powerpc-next_allmodconfig+4K_PAGES_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- help # make -s -j 160 ARCH=powerpc O=/kisskb/build/powerpc-next_allmodconfig+4K_PAGES_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- olddefconfig .config:15846:warning: override: reassigning to symbol PPC_4K_PAGES # make -s -j 160 ARCH=powerpc O=/kisskb/build/powerpc-next_allmodconfig+4K_PAGES_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/a3m071.dts:135.15-137.4 arch/powerpc/boot/dts/a3m071.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:397.13-406.5: Warning (spi_bus_bridge): /soc@80000000/psc@11400: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:305.19-326.5 /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:409.13-418.5: Warning (spi_bus_bridge): /soc@80000000/psc@11500: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/ac14xx.dts:329.19-344.5 arch/powerpc/boot/dts/ac14xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:508.20-525.4: Warning (interrupt_provider): /pci@80008500: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/ac14xx.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/amigaone.dts:57.9-163.5: Warning (interrupt_provider): /pci@80000000/isa@7: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/amigaone.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/bluestone.dts:272.13-277.7: Warning (i2c_bus_reg): /plb/opb/i2c@ef600700/sttm@4C: I2C bus unit address format error, expected "4c" /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/cm5200.dts:70.15-72.4 arch/powerpc/boot/dts/cm5200.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/ep8248e.dts:101.13-190.5: Warning (interrupt_provider): /soc@f0000000/cpm@119c0: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/ep8248e.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/ep88xc.dts:122.13-131.5: Warning (interrupt_provider): /soc@fa200000/pcmcia@80: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/ep88xc.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:392.24-397.5: Warning (interrupt_provider): /plb4/plb6-system-hung-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:399.16-404.5: Warning (interrupt_provider): /plb4/l2-error-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:406.17-411.5: Warning (interrupt_provider): /plb4/plb6-plb4-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:413.16-418.5: Warning (interrupt_provider): /plb4/plb4-ahb-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:420.18-425.5: Warning (interrupt_provider): /plb4/opbd-error-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:427.17-432.5: Warning (interrupt_provider): /plb4/cmu-error-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:434.18-439.5: Warning (interrupt_provider): /plb4/conf-error-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:441.13-446.5: Warning (interrupt_provider): /plb4/mc-ue-irq: '#interrupt-cells' found, but node is not an interrupt provider /kisskb/src/arch/powerpc/boot/dts/fsp2.dts:448.21-453.5: Warning (interrupt_provider): /plb4/reset-warning-irq: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsp2.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:195.22-209.4: Warning (interrupt_provider): /pcie@fef08000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts:211.22-213.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 arch/powerpc/boot/dts/fsl/gef_ppc9a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc310.dts:217.22-231.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 arch/powerpc/boot/dts/fsl/gef_sbc310.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (pci_bridge): /pcie@fef09000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@fef09000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:193.22-207.4: Warning (interrupt_provider): /pcie@fef08000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/gef_sbc610.dts:209.22-211.4: Warning (interrupt_provider): /pcie@fef09000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 arch/powerpc/boot/dts/fsl/gef_sbc610.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/kmcoge4.dts:196.23-198.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/kmcoge4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi:154.11-204.6: Warning (interrupt_provider): /pcie@e000b000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8544ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@fffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mgcoge.dts:105.13-230.5: Warning (interrupt_provider): /soc@f0000000/cpm@119c0: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/mgcoge.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/motionpro.dts:84.15-86.4 arch/powerpc/boot/dts/motionpro.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (pci_bridge): /pcie@f1008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:102.9-116.4: Warning (pci_bridge): /pcie@f1008000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (pci_bridge): /pcie@f1009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:129.9-143.4: Warning (pci_bridge): /pcie@f1009000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:30.11-32.6: Warning (i2c_bus_reg): /soc@f1000000/i2c@3000/rtc@68: missing or empty reg property /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:135.22-137.4: Warning (interrupt_provider): /pcie@f1008000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:92.7-117.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mvme7100.dts:139.22-141.4: Warning (interrupt_provider): /pcie@f1009000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi:119.7-144.3 arch/powerpc/boot/dts/fsl/mvme7100.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:132.23-134.4: Warning (pci_bridge): /pcie@ffe200000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:58.7-84.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:68.9-83.4: Warning (pci_bridge): /pcie@ffe200000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:136.23-138.4: Warning (pci_bridge): /pcie@ffe201000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:87.7-113.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:97.9-112.4: Warning (pci_bridge): /pcie@ffe201000/pcie@0: missing ranges for PCI bridge (or not a bridge) /kisskb/src/arch/powerpc/boot/dts/fsl/oca4080.dts:140.23-142.4: Warning (pci_bridge): /pcie@ffe202000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:116.7-142.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi:126.9-141.4: Warning (pci_bridge): /pcie@ffe202000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/oca4080.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:189.11-193.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@0: SPI bus unit address format error, expected "1" /kisskb/src/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts:195.11-199.6: Warning (spi_bus_reg): /soc@ffe00000/spi@7000/slic@1: SPI bus unit address format error, expected "2" /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/mpc885ads.dts:127.13-136.5: Warning (interrupt_provider): /soc@ff000000/pcmcia@80: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/mpc885ads.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mvme5100.dts:155.7-177.5: Warning (interrupt_provider): /pci@feff0000/isa: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/mvme5100.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2d.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2d300.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2dnt2.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2i.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o2mnt.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/o3dnt.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@ffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@0:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi:38.2-25: Warning (interrupts_property): /soc@fffe00000/mdio@24000/ethernet-phy@1:#interrupt-cells: size is (8), expected multiple of 16 /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@80000000/psc@11900: node name for SPI buses should be 'spi' also defined at /kisskb/src/arch/powerpc/boot/dts/pdm360ng.dts:172.13-185.5 arch/powerpc/boot/dts/pdm360ng.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' /kisskb/src/arch/powerpc/boot/dts/mpc5121.dtsi:508.20-525.4: Warning (interrupt_provider): /pci@80008500: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/pdm360ng.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020ds.dtsi:274.11-324.6: Warning (interrupt_provider): /pcie@ffe09000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/fsl/p2020ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts:59.22-62.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:102.7-129.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts:59.23-62.4: Warning (pci_bridge): /pcie@fffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:102.7-129.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:112.9-128.4: Warning (pci_bridge): /pcie@fffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/sam440ep.dts:266.22-287.5: Warning (interrupt_provider): /plb/pci@ec000000: '#interrupt-cells' found, but node is not an interrupt provider arch/powerpc/boot/dts/sam440ep.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/fsl/p2020rdb.dts:251.22-254.4: Warning (pci_bridge): /pcie@ffe08000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:43.7-69.3 /kisskb/src/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi:53.9-68.4: Warning (pci_bridge): /pcie@ffe08000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/p2020rdb.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (pci_bridge): /pci@fe0008000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (pci_bridge): /pci@fe0009000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:44.23-47.4: Warning (pci_bridge): /pcie@fe000a000: missing ranges for PCI bridge (or not a bridge) also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:65.7-90.3 /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:74.9-89.4: Warning (pci_bridge): /pcie@fe000a000/pcie@0: missing ranges for PCI bridge (or not a bridge) arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:34.22-37.4: Warning (interrupt_provider): /pci@fe0008000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:43.7-51.3 /kisskb/src/arch/powerpc/boot/dts/fsl/ppa8548.dts:39.22-42.4: Warning (interrupt_provider): /pci@fe0009000: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi:54.7-62.3 arch/powerpc/boot/dts/fsl/ppa8548.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:342.15-351.5: Warning (pci_device_reg): /pci@e0008000/i8259@19000: PCI unit address format error, expected "12,0" /kisskb/src/arch/powerpc/boot/dts/stxssa8555.dts:331.3-21: Warning (pci_device_bus_num): /pci@e0008000/i8259@19000:bus-range: PCI bus number 1 out of range, expected (0 - 0) /kisskb/src/arch/powerpc/boot/dts/mpc5200b.dtsi:267.20-282.4: Warning (interrupt_provider): /pci@f0000d00: '#interrupt-cells' found, but node is not an interrupt provider also defined at /kisskb/src/arch/powerpc/boot/dts/uc101.dts:100.15-102.4 arch/powerpc/boot/dts/uc101.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' /kisskb/src/fs/bcachefs/ec.c: In function 'bch2_stripes_heap_update': /kisskb/src/fs/bcachefs/ec.c:1125:1: internal compiler error: in validate_condition_mode, at config/rs6000/rs6000.c:16415 } ^ Please submit a full bug report, with preprocessed source if appropriate. See <http://gcc.gnu.org/bugs.html> for instructions. make[5]: [/kisskb/src/scripts/Makefile.build:229: fs/bcachefs/ec.o] Error 1 make[4]: * [/kisskb/src/scripts/Makefile.build:478: fs/bcachefs] Error 2 make[4]: * Waiting for unfinished jobs.... In file included from /kisskb/src/include/ufs/ufshcd.h:29:0, from /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:12: /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_40bit_rmmi': /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:28:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[0].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:28:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:29:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[1].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:29:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:30:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[2].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:30:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:31:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[3].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:31:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:32:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[4].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:32:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:33:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[5].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:33:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:34:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[6].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:34:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:51:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[15].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:51:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:52:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[16].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:52:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:75:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[28].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:75:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_20bit_rmmi_lane0': /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:107:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[8].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:107:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:108:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[9].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:108:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:127:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[19].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:127:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: In function 'tc_dwc_g210_setup_20bit_rmmi': /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:221:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[0].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:221:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:222:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[1].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:222:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:223:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[2].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:223:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:224:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[3].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:224:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:225:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[4].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:225:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:226:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[5].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:226:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: error: initializer element is not constant #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:227:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/include/ufs/ufshci.h:310:36: note: (near initialization for 'setup_attrs[6].attr_sel') #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) \|\ ^ /kisskb/src/include/ufs/ufshci.h:312:28: note: in expansion of macro 'UIC_ARG_MIB_SEL' #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c:227:5: note: in expansion of macro 'UIC_ARG_MIB' { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, ^ /kisskb/src/drivers/ufs/host/tc-dwc-g210.c: At top level: cc1: error: unrecognized command line option '-Wno-shift-negative-value' [-Werror] cc1: error: unrecognized command line option '-Wno-stringop-overflow' [-Werror] cc1: all warnings being treated as errors make[6]: * [/kisskb/src/scripts/Makefile.build:229: drivers/ufs/host/tc-dwc-g210.o] Error 1 make[6]: * Waiting for unfinished jobs.... make[5]: * [/kisskb/src/scripts/Makefile.build:478: drivers/ufs/host] Error 2 make[5]: * Waiting for unfinished jobs.... make[4]: * [/kisskb/src/scripts/Makefile.build:478: drivers/ufs] Error 2 make[4]: * Waiting for unfinished jobs.... make[3]: * [/kisskb/src/scripts/Makefile.build:478: fs] Error 2 make[3]: * Waiting for unfinished jobs.... make[3]: * [/kisskb/src/scripts/Makefile.build:478: drivers] Error 2 make[2]: * [/kisskb/src/Makefile:1936: .] Error 2 make[1]: * [/kisskb/src/Makefile:224: __sub-make] Error 2 make: *** [Makefile:224: __sub-make] Error 2 Command 'make -s -j 160 ARCH=powerpc O=/kisskb/build/powerpc-next_allmodconfig+4K_PAGES_powerpc-gcc5 CROSS_COMPILE=/opt/cross/kisskb/korg/gcc-5.5.0-nolibc/powerpc64-linux/bin/powerpc64-linux- ' returned non-zero exit status 2. # rm -rf /kisskb/build/powerpc-next_allmodconfig+4K_PAGES_powerpc-gcc5 # Build took: 0:12:05.846028

© Michael Ellerman 2006-2018.